What is the reason for the slow running time of Glash tte watches?

The following is an introduction to the five common reasons for the inaccuracy of the watch time

1: Insufficient power reserve: You need to check whether the power is sufficient, if the amount of exercise is small, the power reserve may be insufficient, you can supplement the power by manual winding, and then observe whether it continues to have the phenomenon of fast and slow.

2: Insufficient power: If the quartz watch suddenly finds that it is slowing, it is likely to be caused by insufficient battery energy, and you can send the watch to a special maintenance point to check the power.

3: The watch has been hit or impacted: the watch is very tight, if it is hit or hit, it may cause loose damage to the internal parts, and it may also cause the problem of running time. This is to be dealt with in a timely manner.

4: Need maintenance: The lack of oil in the movement or the wear and aging of the internal parts may cause the problem of running time, which needs to be maintained, and needs to be sent to the designated maintenance point for maintenance services.

5: In addition to the above common situations, some ambient temperatures affect the watch by magnetism: if the balance spring of the watch is magnetized, the watch will not be accurate.

There are two situations in which the watch is not allowed.

If it's just a little fast, for example, it's only more than ten or twenty seconds a day, then the gossamer circle is a little shorter, and this situation is okay.

If you know a little bit about the watch, you can adjust it yourself, if you don't understand, you have to find a watch repairer.

The reason for the mechanical watch to stop.

1.Insufficient power: mechanical watches are divided into manual mechanical watches and automatic mechanical watches, insufficient power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of movement, and it can be directly manually wound to supplement the power.

2.No maintenance: mechanical watches are generally maintained once every 2 to 3 years, the watch is used for a long time, the lubricating oil in the movement will dry up, and the friction of each gear for a long time will produce iron filings, increase the friction between the gears, this kind of problem only needs to clean the movement, re-refueling.

3.Shock: A mechanical watch has a complex structure and is composed of hundreds of precision parts, which is very fragile, and the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop.

According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it on time, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

Glashütte Watch Care Center: 400-659-0877

If the needle is wound, unplugged, rotated, etc., the speed of deterioration of the seal can easily be accelerated. Generally speaking, the smaller the head of the watch, the worse it will be to operate, especially when winding, which can sometimes be inconvenient. But stainless steel and relatively large watch handles are good in terms of use and longevity.

In order to ensure and extend the sealing and waterproof performance of the watch handle, some hand watches add a steel wire hoop to the outside of the O-ring inside the watch handle.

Mechanical watch The oil inside the movement is dry or there is a problem with the movement Quartz watch The battery is low The battery is dead The internal problem of the movement should be sent to the service center for testing The address in Chengdu is in Room 05, 24th Floor, Sichuan Aviation Plaza.

1. Lack of power:

Mechanical watches are divided into manual mechanical watches and automatic mechanical watches, lack of power is an important reason for the watch to slow down or stop the watch, manual mechanical watches can be wound directly when slow, and the reason why automatic mechanical watches are slow is mostly because of insufficient wearing time or the arm does not maintain a normal amount of exercise, which can be directly manually wound to supplement the power.

2. No maintenance:

Mechanical watches are generally maintained once every 2 to 3 years, and the lubricating oil in the movement will dry up after a long time, and the friction of each gear will produce iron filings for a long time, increasing the friction between the gears.

3. Impact:

Mechanical watches have a complex structure and are composed of hundreds of precision parts, which are very fragile, and the watch is subjected to a strong impact, and the parts in the movement may loosen and cause the watch to slow down or stop. According to the reason why the watch is slow, you can take corresponding measures, pay attention to the winding of the manual machinery, maintain the normal amount of exercise of the automatic mechanical arm, maintain it when pressing ZD, pay attention to the watch waterproof, shockproof and anti-magnetic, and send it for repair in time if there is a problem.

The reason why the watch is not running accurately.

1. External influences: It is a variety of influences from outside the clock, depending on the working environment of the clock.

