What should I do if I can t use my new computer and I just have a printer added to it?

This is not necessarily the reason: Generally, our printers cannot be used. There are several reasons for this. Look at what kind of one it is.

1: First make sure that the printer is installed normally and whether the data cable connection is loose.

2: Set the printer you want to print as the default printer;

3: From Start - Settings - Printers & Fax - Open the Printer option.

The printer has no option to pause printing; If there is a removal of this option;

4: There is remote document printing, due to the lack of paper or something, it does not come out in time, resulting in a backlog of documents. Generally, turn off the printer, go from Start - Settings - Printer Fax Machine - Open Printer Options, select the document and right-click to cancel.

Just print it again;

5: There is a problem with the driver installation: Device Manager - Universal Serial Bus Controller - Printer Options (different printers should be different).

Just delete him and reinstall the driver.

6: Wrong port selection: From Start - Settings - Printer Fax Machine, right-click on the Printer - Properties - Port tab to see if the settings are correct.

By following these six steps, you will basically be able to solve the problem of "error - printing".

1. Click the Start menu and select the device and printer options. In the window that opens, you can see all the devices and printers on your local computer. That's where the printer is set up.

2. Find the printer icon, the red circle in the picture below. Double-click on the printer icon and we can see the small window that pops up. There are a variety of settings that can be made on it.

3. The working status of the printer displayed on the title is offline use of the printer, we need to modify it and change it to use it online.

4. Click the printer menu to open the drop-down list, click once before using the printer option offline, and remove the checkbox.

5. In this way, the computer will enter the working state of using the printer online.

6. Check that the text on the title of offline printer is gone. Now restart printing and everything works fine.

Select "My Computer" on the desktop, right-click and select "Manage". In the "Administration" window, select the "Services" option under the "Services and Applications" extension item, find the "printspooler" service in the list of system services that appears on the right, and double-click to enter "print".

spooler" service settings, in the "print

spooler" service settings window, set the "Startup Type" to "Automatic", and click the "Start" button; At this point, the system will attempt to start the service;

The printer you add will have a drive CD, you put the disc into your computer's CD-ROM drive, open it and run it. Note that as long as the computer and printer cable are removed, the printer needs to be re-added.

I bought a printer with a CD-ROM.

Delete the original driver and install it on the CD.

Then set one as the main and the other as the shared, and generally the printer with the optical drive is the host.

Share is a slave, and slave printing must be turned on by the host.

Purely manual play. Give points.

Reset the printer line and try to reprint the file.

<> "Precautions. Before adding a printer, we need to know which model of printer we want to add, rock silver and install the driver of the corresponding model. Town jujube round.

Summary. As far as the description is concerned, it is recommended to be specific. If you are referring to a shared printer. Then it is caused by not saving the other party's address and password.

You can add it manually in the User Account Credential Manager.

The printer has to be re-added every time to be used, and it always doesn't work, what's going on.

As far as the description is concerned, it is recommended to be specific. If you refer to a co-state slip-on printer. Then it is caused by not saving the other party's auspicious traces including the address password. You can add it manually in the Credential Manager of your account.

Wireless printers, you need to re-add the printer each time to use it.

It wasn't like this before.

Both the printer and the laptop are connected to my phone hotspot.

Now every time it shows offline, you need to re-add the printer to print.

Note. You can only ask 6 times at once.

Don't let me type halfway and suddenly the consultation is over.

You're 5 times now, see what I'm done first.

I just want to know the hidden way to solve the problem of Chalu, in the past, as long as the notebook and the stove cracking machine were connected to the mobile phone hotspot at the same time, you can print, why can't you now? I've tried to change the methods I commonly use on the search, but it's useless.

First of all, Pai Huai and you both have mobile phones, and the mobile phone assigns you an address. It will not be recognized, because the address has changed, and the envy is set in the hotspot of your mobile phone, and the IP is fixed, and it will not change the luck after it is added.

Secondly, the computer will not recognize the printer because the IP of the bridge stupid printing machine has changed, and the computer of Minshan Computer has also changed If these two can be set to fixed in the hotspot management, then the connection will not be in the future. In the past, it would not be because of luck, and it would not be automatically assigned to the same address as the previous model.

So it's normal that it will be like this. It is recommended to try the IP fixing I said first.

The printer I bought has a CD, delete the original driver, install it on the CD, and then set one as the main, the other is shared, and the printers with optical drives are generally hosts. Share as a slave, slave printing must be turned on by the host to give points purely manually.

Reset the printer line and try to reprint the file.

Whether the printer is connected directly to your computer or via sharing, if it is shared, then it is not a printer issue.

See if there is any offline printing or pause printing.

If it's wrong, I usually restart the printer driver.