-
In fact, it is a common thing for dust to enter the watch dial, which is not very strange, after all, in this environment of life, dust is everywhere. If dust enters the dial of a watch, there are usually two situations to solve:
1.It's dust before it leaves the factory;
2.The watch is not well closed, and usually water enters when it enters the dust. The ash on the dial does not come from the outside world, but is caused by internal wear.
3.It is the dust that enters during use. Of course, the factory inspection of regular brand-name watches is very strict, and the probability of this phenomenon is very rare. And, when we buy, we also double-check.
Therefore, dust entering the dial of a watch is usually due to gradual infiltration during prolonged wear. If only fine dust is entered, there is no need to clean it without affecting the appearance and use. However, if it is a certain length of dust such as hair or acrylic fibers that enters the dial of the watch, it is necessary to pay attention, because this dust is very likely to cause the movement to stop.
After finding that the watch is dusty, do not easily open the back cover for cleaning, and send it to a professional place such as after-sales service for cleaning in time, and do a waterproof test regularly.
-
After finding that the watch is dusty, you must not open the back cover for cleaning without professional guidance, you should find the help of professionals in time or send it to a professional repair shop for cleaning, and regularly do waterproof tests and timekeeping accuracy tests to ensure its normal operation.
At the same time, we should also pay attention to our daily life and avoid contact with chemicals. And everyone should know the common sense that the waterproof watch is not cold water and not hot water, so you must not take the watch to take a bath, to avoid water vapor, to prevent the waterproof function from becoming worse after entering the water, and then after adjusting the watch, remember to restore the watch head and press it tightly to avoid dust entering.
-
It is recommended to find a formal service center for inspection and maintenance.
-
If dust enters the dial of the watch, it is usually divided into two situations to solve: 1. It enters the dust before leaving the factory; 2. The watch is not well closed, and usually water enters when it enters the ash. The ash on the dial does not come from the outside world, but is caused by internal wear.
3. It is the dust that enters during use.
-
Maintenance common sense. 1) When wearing a watch, the sweat on your hands is corrosive to the case, the all-steel case has better corrosion resistance because it is nickel-chromium alloy, and the semi-steel case is copper, long-term.
In contact with sweat, it is easy to corrode, so you should often wipe off the sweat with a soft cloth or put on a plastic table holder to prevent it from being eroded by sweat.
2) Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.
3) Do not put the watch in a closet with mothballs to avoid the deterioration of the watch oil.
4) Do not put the watch on the radio or TV to avoid magnetization.
5) Watches that are not worn for a long time should be wound regularly once a month so that the parts will not be in a stationary state for a long time, so as to ensure the operation performance of the watch machine.
-
Watch anti-dust protection and ash handling methods.
1.If the watch only gets into fine dust, we don't need to clean it up without affecting the beauty and use of the watch. However, if it is hair or acrylic fibers and other dust of a certain length that enters the watch dial, it needs to attract our attention, because such dust is very likely to affect the operation of the watch movement or even damage the movement.
2.When we find that the watch is dusty, do not easily open the back cover of the watch for cleaning, and send it to the maintenance and after-sales center for cleaning in time, and regularly do waterproof tests and timekeeping accuracy tests to ensure its normal operation.
-
The Service Center provides services for customization, cleaning, maintenance, appraisal, refurbishment, fault repair, replacement of damaged exterior parts and replacement of straps for Panerai watches. Our technicians have undergone strict professional skills training and provide two years of after-sales guarantee services. The service center is guided by the watch manufacturer on the spot**, **transparent, no hidden consumption, no additional charges.
-
1) Please properly keep the proof of purchase, warranty card and other documents, do not open the case and battery back cover by yourself, in order to get effective and perfect after-sales service, if the maintenance certificate is cut or deleted, the company reserves the right to refuse to provide warranty service.
2) According to the product use and maintenance instructions in the package, the warranty period does not include any normal wear and tear due to the appearance of the belt and watch.