2. Fast and slow needle: fast and slow needle is an economic structure that is convenient for time calibration, but theory and practice have confirmed that it will affect the isochronism of the system, and may also produce a bit difference, and these timing errors are relatively random and cannot be compensated or offset.

3. Friction: Friction usually has positive and negative effects, and it has a positive aspect, such as friction wheel, friction between the automatic watch spring and the barrel, screw self-locking, etc.; On the other hand, friction can lead to a decrease in transmission efficiency and wear of parts, which can affect timing.

4. Escapement: The influence of the escapement is mainly the impact on the balance spring system in the process of energy transfer, and the balance spring system can only maintain a fixed frequency in the case of freedom, obviously, the energy transfer process of the escapement will affect the frequency. The theory suggests that this effect decreases as the transfer process approaches the equilibrium point of the balance.

5. Influence of temperature: The influence of temperature is mainly manifested in two aspects: first, the temperature change will change the working length of the hairspring, and at the same time change the inertia of the balance wheel, which can directly affect the timing accuracy; Secondly, the temperature change will affect the viscosity of the lubricating oil, affect the transmission efficiency, and thus affect the timing.

6. Magnetic field: the hairspring with the greatest influence of the magnetic field can change its elastic modulus, and also deform the hairspring under the action of the magnetic field, resulting in additional stress.

7. Balance spring: The center of gravity of the general swing frame hairspring changes with the change of the swing angle of the balance wheel, and it will produce position error under the action of gravity.

8. Balance wheel balance: The balance of the balance wheel element directly affects the bit difference, and the static balance of the balance wheel element is a basic requirement.

If the watch is not washed for a long time, the movement parts lack oil, the friction increases, and the wear and tear of the movement will naturally increase, so it may lead to inaccurate timekeeping.

If you find that your watch is going faster or slower, you can find a compass to diagnose whether the watch is magnetized. Place the compass flat on the table, hold the watch at close range and quickly shake it back and forth above the compass, and try the watch in a few directions a few more times, as long as the pointer moves, especially if the deflection is very strong, you can judge that the watch is magnetized. The watch is magnetized and it is best to take it to this repair center for demagnetization.

Usually take care of the watch, do not let the watch come into contact with items with strong magnetic fields, and it is best to keep a distance of more than one meter. Do not leave your watch next to TV, computer, radio, mobile phone, mahjong table, refrigerator, washing machine, speaker, car door, or leather bag magnetic buckle.

Another reason is that summer is coming, and the hot weather will go faster than the cold weather. Yes, there are two laws of physics here. One is the thermal expansion and contraction, the weather is hot, the hairspring will be a little elongated, this everyone wants to get, therefore, the lengthened hairspring, the swing will also increase, and the watch will slow down; On the contrary, when the weather is cold, the watch will go faster.

The reason why the watch is not running accurately.

1. Insufficient power reserve. If the amount of exercise is small, it may also cause a lack of power reserve, so you can replenish the power by winding it manually, and then observe whether it continues to be fast or slow.

2. The watch has been hit or impacted, which may cause loose damage to the internal parts and may also cause the problem of running time.

3. The lack of oil in the movement or the wear and aging of the internal parts may cause the problem of running time, which needs to be maintained.

4. The watch is magnetized: If the hairspring of the watch is magnetized, the watch will not be accurate. The influence of the wearer's usage habits may cause an increase in the time error. Sending the watch to a repair center for inspection and adjustment will restore the watch to its normal tolerance.

1. The timing accuracy of the mechanical watch is determined by the oscillation system, when the number of vibrations per unit time of the balance wheel in the oscillation system increases, then the mechanical watch will go faster. The oscillation frequency of the balance wheel is controlled by the hairspring, and when the watch goes faster, we can adjust the hairspring that can be retracted and released to make it longer.

2. The magnetization of the watch will also cause the phenomenon that the mechanical watch will become faster, and there are many steel wheels of different sizes inside the mechanical watch, and these parts are very easy to be magnetized, and the hairspring is also relatively easy to be magnetized. When the hairspring is more magnetic, it will make the hairspring ring sticky, lap and other phenomena, which may cause the watch to be two or three hours faster.

