Omega is going fast, what is the situation and where can I go to deal with it?

You can go to the repair shop and ask the master to use the watch to check the accuracy of the watch. Guangzhou Standard Watch Company.

For the handling of mechanical watches, demagnetization is the first priority, and it must be neat and thorough demagnetization; Then check the position error of the watch, continue to check the hairspring, clean the hairspring with alcohol, it will be more fuel and tidy, volatile is good, and the low-quality fuel and magnetic field will make the hairspring show up to circle or attract each other. It is best to do a timekeeping quiz on the repaired watch, and it is best to do a long-term dynamic check to see which all-round rotating experimental rack is to be put on, or to wear it directly to check carefully. If it is a deeply hidden problem, we can only detect it with the help of relevant instruments.

Mechanical watch: 30 +45 seconds error per 24 hours for superior products; First-class products have an error of 40 +75 seconds every 24 hours; The error of the good product is 60 +105 seconds every 24 hours.

Quartz watch: excellent product error 0 5 +0 5 seconds per 24 hours; First-class error every 24 hours 1 0 + 1 0 seconds; The error of the qualified product is 1 5 + 1 5 seconds every 24 hours.

There are three reasons for inaccurate time:

First, the power is insufficient.

The power required by the watch is not the same, like the Sturing automatic mechanical watch, it relies on the shaking of daily wear to store power, if you do not wear it for a long time, there is no power, then the watch will definitely stop or slow down. The manual one needs to be wounded up and down from time to time, and some rely on electronics to maintain rotation, so if the watch is inaccurate recently, it is likely that the electronics are out of power and need to be replaced.

2. External interference.

This is whether you pay attention to it when you wear it daily, for example, watches are relatively squeamish, waterproof, anti-magnetic, and shock-proof, if you don't do a good job, it is normal for the watch to be inaccurate. If you wear a watch that cannot be worn for strenuous exercise, and you wear it to play golf or badminton, the strong vibration may cause damage to the parts inside the watch, and the watch will not be accurate.

In addition, it is a cliché that watches are afraid of magnetism, if your job is to engage in some research things and need to be in frequent contact with large electronic devices, then try not to wear a watch, because the magnetic field existing around it will disturb the normal walking of the watch. Some people say that the watch is bought to wear, and the baby is not good every day, so why buy it? That's true, but you should also be careful when wearing it.

3. Proper maintenance.

The watch is more precise, there are more small parts, and the mutual fit between the parts can operate normally, so the haul is indispensable for friction, so the watch is oiled, and it will inevitably dry up after a long time, plus there may be some impurities into the watch, so it will cause the watch to go inaccurate, at this time you have to go to maintain it, clean up the watch.

The speed of a mechanical watch is mainly determined by the pendulum frequency, usually the larger the pendulum amplitude, the smaller the pendulum frequency, and the smaller the pendulum amplitude, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

The structure of the watch itself, due to the gravitational force of the earth, the offset of the horizontal position and the vertical position of the watch will produce a displacement, the mainspring from the top to the relaxation, the torque is unbalanced, and in addition to the influence of external temperature, magnetic field, vibration, etc., even if the mechanical watch increases some frequency, it is impossible to achieve the accuracy of quartz electronic watches.

The watch is affected by the magnetic field, after the hairspring of the watch is magnetized, the circle between the circles is only shown when wearing, there is a sticky or short loop, especially on the façade, the hairspring will hang down due to its own gravity, the shaking of the arm will intensify its radial movement, and the magnetic utility is shown because of this.

The balance of the balance wheel and the balance spring, especially the balance wheel, the balance wheel is very poor, which will cause the balance wheel to highlight the surface precision change under a certain swing.

1.The watch handle is pulled out of the second gear, which is to adjust the time.

2.Do not adjust the time and its functions between 23:00 p.m. and 5:00 a.m. to avoid damaging the Omega watch mechanism.

3. The watch is wound up when the watch rotates upwards without pulling it out, and the new Omega watch or long-standing watch recommends winding about 30 times, which can reserve some power for the watch, so as to avoid pauses or inaccurate timing caused by insufficient activity.

