ASUS laptop cleaning and mounting system

Method steps.

Before cleaning, remove the external devices of the laptop, such as the power supply, mouse, keyboard, headphones, etc., and turn it off.

Turn the computer over and place it on the table, see the back of the computer, remove the battery of the computer, and the screws in the screw holes on the back.

How to clean ASUS notebooks.

Put the computer upright, see that above the computer keyboard, there are four movable buckles, pull the keyboard outside the side and push the buckles in turn with a small driver.

Push all four buckles inward to remove the computer keyboard, and then carefully pull out the keyboard cables and other visible cables.

How to clean ASUS notebooks.

After removing the computer keyboard, you can see the upper panel of the computer, carefully unscrew the visible screws with a screwdriver, and place them in an orderly manner.

If the computer has an optical disc drive, then you can easily pull it out directly by hand, and then remove a screw under the optical drive.

How to clean ASUS notebooks.

After completing the above steps, there is a soft plastic rod or nail, insert it into the gap as shown in the figure, and slowly move it from left to right for a week to remove the upper board of the computer.

How to clean ASUS notebooks.

How to clean ASUS notebooks.

After removing the upper board, you can see the motherboard of the computer, carefully unplug the connection cable between the computer motherboard and other components, and unscrew the connection cable between the motherboard and the back plate, you can remove the motherboard, see the fan radiator, and the CPU is under the radiator.

How to clean ASUS notebooks.

Once you've found the fan, unplug the cable from the fan to the motherboard, and then unscrew all the bolts connecting the fan cooler to the motherboard.

How to clean ASUS notebooks.

How to clean ASUS notebooks.

After removing the fan, tear off the tape that connects the fan to the radiator, and when you see the radiator heat sink opening, you can see a lot of dust. Clean up carefully.

How to clean ASUS notebooks.

How to clean ASUS notebooks.

If you have a computer fan, lubricating oil, etc., you can add it appropriately to the active part of the computer. Also, take care to carefully clean the motherboard dust.

After the computer is cleaned and the dust is completed, the computer can be installed and restored in reverse order. Pay attention to the connection of screws, plug wires, etc.

If you find that there is or is suspected to be a fault in the heat dissipation of the laptop, it is recommended to send the computer to the official ASUS after-sales service center, where a professional maintenance engineer will conduct a comprehensive inspection to confirm the fault and clean the necessary treatment. The maintenance, cleaning and upgrading of the whole machine of the brand computer is best done at the official after-sales point of the corresponding brand, and the maintenance skills and specifications of the engineer are definitely more formal and assured, which can ensure the quality of maintenance.

The official after-sales service center of ASUS can be found in the following sections of the official website:

Hello Dear ASUS users recommend that you go to the service center, let our professional engineers help you deal with it, you clean it up privately, if it is within the warranty period, it will affect your warranty.

Personal suggestion: If you have no knowledge of computer maintenance before, it is recommended to hand it over to professionals to clean it up, people have tools to clean up difficult places, I have seen many people disassemble the computer, there are always a few screws left, I don't know how to disassemble it.

Steps to clean the notebook:

With the back side of the laptop facing up, locate the location of the battery board and the motherboard cover.

Remove the battery plate.

Remove the screws with a screwdriver and open the motherboard cover.

When you find the cooling fan, you find that there is a lot of dust inside, which can seriously hinder the heat dissipation of the fan, causing the laptop to die due to high temperatures.

The tools are all ready, and the dust is opened. Blow it with a blow dryer first, and then use a soft brush to clean up the dust and dirt that can't be blown off.

The comparison before and after cleaning the dust is not obvious.

Finally, clean the motherboard cover, and then use a screwdriver to restore the screws.

If the hands-on ability is not strong, it is recommended to find a professional person to clean the ash.

If you have some experience in the disassembly and assembly of electronic products, you can do it yourself,My A6I bought it for nearly 5 years and have dismantled it myself a few times,But to be honest,What needs to be dusted is the heat sink of the heat sink and the small fan of the heat pipe,If you can clean it up with brushes and other tools outside or feel that you don't have to clean it, try not to disassemble the book,I dismantled it a few times before I knew that there would be no dust on the motherboard,There is not much improvement after the big fight,It may also be the sealing of the A6 model。 Of course, it is not necessary to send it for after-sales cleaning, and to be honest, they may not be as good as your own cleaning intentions.

If you want to disassemble, pay attention to lay it flat in a spacious place to prevent the dismantling screws from disappearing, and also to prevent collision. Look at the screw identification of the case,Some are not related to dismantling the shell, so you don't have to take the trouble to dismantle it,Generally, there are a few screws under the keyboard,So it may be necessary to take the keyboard down first,Pay attention to the cable of the keyboard when you take it down。 Nothing else, be careful, if you stop immediately if you reach the difficulty, don't come to the hard one, if you dismantle it yourself, no matter what the problem, the after-sales or other maintenance places will kill you.