3) The watch is exposed to extremely high or low temperatures, bathing (sauna), and the crown is not locked, etc., which can easily cause moisture to penetrate into the watch or even enter the liquid, and improper operation is not covered by the product warranty.
4) If the product is opened or modified at an unauthorized repair point, the product failure is not covered by this warranty.
5) For the repair or replacement carried out in the authorized maintenance unit of the product, the parts under the repair and replacement shall be owned by the authorized unit.
-
In general, the watch will not easily malfunction, and most of the malfunction problems are due to the improper use of the watch. Many people know very little about watch maintenance, so they do not do a good job of watch maintenance, which often leads to watch failure.
So, how do you avoid malfunction on your watch? Let's talk about it briefly.
1. During the wearing of the watch, it is inevitable that the sweat on the hands will corrode the case, so it is recommended that you often wipe off the sweat with a soft cloth or put on a plastic watch holder to prevent it from being eroded by sweat and affecting the appearance.
2. For watches with leather straps, leather will absorb moisture, in order to avoid corrosion, watch leather straps should try to avoid contact with high humidity, water-based or oily substances and cosmetics.
3. Watches and jewelry should be stored separately to avoid wear and tear between them.
Fourth, the watch should also avoid strong impact, but also try to prevent the temperature difference in the environment is too large, even if the watch is waterproof, please do not operate the watch function in water.
5. For watches that are not worn often, they should be stored in a box away from the magnetic field, and the watch should be wound at least once a month to ensure the normal operation of the movement to avoid the lubricating oil drying up.
Therefore, for a famous watch, the quality of maintenance will have a direct impact on its value.
-
Panerai after-sales repair points are as follows:1. Nanjing ** shopping mall watch maintenance center.
The address is at No. 79, Zhongshan South Road, Nanjing.
2. Xinyu Nanjing Xinjiekou Department Store Watch Repair Center.
The address is at No. 3, Zhongshan South Road, Nanjing.
3. Yijia and clocks.
The address is F1, New City Plaza, No. 99, Caochangmen Street, Gulou District, Nanjing.
4. Guangcheng watch maintenance.
The address is at Yuhua Parlor Shopping Center, No. 109, Software Avenue, Tiexinqiao Street, Yuhuatai District, Nanjing, F4eparkF1.
5. Sheng clock maintenance.
The address is F1, No. 79, Zhongshan South Road, Qinhuai District, Nanjing.
-
Panerai watch after-sales maintenance points: Guangzhou Panerai after-sales service center (Wanling Hui store), Shenzhen Panerai after-sales service center (Shennan East Road store), Shanghai Panerai after-sales service center (Ganghui store), Shanghai Panerai after-sales service center (Hongyi store), Shanghai Panerai after-sales service center (Huai Gai Zhenghai store).
1. Guangzhou Panerai after-sales service center (Wanling Hui store).
2. Shenzhen Panerai after-sales service center (Shennan East Road store).
3. Shanghai Panerai after-sales service center (Ganghui store).
4. Shanghai Panerai after-sales service center (Hongyi store).
5. Shanghai Panerai after-sales service center (Huaihai store).
-
Panerai watch after-sales service**400-697-7501.
The Panerai Watch Service is designed to provide a technical diagnosis at any time of the time when you need a check-up at one of our designated service centers. The watchmaker thoroughly inspects each part, testing the timekeeping, every function and water resistance. Based on the condition of the watch, its historical usage and your requirements, we will make a detailed cost estimate.
Each Paneraseafood product has an individual identification number to prove its authenticity.
The Panerai Premium Guarantee extends the validity of your warranty up to 8 years. Precision technology, stable and reliable. Panerai is at your side, ready to help you solve your problems.