4 .The watch handle is pulled out of a gear, is to adjust the date, 1-31 days, if there is only 30 days of the month, you have to manually adjust the 31st. (Note that the calendar is adjusted at 12 o'clock in the evening, if the calendar is adjusted during the day, you can manually rotate the time by 12 hours).

Care of the watch:

1. When wearing a watch, the sweat on the hands is corrosive to the case, the all-steel case is nickel-chromium alloy, the corrosion resistance is better, the semi-steel case is copper, long-term contact with sweat, easy to corrode, should often wipe off the sweat with a soft cloth or pad the plastic watch holder to prevent it from being eroded by sweat.

2. Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.

3. Do not put the watch in the wardrobe with mothballs to avoid the deterioration of the watch oil.

4. Do not put the watch on the radio or TV to avoid magnetization.

5. Watches that are not worn for a long time should be wound regularly once a month so that the parts will not be in a static state for a long time, so as to ensure the operation performance of the watch machine. Any watch will have errors, even Omega is no exception, so when you encounter an error in your watch, don't rush to repair it, this is normal, just adjust it.

Common reasons for watch time error and watch time inaccuracy:

1. Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise is very small, the power reserve may be insufficient, you can supplement the power by manual winding, and then observe whether there is a phenomenon of fast and slow.

2. Hit or impacted: The watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause time problems.

3. Need for maintenance: The lack of oil in the movement or the wear and aging of the internal parts may cause the problem of running time, which needs to be maintained and sent to the designated maintenance point for maintenance services.

It is normal for a mechanical watch to go faster for dozens of seconds a day, but the brand you said will go so much more in a month at most, and it is recommended to take it to the maintenance point for inspection or direct replacement.

Take the invoice to return and exchange the licensed goods, and wear a goods to play.

The watch maintenance center is located in Room 3705, 37th Floor, Block 2, Ganghui Hang Lung Plaza, No. 3 Hongqiao Road, Xuhui District, Shanghai 021-80184441

The mechanical watch goes fast first because the position error of the watch is relatively large, for example, the precision of the hand surface and the face is different, the error of the façade luck is relatively large, when worn, its comprehensive uniform daily error is relatively increased, the position error is a key indicator of the performance of the watch, and the general change index should be as small as possible.

There is also a common problem with the fast movement of mechanical watches, that is, the secondary outer ring of the hairspring rubs against the outer pile of the hairspring, which is also displayed on the façade and dynamics, especially if the watch has been touched before, and the hairspring is most likely to be in trouble after deformation; This sub-position, depending on what kind of movement, if it is a general ETA men's watch movement, it is easier to display the left or upper position of the watch on the wrist, this situation requires the adjustment of the gap between the secondary outer ring of the hairspring and the outer pile of the hairspring, and there should be a reasonable and safe distance between them.

If you have any questions, please feel free to send me a private message.

There are four reasons why mechanical watches are moving faster:

1. The lubricating oil of the mechanical watch penetrates into the hairspring, or leaks, or overflows, so that the extremely precise hairspring is "sticked" together, shortening the length of the hairspring, which leads to the speed of the balance wheel of the watch to accelerate, resulting in time "running fast", this situation needs to be sent to the repair shop to the professional master to deal with, so that the hairspring can return to normal.

2. It is still a hairspring, and the hairspring is hung on the outer pile of the hairspring. Due to vibration and other reasons, the hairspring was instantly "deformed", "rubbed" on the outer pile of the hairspring and hung on it. This is the same reason as the "sticky" oil of the hairspring, which leads to the "running fast" of time.

This kind of harm is greater, and it needs to be repaired in time, and the hairspring can be "picked" away from the outer pile of the hairspring.

3. The hairspring is magnetized, and the time "runs fast" due to the contact magnetic field, and the watch can be put into the demagnetizer to demagnetize.

4. The fork pad of the escape wheel is faulty, and the kinetic energy release speed of the escape wheel cannot be effectively controlled. As a result, time "runs fast". I had to swap it out. It also needs to be sent to a professional watch store for repair.

