I want to take the consulting engineer exam, how do I revise to be effective?

1.Confidence is key. The vocational exam is definitely easier than the college entrance examination, graduate school, and the fourth and sixth level exams, so you must have confidence in yourself.

Since you have registered, you have to make up your mind to pass, and you must not have the attitude of giving it a try. If you're not ready, don't sign up. One blow of strength, then decline, three and exhaustion.

It is not possible to pass the exam the more you take, and most of the people who pass it have passed it once or twice.

2.Teaching materials are the purpose. In fact, there is no focus and focus on the vocational examination, anyway, it is a book, this is out today, and that will be published tomorrow, with a wide range and shallow content.

In other words, you have to thoroughly understand the textbook. You must remember what you should remember, and if you can't remember it, you have to read it a few more times, at least mix it up, choose one of the four multiple-choice questions, and judge if you feel it. Blindly doing questions has little effect, after all, the question is knowledge, and the exam is a face.

3.Time is a prerequisite. At least one year before the exam should be prepared, say it is a year, go to work, family, friends and a lot of other things, there is not much time that can really be used to review, and it is less than three months to really enter the state of the exam.

Don't have the idea of "big exams, big plays, small exams, small plays", that's for the school. The vocational examination is to race against time, make use of the time that can be used in normal times, and not slack off.

4.The plan is the direction. If you don't have direction, you get lost.

At the beginning, you should make a test plan that is more in line with your reality, it doesn't matter if you write it down or not, but you have to be clear that you should constantly compare it with the plan you have made in the specific process, and make adjustments accordingly, The main purpose is to always know your progress and mastery of the preparation for the exam, and you must be in a state of imminent examination until the exam.

5.Mindset is the guarantee. A good attitude will have a good performance, and success or failure may depend on whose mentality is better.

Don't take the exam too seriously, don't take the exam too seriously, after all, if you can't take the exam, it's not that you don't have nothing to eat, always keep a peaceful mind, especially in the exam room, patiently complete every question, even if you are not sure, you must do your best. When I walked out of the exam room, I could say to myself that I had put all my efforts into this time and had no regrets.

About how to learn to be a consulting engineer in 22 years, the best way to clear the customs is to prepare early!

Read books and do questions.

Read the book three times: the first overview, the second detail, and the third overview.

You have to pay more attention to this when reviewing, don't use the sea of questions tactics, you can grab some more typical ones to review, you can go to school** to find some review materials in this area, there are a lot of them, the analysis is also very clear, and the typical cases are also very good.

It is recommended that you go to some engineering and construction forums or online tutoring institutions to check the experience of some students preparing for the exam, and you may be able to find a way to help you study.

The Consulting Engineer exam is difficult.

First of all, any exam is difficult, otherwise, the existence of this exam is meaningless, isn't everyone can get a certificate, but one thing that needs to be clear to candidates is that the difficulty of the consulting engineer exam is not as great as the candidates imagined, the results of the consulting engineer exam can be retained for 4 years, and the exam has only 4 test subjects in total, which is equivalent to taking a subject in a year to get a certificate, is the exam not difficult?

The examination subjects of the Registered Consultant are divided into five subjects: Introduction to Engineering Consulting, Macroeconomic Policy and Development Planning, Engineering Project Organization and Management, Project Decision Analysis and Evaluation, and Modern Consulting Methods and Practices. The knowledge points of the consulting examination are relatively wide, and the macro economy, project decision-making, procurement and bidding process management, project budget management, financial benefit evaluation, etc. The difficulty is there.

But there are still people who pass every year. This requires finding the right direction, making up our minds, and working hard. In addition, it is necessary to have a basic understanding of the content, scope, scoring rules and question types of the test.

Be aware of it, and review it will be more targeted. Make a plan to revise for the exam, step by step, and you will definitely be able to pass the exam.

It is difficult to get a certified consulting engineer.

The knowledge points of consulting engineers are relatively wide, and they must have a more in-depth understanding and comprehensive grasp of project decision-making, macroeconomics, procurement bidding and bidding management and other related aspects.

Secondly, for candidates who take the consulting engineer exam to have a corresponding understanding of the content of the exam, the syllabus of the exam and the types of questions involved in the exam, the consulting engineer is very difficult, and the pass rate is only about 10% since the exam.

Grades management. Examination results are administered on a rolling basis, and those who take all five subjects must pass all subjects in three consecutive examination years; Those who are exempted from some subjects must pass the examination subjects in the current year.

Those who pass the examination will be issued by the Human Resources and Social Security Bureau the "People's Republic of China Registered Consulting Engineer (Investment) Practice Qualification Certificate" uniformly printed by the Ministry of Human Resources and Social Security, and printed by the Ministry of Human Resources and Social Security and the National Development and Reform Commission.

As a national examination for engineering consulting majors, there must be difficulty, after all, the registered professional qualification examination belongs to the talent selection examination, which is different from the vocational examination such as the certificate of employment, and after passing the certificate, it is necessary to register and manage, and then implement the seal authority, so this examination still has a certain degree of difficulty.

It's still difficult.

Protect the fate of the Lord every time he takes the exam, open the treasury and gather wealth!! First of all, the knowledge points are relatively broad, and it is necessary to have a deep grasp of macroeconomics, project decision-making, procurement bidding process management, project budget management, financial benefit evaluation, etc., and have a basic understanding of the content, scope, scoring rules and question types of the examination. Otherwise, it will be more difficult to pass.

From the beginning of the exam, the cumulative pass rate is only 10%.

1.Keep an eye on the exam.

The exam dynamics here include: When is the exam? When to register?

Which version of the textbook and syllabus are used? What's changed? How many subjects do I need to take for the exam?

