-
Anonymous users2024-02-07To install the Ford wing pulse generator belt, first use a wrench to twist the tensioner screw of the Ford wing pulse generator belt counterclockwise, loosen the Ford wing pulse tensioner screw, and then pull the Ford wing beat generator belt back and forth with your hand to loosen the belt, and after the Ford wing beat generator belt becomes loose, remove the Ford wing beat generator belt from the generator's pulley; The specific steps are as follows:
1. Use a wrench to twist the tensioner screw of the Ford wingbeat generator belt counterclockwise.
2. After loosening the screws of the Ford wing pulse tensioner, pull the belt of the Ford wing pulse generator back and forth with your hand to loosen the belt.
3. After the belt of the Ford wing beat generator becomes loose, remove the Ford wing beat generator belt from the pulley of the generator.
4. Hang up the belt of the new Ford wingbeat generator.
5. Start the Ford wing pulse engine and check whether the Ford wing pulse belt rotates normally.
6. Lock the Ford wing tensioner and the operation is completed.
-
Anonymous users2024-02-06Coke plus ice cubes your car needs to check the power generation, the engine appears Dadada sound because the battery is not enough to start the current is not enough, the engine stall on the road may be caused by the generator does not generate electricity, resulting in the whole car voltage is too low, but your car in addition to check the power generation, but also check the gasoline pump.
-
Anonymous users2024-02-051. Use a wrench to twist the tensioner screw of the Ford Date wing pulse generator belt counterclockwise. 2. After loosening the screws of the Ford wing pulse tensioner, pull the Ford wing pulse generator belt back and forth with your hand to loosen the belt. 3. After the Ford wing beat generator belt becomes loose, remove the Ford wing beat generator belt from the generator pulley.
4. Hang up the belt of the new Ford wingbeat generator.
To install the Ford wing pulse generator belt, first use a wrench to twist the tensioner screw of the Ford wing pulse generator belt counterclockwise, loosen the Ford wing pulse tensioner screw, and then pull the Ford wing beat generator belt back and forth with your hand to loosen the belt, and after the Ford wing beat generator belt becomes loose, remove the Ford wing beat generator belt from the generator's pulley;
The method of Ford Focus generator belt installation is:
1. Turn off the engine and let the mold hall cool, open the engine cover to find the generator belt in front of the engine. If you press more than 1 2 inches, the belt is loose, and the loose belt will affect the performance of the generator or even damage the belt. Detect the oil or grease contamination of the generator belt, flip the belt to detect whether there are cracks, missing rubber blocks and slippage in the inner layer;
2. Loosen the adjustment bolt of the development motor and adjust the pivot bolt. Move the generator inward to release the belt. Peel the generator belt off the pulley before removing the generator belt;
3. Compare the removed old belt with the new belt, and install the new belt after confirmation. Pull the generator outward until the belt is tight, making sure the generator belt is installed in the right position;
4. Strictly follow the manufacturer's instructions to adjust the pivot bolts. Start the engine to verify the repair results, and check the tightness of the belt after shutting down the engine.
Photo by Q&A) Mercedes-Benz S-Class M5 Ideal One Buick GL8 Xpeng P5 Xpeng Motors P7 @2019
-
Anonymous users2024-02-04Tools required: wrench, oil pump.
1. First clean the contact surface between the cylinder block and the sealing ring of the water pump.
2. Install the water pump bolt after applying lubricating liquid to the water pump sealing ring.
3. Install the main wheel of the belt with the leakage hand.
4. Install the camshaft and timing belt shaft.
5. Install a non-critical timing idler.
6. Install the belt after that.
7. After installing the belt, install the timing shell, so that the generator belt is hanged.
The new machine changes the oil once every 8-10 hours. After 150-200 hours, replace the oil, filter element, filter screen, and spark plug.
Flexible packaging. At present, the most popular packaging in the market is the simple flexible packaging of the stretch film for diesel generators. The packaging cost is cheap, the packaging is simple, mainly used for short-distance transportation, the current diesel generator is low, the profit is low, and the generator manufacturers are the same as the use of the most cheap packaging. >>>More
It can be excluded from the following points:1Check whether the length of the brush is too short to reach the lifeline, resulting in too little pressure and the brush cannot touch the slip ring; 2. >>>More
Tools required: wrench, oil pump.
1. Clean the contact surface between the cylinder block and the water pump sealing ring first. >>>More
Provide specific models, I will help you find.