There are two situations in which the watch is not allowed.

If it's just a little fast, for example, it's only more than ten or twenty seconds a day, then the gossamer circle is a little shorter, and this situation is okay.

If you know a little bit about the watch, you can adjust it yourself, if you don't understand, you have to find a watch repairer.

Hello, there may be the following reasons why Omega does not go after the adjustment time:1Battery drained:

If the watch battery is depleted, then the watch will not work properly, and it will not be able to keep time. It is recommended to replace the battery. 2.

Movement failure: If the watch movement is faulty, then the watch will not work properly. It is recommended to send the watch to a professional repair point for overhaul.

3.Incorrect time adjustment: If the time is adjusted incorrectly, then the watch will not be able to keep time properly.

It is recommended to check again whether the time adjustment is correct. 4.Watch Downtime:

If the watch is stopped, then the watch will not be able to run properly. It is recommended to take your watch to a professional repair center for service. In short, if your Omega watch is not running out of time, it is recommended that you check whether the battery is drained first, and then check whether the time adjustment is correct.

If the above two reasons are not a problem, then it is recommended that Fanzhi send the watch to a professional repair point for maintenance.

The slowness of the watch may be due to long-term contact with electronic devices that are magnetized and need to be demagnetized by a watch repair shop. Or it is a long-term storage of kinetic energy (normal wearing for one day can store two days of kinetic energy, and insufficient kinetic energy can also be manually wound to fill the mainspring.) When the automatic watch is at room temperature, the error of 45 seconds in 24 hours is normal.

Since automatic watches are self-winding by the swing of the arm, they must be worn for more than eight hours a day to ensure accurate timekeeping. If none of the above methods work, you should go to a professional watch repair center for testing. In this way, it can accurately guide the reason for the slow running of the watch and repair it effectively.

One. Watch magnetization: The watch is in too much contact with items with magnetic fields, which leads to the phenomenon of magnetization of the watch, causing the watch to be inaccurate.

After being magnetized, the watch may stop, slow, or fast. After the watch is magnetized, its magnetism will not recede on its own, and it needs to be demagnetized and repaired to return to normal.

2.Lack of maintenance: If the watch lacks maintenance, it will lead to wear and tear of parts, dry up the sludge, affect the normal running time of the watch, and make the watch appear fast and slow.

3.Mechanical failures: Mechanical failures such as watch balance spring failures, escapement failures, and component slips can cause the watch to be fast and slow.

Mechanical watches are sometimes fast and sometimes slow, and it may be caused by severe impacts, water ingress, etc. Quartz watches are generally very accurate and less prone to time failures. In the case of adequate maintenance, it is more likely to be fast and slow, which is more related to the failure of the circuit board, or the poor contact of a certain part.

Your Omega watch is out of time, it may be too long, there is Uni, you should wipe the sludge and warrant it.

You can go to the after-sales service station of the watch to test and process.

How to take care of your watch:

1. It is best to place desiccant in the place where the watch is placed, but avoid using chemicals such as mothballs and insect repellents.

2. The leather hand watch should avoid contact with water as much as possible, so as not to harden and stink the strap, which will lead to breakage.

3. If there is any abnormality in the watch, it should be sent to the nearest watch store for inspection immediately.

4. The automatic watch must be worn for more than 8 hours a day under the condition that the amount of activity is sufficient.

The watch is not allowed to run inaccurately:

1.Lack of power, mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of exercise, and can be directly manually wound to supplement power.

2.There is no maintenance, mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear will produce iron filings for a long time, increasing the friction between the gears, this kind of problem only needs to clean the movement and re-refuel.

3.By impact, the mechanical watch has a complex structure, which is composed of hundreds of precision parts, which is very fragile, and the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop. According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

The watch should be maintained every 1 to 4 years, replacing the waterproof components, checking the function of the time and the power consumption of the movement, cleaning the movement and maintaining the appearance. This kind of maintenance will effectively extend the service life of your mechanical watch.