Apple lock screen key is out of order, iPhone lock screen key is out of order

The main reason for the failure of Apple's lock screen key is the problem of the capacitive screen, which is most prone to drift and failure. The following is a solution to the problem when the lock screen key of the Apple phone fails.

1. First of all, open [Settings] on the desktop of your phone.

2. On the settings page, click [Auxiliary Settings].

3. On the Accessibility Settings page, click [Touch].

4. On the touch interface, click to enter [Assistive Touch].

5. Finally, click to open [AssistiveTouch].

This should be a problem with capacitive screens, which are the most likely to drift and fail. The reasons and solutions for iPhone lock screen glitch are as follows.

1. First of all, find the "Settings" icon on your iPhone and click to open it as shown in the image below.

2. Find "General" in the settings list and click to open, as shown in the figure below.

3. In the general list, swipe up with your finger to find "Accessibility" and click to open it, as shown in the figure below.

4. Then swipe up with your finger, find "Assistive Touch", and tap to open it, as shown in the figure below.

5. Then slide the switch to set it to the ON state, as shown in the figure below.

<>7. Click the icon, and the system will pop up the accessibility menu. Select "device" as shown in the following figure.

8. Next, we select "Lock Screen". In this way, we can realize the key lock screen function of the mobile phone's power switch, as shown in the following figure.

9. Long press the "lock screen" to open the shutdown interface, but if your power button is broken, please do not choose to shut down. Once the machine is turned off, it cannot be turned on properly.

The main reason for the failure of the Apple lock screen key is the capacitive screen.

The capacitive screen is most prone to drift and failure. The following is a solution to the failure of the lock screen key of the Apple hand starter segment machine.

1. First of all, open the [Settings] on the desktop of the hand-whispered machine.

2. On the settings page, click [Auxiliary Settings].

3. On the Accessibility Settings page, click [Touch].

4. On the touch interface, click to enter [Assistive Touch].

5. Finally, click to open [AssistiveTouch].

4 solutions to iPhone key failure:

1. Apple don't turn off, as long as the Apple phone is not turned off, the power button does not have a particularly big impact on the Apple phone, but you have to always pay attention to the low battery of the mobile phone to avoid the automatic shutdown of the mobile phone.

2. Due to the failure of the power button of the mobile phone in Apple, it is impossible to turn off the lock screen, and turn on the assistive touch gesture function in the setting of the ridge to achieve virtual operation, which can replace the power button of the mobile phone.

3. If the mobile phone is in the warranty period, you can directly take it to Apple's after-sales point for warranty, if the warranty period is over, then you can go to the after-sales service at your own expense.

Hello, it should be a capacitive screen.

The capacitive screen is most prone to drift.

Failure of the situation. The following is an introduction to the reasons and solutions when the lock screen key of the Apple mobile phone fails.

1. First of all, find the "Settings" icon on your iPhone and click to open it as shown in the image below.

2. Find "General" in the settings list and click to open, as shown in the figure below.

3. In the standby list of Tongzhenling, swipe up with your finger to find "Accessibility", click to open, 4. Then swipe up with your finger to find "assistive touch" and click to open, 5. Then slide the switch to set it to on, 6. When "assistive touch" is turned on, the system will display an accessibility icon on the screen by default, 7. Click this icon, the system will pop up the accessibility options menu interface, we select "Device." 8. Next, we select "Lock Screen". In this way, we have realized the lock screen function of the power on the phone, 9. Long press the "lock screen" to open the shutdown interface, but if your power switch is broken, please do not choose to turn it off. Once the computer is turned off, it will not be able to turn on normally.

1. Confirm the ambient temperature.

If the ambient temperature of the mobile phone is too low, it may affect the touch screen effect, it is recommended to keep the mobile phone at 0 35 ambient temperature.

2. Mistakenly turn on the talkback mode in barrier-free.

If you enable the talkback mode, the touch mode will change, and a green frame will be displayed on the screen when touched. You can press and hold the volume up button + down button for 3 seconds at the same time to exit the talkback mode, or double click Settings - double click More Settings - Swipe to Accessibility with two fingers - Double click Accessibility - Double click to close Talkback.

3. One-click acceleration to clear background programs.

If there are too many background programs, or abnormal programs are permanently in the background, which may affect the touch screen effect, it is recommended to speed up or clean up background programs with one click before trying.

Note: Check if it is installed"One-click lock screen"class applications, some third-party"One-click lock screen"The software will conflict with the lock screen that comes with the system, resulting in random jumps, such as jumping to the lock screen, etc., it is recommended to uninstall the third party"One-click lock screen"and other types of software.

4. Whether there is liquid or stain on the finger or screen.

Liquid or stains on your fingers or screen will affect the sensitivity of the touchscreen, so it is recommended to clean it with a clean, dry cloth before trying again.

5. Check the film.

If you use a non-original film, it may affect the touch screen effect, it is recommended to remove the film and try to reapply it or go to the customer service center to reapply the film.

6. Replace the standard charger or data cable.

If you use a non-standard charger, it may affect the phone's touch screen function when charging, so it is recommended to use the standard charger and data cable for charging.

7. Restart your phone.

Please restart your phone or force restart your phone to see if it returns to normal.

Force Restart Method:

Models released before September 2017 (models before x20): Press and hold"Power button"More than 12 seconds.

Models released after September 2017 and new models released later (x20 and later): Press and hold at the same time"Power button"+"Volume down key"More than 10 seconds.

NEX 3 NEX 3S: Press and hold the top round button for more than 10 seconds.

8. Upgrade the system version.

The new version improves compatibility and stability, click Settings - System Upgrade Interface Detection and Update to the Latest Version Usage Observation.

9. Check whether it is a single software or all software in a fixed area The touch screen is not sensitive.

A single software is not sensitive to touch in this area: it is generally a reason for software incompatibility, it is recommended to go to the app store to upgrade the software, and at the same time feedback to the software customer service.

All software in the same position touch is not sensitive: it may be that the screen is faulty, it is recommended to bring the purchase voucher and mobile phone to the vivo customer service center for testing, and enter the mobile phone vivo official website APP--Service--My Service--Service outlets can query the address of the nearest customer service center outlets and**.

1. First of all, find the "Settings" icon on your iPhone and click to open it as shown in the image below.

2. Find "General" in the settings list and click to open it, as shown in the figure below.

3. In the general list, swipe up with your finger to find "Accessibility" and click to open it, as shown in the figure below.

4. Then swipe up with your finger, find "assistive touch" and tap to open it, as shown in the image below.

5. Then slide the switch and set it to the ON state, as shown in the figure below.

<>7. Click this icon, and the system will pop up the menu interface of the auxiliary Yexun function options, and select "Device", as shown in the figure below.

8. Next, select "Lock Screen". In this way, the lock screen function of the power on and off button on the mobile phone is realized, as shown in the figure below.

9. Long press "Lock Screen" to open the shutdown interface, but if the power switch is broken, please do not choose to shut down. Once the machine is turned off, it can't be turned on normally.