How long does the exam take? What are the eligibility criteria? How many years can the results be kept?

and other important information related to the exam.

However, no matter what happens next, the original intention of the Consulting Engineer exam will not change, so candidates can start preparing for the exam with confidence. To prepare for the exam in order from easy to difficult, candidates should pay attention to the time to prepare for the exam, our ultimate goal is to pass the exam, and the preparation must be focused. I believe that through their own efforts, candidates will be able to successfully pass the 2020 first-class cost engineer exam!

2.Review the textbook carefully.

The 2019 Consulting Engineer Exam uses the new version of the exam textbook and syllabus, and now the review of the guys should be subject to the new version of the textbook and exam syllabus. It is necessary for candidates to carefully review the textbook to make up for the lack of professional knowledge and lay the foundation for the exam.

Focusing on the revision of the old and new textbooks, you can listen to the lessons based on the new textbooks from the beginning, or you can listen to the special explanations of the comparison between the old and new textbooks; At this stage, it is necessary to further understand the knowledge points on the basis of the preliminary understanding in the early stage and form a knowledge system, which is like building a building, and the construction of the framework structure should be completed at this stage.

3.Do the past papers.

Candidates must do the past questions, the past questions are an important review material for the consulting engineer exam, and it is the essence of the exam.

Learning is sometimes boring, and some knowledge points are complicated, which will make you want to give up while learning! At this time, you must persevere, it is too difficult, you can put it aside for a while, and then focus on the difficult points after learning some knowledge points that are easy to grasp.

To sum up, if candidates want to do well in the 2020 consulting engineer exam, in addition to having a comprehensive understanding of the exam, they must also take the textbooks and past questions seriously, and then the candidates themselves should also calm their minds, study hard, lay a solid foundation, and master the easy test points. Believe in yourself and you will definitely be able to win the Consulting Engineer Exam 2020! Let's work together!

Is it difficult to learn to be a registered builder? This varies from person to person, after all, everyone's educational background, basic level, and learning ability are different. If you understand the requirements for applying for the registered construction engineer examination, you can judge it according to your own foundation.

1) Those who abide by national laws and regulations and meet one of the following conditions can apply to participate in the first-class construction engineer qualification examination: 1. Obtain a college degree in engineering or engineering economics, and work for 6 years, including 4 years in construction management of construction projects. 2. Obtain a bachelor's degree in engineering or engineering economics, and work for 4 years, including 3 years in construction management of construction projects.

3. Obtain a double bachelor's degree or graduate degree in engineering or engineering economics, and work for 3 years, including 2 years in construction management of construction projects. 4、…

Registered Consulting EngineerThe pass rate is roughly 20-25%.There is a certain degree of difficulty in the examThe examination results are managed on a rolling basis for a period of 4 years. Those who sit for all four subjects must pass all subjects within 4 consecutive examination years.

Consulting Engineer Exam Answering Skills

1. Candidates should pay attention to the words written when answering the questions of the consulting engineer on the test paper, and never be too close to the sealing line, when sealing, it is easy to seal the words that are too close, so that it is difficult for the person who evaluates the test paper to see the words you write.

2. When answering the consulting engineer questions, you should see the questions clearly, grasp the main points, and answer the questions, otherwise you will not be given points even if you write more.

3. If you encounter a time when you are not sure what specifications to use, then use other pronouns to replace it, for example, add a sentence before the content of the answer, according to the relevant laws and regulations, so as to improve the accuracy of the answer. This is one of the more effective ways to score points.

4. According to the amount of questions, master the speed of answering, have a rough schedule in the process of answering, do the easy and will do the questions when answering the questions, and leave the difficult questions or unfamiliar questions to the end, and don't delay too much time on a question and affect the rhythm of answering the questions later.

As we all know, the examination time for consulting engineers is generally in April every year.

Now it seems that there are still 5 months left until April next year, and many test takers are wondering: Will it be too early to start preparing for the exam now? In addition, many candidates may be preparing for the exam for the first time, so they are also confused about how to study.

Xiaoyou picked out the cheats of Xueba to share with you, hoping to help you.

Wouldn't it be too early to answer first, where is there a dislike for the exam too early, only dislike is not early enough, earlier preparation means more time, and the probability of success is greater if you start earlier than others.

Then answer how to learn how to prepare for the consulting engineer exam effectively, in fact, there are six words: watch more, think more, practice more.

1.See more. When you decide to go for the exam consultation, the first thing you need to do is to look, what to see? Look at the content of the exam, what subjects to be tested and in what form, consulting engineers have carried out reforms after 16 years, and currently take 4 subjects: "Macroeconomic Policy and Development Planning", "Engineering Project Organization and Management", "Project Decision Analysis and Evaluation", "Modern Consulting Methods and Practices".

First go through the textbook yourself, take a cursory look, and then read it again, this time you have to take out what you are not familiar with, and then follow the teacher to learn again, once raw twice cooked three times, read more.

2.Think more. This is easy to understand, that is, you will always encounter some questions and chapters that you don't understand very well when studying, at this time, don't rush to find the answer, you should first think of the solution yourself and then write down your own ideas, or communicate with other colleagues, classmates or seniors and then look at the standard answers. Keep your mind moving, and don't try to find standard answers when you encounter a problem.

3.Practice more. Needless to say, what's the use of not practicing questions on the exam? Only continuous practice can make enough progress, and the better way to practice is to practice past papers, especially past past papers.

The last point is to be calm, consulting engineer is not too difficult to take the exam, generally speaking, as long as you are serious enough, you can pass well.

Okay, how do engineers learn better? Is there any way to do it? Of course, I have to study hard to do this.

Consulting an engineer, so far it is better to learn, just take a step-by-step approach.