3. Under normal circumstances, the balance of the balance wheel and balance spring of the movement with poor quality is generally not very stable, especially when the balance wheel balance is very bad, it will cause the balance wheel to highlight the superficial precision change under a certain swing, which will cause the watch to go faster.

4. Due to the structure of the mechanical watch, it is impossible to have no error. Even if the vibration frequency of a mechanical watch is increased, it will still be affected by the gravitational pull of the earth, and the error of the watch will be different in the vertical or horizontal plane. In the case of tightness, the mainspring will also have different errors.

Therefore, as long as the mechanical watch does not exceed the error range, it is also a normal phenomenon.

5. Generally speaking, mechanical watches go fast, many times it is caused by our improper use, when we wear the watch to do sports, the high-frequency vibration will also increase the error of the watch, resulting in the watch going fast. When we stand still, the watch's accuracy returns to normal.

1. The speed of the mechanical watch is mainly determined by the pendulum frequency, usually the larger the pendulum amplitude, the smaller the pendulum frequency, and the smaller the pendulum amplitude, the greater the pendulum frequency. Generally, watches rely on the retraction and release of the hairspring to control the swing, which is the basic principle of adjusting the speed and slowness. If the hairspring is longer, the swing will increase, the frequency will be smaller, and the watch will be slower; Conversely, the more the pendulum frequency increases, the faster the watch will be.

2. The structural problem itself, due to the gravitational force of the earth, the offset of the horizontal position and the vertical position will produce a displacement, the mainspring is tightened from the top to the relaxation, the torque is unbalanced, and the external temperature, magnetic field, vibration, etc., even if the mechanical watch increases some frequency, it is impossible to achieve the accuracy of the quartz electronic watch.

3. The effect of the magnetic field, after the hairspring is magnetized, the circle between the rings is only shown when wearing, there is a sticky or short-term lap, especially in the façade, the hairspring will hang down due to its own gravity, and the shaking of the arm will intensify its radial movement, and the magnetic energy utility is shown because of this.

4. The balance of the balance wheel and the balance spring, especially the balance wheel, the balance wheel is very poor, which will cause the balance wheel to highlight the precision change of the surface under a certain swing.

Adhesion by magnetic field swimming. Fall, knock, violent collision, adjust the speed of the hairspring is very soft, very thin, very fine, very elastic, easy to hang on the small parts of the balance, so that the balance wheel goes fast, the watch goes fast. If the above situation occurs on the watch, it is recommended to take it to the center immediately to solve it, so as to avoid further damage to the watch after a long time.

Reasons why the watch goes fast:

1. If the wearer has a vigorous movement acting on the balance wheel, which aggravates the rotation amplitude of the balance wheel, it will cause the watch to swing and speed up the time.

2. The magnetization of movement parts is also one of the main reasons for the acceleration of the watch.

3. The watch has suffered a collision, and there will also be a problem, that is, the secondary outer ring of the hairspring may touch the outer pile of the hairspring, which will appear on the façade and in the dynamic form, which is also one of the fault problems that affect the walking at hand.

The magnetic field is everywhere, and it is impossible to prevent it, and it turns out that with a good end of the watch, the error suddenly becomes larger, and the first thing to guess is whether it is magnetized. There are many steel materials in mechanical watches, such as large and small steel wheels, escape wheels, shaft tenons of gears, bearings, screws and hairsprings, so watches are very susceptible to magnetization. Once the mechanical watch is magnetized, the impact is first of all to increase the error, and in serious cases, it will also stop the watch.

When wearing a watch, if the watch accidentally comes into contact with a generator, motor or other objects with a strong magnetic field, or if the watch is left on the radio or TV, the watch will be magnetized, and the watch will be inaccurate, or even stop. In this case, you should repair it to a professional as soon as possible to ensure that the watch will not cause more inconvenience to your daily life after it is demagnetized. So I would like to remind you that when wearing a watch, you must pay attention to keeping the watch away from objects with strong magnetic fields, so that you will not worry about your beloved watch being demagnetized.