How to cancel the sign 408 tire alarm indicator?

If there is no problem with the tire pressure, you can clear it directly with the instrument, and you can reset it to eliminate it on the navigation panel.

Dongfeng sign 408 maintenance light how to eliminate:

1. Turn on the power supply (no need for the engine) and clear the small mileage of the dashboard.

2. Press the button on the right to adjust the display to instantaneous fuel consumption.

3. Turn off the power, then press and hold the right button without letting go.

4. Turn on the power self-test and continue to press the right button for more than three seconds.

5. Release the right button, immediately press and hold the left and right buttons at the same time, release the two buttons within two seconds, and the small wrench disappears. The focus is on more than three seconds and no more than two seconds.

Go to the tire pressure setting and recalibrate it, provided that the tires are inflated to the standard tire pressure and the four tire pressures are the same.

1. The tire pressure monitoring light is on due to the tire being punctured.

This situation is usually very slow air leakage, for a while can not find out which tire is it, at this time you can use the tire pressure gauge to measure, front, rear, if there is a lack of air, make up, and then observe the tire pressure warning light, if a few days later and on, it may be necessary to pick up the tire to check. 4S shop, the usual way for maintenance personnel to deal with it is to adjust the pressure of the two front tires to, adjust the pressure of the rear tires, and then cut off the tire pressure alarm, and let us run another day to see, if you don't call the police again, it will be no problem, and then call the police may have a tire that has been punctured, and you need to go to the 4S shop again, so that they can help check and check.

2. The tire pressure monitoring light is on, sometimes the tire pressure is too high.

Generally, the international GBT 2978-2008 standard stipulates that the inflation pressure of car tires meets the requirements of Table 1-Table 15

Standard tires:; Reinforced tires:; Maximum air pressure: should not be greater than.

3. The tire pressure monitoring light is on due to low tire pressure driving time for too long.

This situation usually occurs when the tire pressure of a tire is too low, and the tire temperature rises due to high-speed operation, which causes the tire pressure to rise, and then the tire pressure rises, so you should stop and rest in time or replace the spare tire.

4. The tire pressure monitoring light is on due to the low tire pressure that has not been refilled for a long time.

When the air pressure is lower than the bottom, the tire pressure monitoring light is on, so you should usually do a check to see if the tire pressure detector is normal. When the car is in trouble, if the tire pressure monitor does not alarm in time, it is a problem with the tire pressure monitor; If the ignition switch is on start, the indicator light point and the TPMS indicator light will be on at the same time for 2s and then turn off.

The front door on the right side opens, and there is a gear plate on the side of the console, which is opened, and there is a red button in it, turn on the engine and hold down the button, and the alarm is first flashed and then This is Buick's manual elimination method Each car series has a different method. Some cars, as long as the air pressure of the four tires is adjusted, will automatically extinguish after driving for a while, and some cars can only be eliminated by computer.

Applicable models: Peugeot 408-2016.

Method: Start the vehicle, find the - Vehicle Settings in the central control screen, and calibrate the tire pressure! Tested on October 6, 2018.

Peugeot 408The tire pressure reset button is on the navigation screen, and it is not difficult for the owner to deal with this situation, and the vehicle information can be reset.

Start the vehicle, adjust the vehicle setting options on the dashboard through the multi-function steering wheel button, find the tire pressure calibration, determine the tire pressure calibration, and complete the elimination of the tire pressure light of the car model.

The tire pressure reset button is present in many cars, and it may seem like it is useless, but this idea is wrong. The presence of this button can quickly change the tire pressure of the car tires. In addition, tire pressure monitoring is also commonly present in automobiles.

The system is used to pay attention to the change of car tire pressure at all times, and when there is a problem, it can give feedback to the owner in time.

There are a lot of cars that have this kind of system today. The function of this system is to prevent punctures, which can prolong the life of car tires to a certain extent.

Tire pressure monitoring can not completely prevent accidental punctures, the role of tire pressure monitoring is to monitor the pressure status in the tire in real time, when the temperature is high, the rolling resistance of the tire increases, or the friction with the ground.

When it is increased, the pressure inside the tire is greater than usual. At present, some high-end tire pressure monitoring will automatically sound when the tire pressure is too high or too low. Especially when driving on the highway, if you find that the pressure of the tires has been exceeded, it is best to release some gas in the tires to prevent punctures caused by high tire pressure.

When the tire pressure monitoring warning light is on, park the car in a safe area. Get out of the car to check the condition of the tires and refill the tires that are out of air. If there is no abnormality in the condition of the tires after checking, it may be a false alarm, and you can select the tire pressure reset in the vehicle settings in the settings to reset the cavity search.

The premise is that the tires are inflated to the standard tire pressure and that all four tire pressures are the same.

Dongfeng Peugeot 408 ( Check price |.)Model details ) belongs to indirect tire pressure monitoring, does not display the value, tire leakage of more than 50%, and has to travel several kilometers to display an alarm symbol, and can not judge which tire is broken. Indirect tire pressure monitoring, which belongs to the entry level, will not display tire pressure and temperature, at a speed of 43-100 kilometers when the tire pressure drops less than 20% will alarm, you need to use a tire pressure gauge test or drive to the tire shop repair shop to detect to know which tire is flat.

This system compares the speed difference between tires by the wheel speed sensor of the automobile ABS system, so as to achieve the purpose of monitoring tire pressure, and the main disadvantage of this type of system is that it is impossible to judge the condition that more than two tires are out of air at the same time and the situation that the speed exceeds 100 kilometers per hour. The most important thing is that the tire pressure monitoring can only be activated after the ESP is started (speed 43 per hour). (Photo by photo:.)

Wu Binbin) @2019