How do I burn the installation software on my hard drive to a CD? 20

Make a Windows series bootable installation CD book.

Introduction – Bootable Disc Boot Principle.

A bootable disc is one that can be loaded with the corresponding operating system boot image file from the disc when your PC boots up to complete the boot. It is able to boot because the boot information recorded on it conforms to the ISO9660 standard, which defines the 16th sector of the disc relative to the beginning of this paragraph as the primary volume descriptor, and the El Torito standard defines the 17th sector of the last segment of the disc as the boot record volume description "boot record volume". descriptor”。 When booting on a CD, the system BISO can easily find the segment with boot information on the CD based on the description information of the primary volume, and then press the absolute pointer in the volume description information to read the boot catalog file, and then read the corresponding boot image file to complete the boot process.

A common way to make a bootable Windows disc.

1.Use ISO files.

This is the most convenient way to do this, as you only need to burn the corresponding ISO file to the disc, but you can't add or remove the files from the disc as needed.

2.Use the floppy disk emulation method.

Commonly used burning software such as Nero, Easy CD Creator, and WinonCD all offer this feature. As long as you check the "Make Boot Disc" option in these software, it can extract the boot image files from the pre-prepared boot floppy disk and burn them to the disc, thus emulating the floppy disk boot with the disc.

3.Use cdrwin to extract the boot image file from the original disc.

4.Made using the tool cdrpack using bart.

This method uses a burning package with a size of only 640K, which can be done under DOS, and is relatively flexible, suitable for the production of various types of bootable installation discs, which I will introduce in detail below.

The system requirements required to make the following discs.

Have Windows 98 ME or Windows NT SP4+ or Windows 2000 or Windows XP. installed

Recorders with SCSI or ATAPI interfaces.

A blank burning disc (CDR or CDRW).

A PC booted from a cdROM to detect the finished burning disk.

An optical drive can be used to burn discs, however, not a general optical drive can burn discs, the optical drive that can burn discs is called a disc burner, and CD-R and CD-RW are both disc burners that can be used to burn discs. So, if you want to make important materials into discs, you must buy a disc burner. CD-R disc burners can only use CD-R discs, and they can only burn them once; CD-RW disc burning machines, on the other hand, can use both CD-R and CD-RW discs.

When using a CD-RW disc, you can burn the data multiple times, but if you use a CD-RW disc, you can only burn it once. In addition to buying a disc burner, you also need to install disc burning software, such as Easy-CD Pro, Easy-CD Creator, Nero, WinonCD, etc., which are commonly used burning programs. Usually when you buy a disc burner, you will come with free burning software.

Once you have a disc burner and a burning program, you can burn the disc yourself.

Nero Disc Burning Tutorial: