What are the inefficient learning methods for a first level fire engineer How many points do you hav

A few tips on preparing for the Fire Engineer I exam.

To prepare for the exam, you should pay attention to the method and study efficiently. Whether the method is appropriate or not directly determines the success or failure of the exam. Each discipline has its own laws and characteristics, and it is necessary to grasp these characteristics and achieve twice the result with half the effort. Give a general advice:

1.To complete the class content with high quality;

2.Be sure to review the content of the teacher in time after listening to the class, especially the after-class practice questions of each chapter, you must do it yourself when reviewing, not just watch, because there is a big difference between being able to understand and being able to make it independently.

3.When completing a topic, we should consider the knowledge points examined by the topic, what type of question type it belongs to, and what kind of good ideas, methods, and templates there are;

4.The study time should be reasonably arranged, and the study should not only look at the foundation or professional practice for a long time, and the study should have a reasonable match.

One: Reading is not detailed, not thorough, swallowing dates, rote memorization, and no understanding.

Reading books is always guided by the syllabus, and the knowledge points outside the syllabus are ignored, resulting in more points and heavy losses when encountering knowledge points outside the syllabus when taking the exam. There are many knowledge points in the first-level fire engineer that require us to memorize comprehensibly, rather than rote memorization, which will waste a lot of time and result in half the effort. Therefore, candidates must learn to understand memorization and integrate it with actual work.

This is beneficial and harmless for the exam.

2. Blindly divide the key and non-key points, invest too much energy in the key parts, and hastily pass the non-key parts at a glance.

What you get in the exam is the key point, and what you can't get is the non-focus. Therefore, candidates must make a review plan before preparing for the exam, and determine the key and difficult points according to the content of the exam syllabus. In order to facilitate contentious revision.

3. Passive acceptance when doing mock questions, not good at combining teaching materials, drawing inferences from one another, and not delving into the reasons for vague questions, so that the next time you encounter the same topic, you will make the same mistake.

This situation is a situation that often occurs to candidates, so when preparing for the exam, we should conduct in-depth research on our own ambiguous and important problems and solve them, so that we will not lose again in the examination room.

The subjects of the fire engineer exam include "Fire Safety Technical Practice", "Comprehensive Ability of Fire Protection Technology", "Fire Safety Case Analysis", and "Fire Safety Case Analysis".

1. First of all, the content of the first-class fire engineer exam is relatively simple, but the test center is very extensive, basically covering the content of the entire textbook, which requires the candidate to be very familiar with the textbook, at least read it twice, in order to be familiar with the textbook.

2. Secondly, when reading the textbook, pay attention to taking notes on the key content, and take notes on the content that you don't quite understand or difficult to understand when reading, so that you can jump out of the textbook and review the notes directly when you review after reading the book, so as to deepen your impression and understanding.

3. Again, after the foundation has been laid, at this time, you must decide whether you need to learn the fire engineering course of online courses according to your actual situation. **Courses are available for purchase at (Exam 100 software). Although some candidates prefer self-study, the efficiency of self-study is obviously slower than that of having an online teacher.

And if you have procrastination, I'm afraid it's better to find a more executive method, so it is especially recommended to dredge the overall structure of knowledge points through online classes** to deepen understanding and memory.

4. In addition, it is necessary to develop a review plan, and complete it in a timely manner according to the quality and quantity, do not delay and do not fool yourself, only in accordance with the plan to review in a timely manner, to ensure the quality of the effective results of the review, in order to achieve good results.

5. At the same time, the review of the first-level fire engineer exam should be carefully practiced and done, including past real questions and mock questions, and the questions you did wrong should be recorded in a notebook, and you can review it repeatedly in ordinary times and when the exam is approaching, so as to deepen your impression and avoid making the same mistakes. At the same time, in the process of review, on the one hand, we should pay attention to the integration of the whole textbook and thoroughly understand the content, and on the other hand, we should develop the logical thinking of reading and reviewing the questions, and avoid multiple choices, fewer choices and missing selections.

The specific situation of each person is very different, but in order to finally pass the qualification exam, you must work hard, believe that "success comes naturally", meet the challenge with a healthy attitude, face it bravely, and find ways to overcome it.

First of all, the first article of technical practice, roughly browse, the most basic branch of the ground trembling of the basic things, combustion, fire, **, 15 years of questions on the practice of the first multiple-choice question.

The second building fire protection design must be the top priority, there is no doubt about this. Since it is not good to teach the destruction of materials, it is recommended to directly look at the explanation of the provisions of "13J-811 Reform - Building Fire Protection Design Atlas" and GB50016, which first contains all the provisions of GB50016, and also uses the method of illustration to explain to help understand. When the two books are read in comparison, the interpretation of the provisions is also helpful to understand; GB50016 must be familiar with the chest, otherwise it will be the denominator when you go to the exam.

The first-class fire engineer qualification examination adopts the method of defeated written examination and closed-book examination. The Ministry of Human Resources and Social Security organizes experts to examine and approve the subjects, syllabuses and examination questions of the first-class fire engineer examination, and determines the qualification standards in conjunction with the Ministry of Public Security, and guides, supervises and inspects the examination work. In principle, the examination is held once a year, and the examination time is generally in mid-November every year, and the registration is concentrated in August.

1.Familiarize yourself with the exam syllabus and exam content. Understand the scope and focus of the examination, collect relevant materials and teaching materials, so as to conduct in-depth grasp and research of key knowledge points.

2.Learn and master the relevant professional knowledge. Including knowledge of fire regulations, fire protection design, fire construction, fire science, water supply and drainage, electrical automation, building structure, etc.

It is recommended to follow the all-subject ** class of exam 100 for systematic study and review.

3.Familiar with the selection, installation, commissioning, maintenance and use of various fire-fighting equipment. Fire-fighting equipment is an essential tool for fire engineers, who need to learn systematically and carry out practical operations to understand the coordination of various fire-fighting equipment and enhance their skill level.

4.Do more exercises and mock tests to strengthen your answering skills and coping skills. Take mock exams, adjust your answering strategies, and fill in the gaps to better prepare for the exam.

Use [Exam 100] to do the questions, I think you can grind the real questions more in the brushing stage, and you can also do it in accordance with the time and requirements of the exam in the final sprint stage, and do the real questions a few more times if you can do them a few more times!

The chapter exercises in it are designed according to the requirements of the textbook's exam syllabus, according to the content form of the chapter table of contents, and you can click on the specified content to train what you need, and this question bank is updated from time to time. The key is that it also has a test friend bureau note function, for friends who are not good at basic knowledge, you can find the test center interpretation you want in the test friend area, and there are a large number of free test centers, you can complete the memory when you take the bus or subway, and you can memorize the knowledge points by using the fragmented time, which is of great help.

There are only about 4 months left before the first-class fire engineer exam in November, and the time is limited, and candidates should know that the key to doing a good job of review work on time depends on their own efficiency, and they can't rush to carry out the review work, so how to improve efficiency? Details are as follows.

3. In the later stage, you can only rely on your own summary, check and fill in the gaps, listen to the explanation of the test center of the authoritative god, and it is best not to think about the question, and there is no case of pressure accuracy;

Fourth, I believe in what the authoritative lecturer said: the key point is always the key point. For example: automatic fire alarm system, more than 10 cents per year;

5. Talk about answering skills: First of all, the handwriting should ensure that others can read clearly; secondly, understand, pertinent, comprehend the intention of the questioner, and the regulations are clear; Finally, I really can't put pen to paper, so let's copy the background of the original question along the lines of the question. Curve.

Sixth, the focus of the case, on those three chapters, must be combined with the norms, this year, the new regulations on smoke prevention and exhaust have just been introduced, to focus on.

7. Other notes: Pay attention to the test time, and control the answering time of each major question within 25-28 minutes.

How to grasp the key points with more content?

Now there are more than four months of review time for candidates, and since the time is limited, candidates should clearly focus and prioritize when there are still many contents that have not yet been reviewed. If you have systematically studied or sorted out the content of each subject before, then it is not difficult to distinguish the key points that should be respected, if you do not do these jobs well, then take out the real questions of the past two years to do a bright oak, and you can also find the key points in combination with the new version of the syllabus textbook. Spending your limited time in the right place is the only way to be more efficient.

Tight on time or self-study?

The review stage can be said to be a key stage to make up for the previous missing problems and prepare for the subsequent sprints. It is recommended that candidates with poor foundation and first-time applicants should choose the right tutoring class at the moment, because the course is guided by teachers with rich teaching experience, and the content of the class is generally selected as the focus, which is a good help for candidates with poor foundation and little experience, which can effectively improve efficiency and avoid delaying time.

It's a pleasure to share with you your questions about Fire Engineers.

Among the three subjects of the fire engineer exam, the foundation is fire safety technical practice, and if you master and understand this book, you will be half successful. To understand and master the content of the textbook, the key and core are the second and third parts, which have a lot of numbers and basic knowledge that must be kept in mind. Don't memorize by rote, compare and summarize before and after, and use good memory methods, such as memory palaces to memorize, so that there is a good effect.

Finally, doing the right questions will help you adapt to the exam.

Good luck with the first pass.

The most basic idea of the first-class fire engineer exam is:

Look at the textbook - find the key points - establish a knowledge system and form a foundation - overcome difficulties - practice exercises - finally, sprint to mock questions and real questions!

If you prepare for the exam in this order, as long as you don't play soy sauce, you will have no problem taking the exam!

Hello, it's generally mentality, planning, means, resources.

Mentality from the beginning of the school to see the pass rate did not dare to take the test, see the time is still early, three days of fishing and two days of drying net learning, close to the exam when the nervous, study when the square inch is messed up, the exam is still because of nervousness, grasp the time is sometimes because of excessive tension and forget the content.

If you don't have a good plan from the beginning to the end of the plan, you will spend 100% of your time learning 50% of the content, and with a good plan, you will be able to learn 90% of the content in 30% of the time.

The means can be said to be the method, and the specific ones can be judged from the three aspects of principle memorization and problem making, and the resources can be said to be various learning materials and preparation materials.