Panerai watch care recommendations:
After swimming in seawater (salt water), always wash your watch with warm running water. In order to protect the leather strap, it is recommended to avoid contact with water or exposure to moisture, prolonged exposure to strong sunlight, cosmetics and oily substances. Protect your watch from shocks and shocks (golf or tennis, mountain biking, etc.).
Impacts not only damage the external parts, but also affect the precision of the movement. Before using your watch in water, make sure that all moving parts are in their marked position (closed).
-
Each Panerai official after-sales customer service center has an elegant and comfortable environment, and is equipped with professional service personnel to provide humanized and warm quality service for each visiting customer. In the event of a time failure or damage to the machine-buried roller parts of your Panerai watch, please go to the official Panerai after-sales service center for basic maintenance. We strictly abide by the brand's unified charging standards, and the cost of maintenance and accessories is transparent.
Panerai brand introduction
The Panerai brand was founded in 1860 by Giovanni Panerai. In that year, Giovanni Panerai established a watch workshop in Florence, Italy, producing clocks and precision instruments. The products produced at the Panerai factory have the professional function of measuring time and space, and are of excellent quality and have extraordinary safety standards.
By the end of the 19th century, Panerai had become the appointed supplier to the Italian Navy. In 1910, Panerai developed a luminous substance, which was used in instrument dials, sights and other devices.
This technology has been patented in Italy and a number of other countries. During the First World War, the Italian Navy used guns such as luminous devices, chronographs, depth gauges, compasses, and timers for underwater priming and detonating devices, all of which were produced in Panerai's factories. In 1938, Panerai produced the Radiomir for the Italian Navy that could withstand the harshest conditions.
-
The address of Panerai after-sales maintenance is: No. 373 Caoxi Road, Xuhui District, Shanghai, 1st Floor, Gengzhuang Building, No. 10A, Zhongguancun South Street, Haidian District, Beijing, 28B, Block A, R&F Yingfeng Plaza, No. 121 Tianfu Road, Tianhe District, Guangzhou, Block C, 15th Floor, Polymer Technology Building, No. 3 Yinjiang Road, Jinjiang District, and 3rd Floor, Hongfa Building, No. 2028, Huaqiang North Road, Futian District, Shenzhen.
1. No. 373, Caoxi Road, Xuhui District, Shanghai.
Located at No. 373 Caoxi Road, Xuhui District, Shanghai, Panerai Shanghai Service Center is a professional after-sales service center set up by Panerai in China. Here, customers can enjoy after-sales service with professional technology, including watch maintenance and repair.
2. 1st Floor, Gengzhuang Building, No. 10, Zhongguancun South Street, Haidian District, Beijing.
Panerai Beijing Maintenance Center is located on the 1st floor of Gengzhuang Building, No. 10, Zhuling Village South Street, Zhongguan, Haidian District, Beijing, about 500 meters away from Exit C of Zhongguancun Station of Metro Line 4. The centre is equipped with some of the highest level of repair equipment for the professional maintenance and repair of Panerai watches.
3. 28B, Block A, R&F Yingfeng Plaza, No. 121 Tianfu Road, Tianhe District, Guangzhou
Panerai Guangzhou Maintenance Center is located at 28B, Block A, R&F Yingfeng Plaza, No. 121 Tianfu Road, Tianhe District, Guangzhou, about kilometers away from Tiyu West Station of Metro Line 3. Repair Center Hill is equipped with first-class equipment and technicians to provide customers with high-quality services in the maintenance and repair of watches.
4. Block C, 15th Floor, Polymer Science and Technology Building, No. 3 Yinjiang Road, Jinjiang District.
Panerai Chengdu Maintenance Center is located in Block C, 15th Floor, Polymer Technology Building, No. 3 Yinjiang Road, Jinjiang District, about 500 meters west from the exit of Dongmen Bridge Station of Metro Line 2. The repair center provides a full process of watch repair services from engineering testing to final inspection, bringing customers a satisfactory after-sales experience.
5. 3rd Floor, Hongfa Building, No. 2028, Huaqiang North Road, Futian District, Shenzhen.
Panerai Shenzhen Maintenance Center is located on the 3rd floor of Hongfa Building, No. 2028 Huaqiang North Road, Futian District, Shenzhen. With more than 100 high-level technical personnel and supporting equipment, we can provide customers with all aspects of after-sales service, including maintenance and repair.
The above content refers to Encyclopedia - Panerai.
-
Chengdu Panerai service after-sales service point: located in Chunxi Road, Jinjiang District, Chengdu City, Sichuan Province. Beijing Panerai watch after-sales service point:
It is located in Wangfujing Oriental Guangbi Naichang, No. 1 East Chang'an Street, Dongcheng District, Beijing.
With design inspired by the sea, Panerai has positioned the brand as a high-end watch in the world of sports and leisure. The Italian design style and Swiss know-how make each Panerai watch a distinctive brand style and excellent quality.
For decades, Panerai has served as a merchant of the Italian and Italian navies, and has provided professional high-precision instruments especially for divers. Panerai watches, including the Luminor and Radiomir, were long considered a military secret until 1997, when the Panerai brand was acquired by Richemont and introduced to the public on the international market.
Drawing on the design and history of Italy, the Panerai brand's movements and craftsmanship are developed at its Manufacture in Neuchâtel.
Care precautions for Panerai watches:
1. When repairing a Panerai watch, all parts of the Panerai watch should be separated, the movement should be scrubbed with gasoline, then the other instruments in the watch should be cleaned with professional equipment, and finally oiled and assembled. In addition to the parts in a Panerai watch, the case in a Panerai watch should also be polished while cleaning the watch.
2. Because the watch has high requirements for technical parameters, cleaning the watch is a very precise job, and professional cleaning generally takes 5 days to complete. However, an old watch can often be turned into a new 80's after such a messy professional wash.
3. For mechanical watches that have not been worn for a long time, the movement parts should also be replaced regularly. As for quartz watches, their battery life is generally 1-2 years, and the battery should be replaced regularly. When replacing the battery, the sealing ring introduced by the Panerai watch should also be replaced and the water-resistance test should be carried out.
4. The function of replacing the battery of the watch will replace the battery within 3 weeks after the prompt appears. The hardness of the raw material of the watch case and strap is the same in all parts. When worn, it should be washed regularly to maintain its outstanding decorative properties.
5. Seawater, salt water baths, perfumes, shampoos, nail polishes, nail polish removers and other cosmetics containing acid and alkali chemicals will definitely corrode the gold plating and metal surfaces introduced by Panerai watches, so contact should be prevented. Even if Panerai watches introduce a water-resistant function, it will not prevent all kinds of water accumulation.
Please note that watches are usually in operation 24 hours a day, seven days a week. The frequency of maintenance of a watch depends on the type of watch, the climate and the condition of the wearer. >>>More
For mechanical watches that are not worn for a long time, they should also be wound regularly to allow the mechanism to rotate. As for quartz watches, their battery life is generally 1 to 2 years, and the battery should be replaced regularly, and the sealing ring of the watch should be replaced when the battery is replaced, and it should be tested for water resistance. For watches with a battery replacement prompt, the battery should be replaced within 3 weeks of the prompt. >>>More
1. Method 1: When the watch is fogged, you can use several layers of toilet paper or flannel cloth that is easy to absorb moisture to wrap the watch tightly, put it at about 15 cm near a 40-watt light bulb, and bake it for about 30 minutes. Note: Do not bake the watch glass close to the fire to avoid deformation of the watch glass. >>>More
Specifically, it depends on what is wrong with your watch. It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.
In fact, it is a common thing for dust to enter the watch dial, which is not very strange, after all, in this environment of life, dust is everywhere. Dust that enters the dial of a watch is usually due to gradual penetration during prolonged wear. If only fine dust is entered, there is no need to clean it without affecting the appearance and use. >>>More