What brand of Buick Kaiyue original brake pads

Buick Excelle. Brake pads belong to Buick cars.

Original brake pads.

The brake pads of the Buick Excelle car are not the same before and after, but they are replaced together. Brake pads are the most critical safety parts, and all brake pads play a decisive role in the quality of the brake effect, so good brake pads are the protectors of people and cars. Check the brake pads frequently.

The front and rear brake pads do not need to be replaced together, the two are different in the replacement cycle, relative to the front brake pads, the service life of the rear brake pads is longer, if the car is in accordance with the normal driving situation, the front brake pads need to be replaced for about 3-50,000 kilometers, and the rear brake pads can travel about 6-10 kilometers and then replaced.

AC's, but there are too many fake ACs out there.

Kaiyue's brake pads are matched with Beitai's, but there should be more AC Deco on the market, and there is no need to introduce some other brands.

In the general repair shop, a pair of medium-quality front films (two front wheels) is about 150, and a pair of rear pieces (two rear wheels) is about 120, and the total cost of working hours is about 80 yuanThe total is about 350 yuan. It is estimated to double in the 4S store, around 700 yuan.

Buick Kaiyue brake pads 40,000 kilometers replaced. Brake pads are wearing parts, and the replacement cycle of brake pads is determined according to the driving habits of the owner; The thickness of the vehicle brake pad is worn to the original 1 3 and needs to be replaced, if the brake pad is not more slippery in time, it will cause the vehicle brake to lose control, affecting the safety of driving.

Precautions for replacing brake pads.

1. Before replacing the brake pads, you should open the lid of the brake fluid reservoir in the engine compartment to see the height of the brake fluid page, if the brake fluid page is above the highest limit, you should suck out some brake fluid to prevent the brake fluid from overflowing during the replacement process.

2. Prepare the brake pads to be replaced and remove the wheels where the brakes are located. During the dismantling process, avoid scratches on the rims.

3. Remove the bolts of the brake caliper with a wrench combined with the sleeve, and then remove the brake pad (if there is a brake induction line, the brake induction line should be removed first). Observe whether the brake pads are overworn, or cracked, and if so, replace them in the next step.

4. Since there will be a lot of sand or mud in the brake caliper, it should be cleaned with a rag, and then apply silencer paste to prevent abnormal noise when braking.

1.Buick Kaiyue brake pads are divided into two kinds of front and rear ** are not the same. For the front brake pads, it is generally 300-500 yuan a pair, and for the rear brake pads, it is generally 220-350 yuan a pair.

2.Note that the purchase of brake pads is a pair, because the brake disc uses two brake pads to brake the wheel, so don't buy just one brake pad.

3.Generally, the brake pads purchased by direct repair shops are free to install, after all, the installation fee has actually been included in the **. So it is recommended to go directly to the repair shop to buy a replacement.

Hello, if you replace the brake pads for this car, the cost is generally about 200 yuan, and you can go to the repair shop to replace the brake pads.

Two brake pads on the front wheel plus brake fluid 240 yuan, friend store, I don't know if it's expensive.

Hello, it probably takes more than 200 fees, because the region is different, there will be a difference. If you don't understand it, please feel free to consult me, you can click on the avatar to follow me, or you can consult me one-on-one to ask me questions, which can be a good answer for you

Buick Kaiyue uses ceramic brake pads, which are made of good wear resistance and mechanical strength, as well as low braking noise.

Buick Kaiyue brake pads are made of ceramic, the brake pads of this material are due to the good wear resistance and mechanical strength of the brake pads of this material, as well as its low braking noise, the brake pads are composed of steel plate bonding, thermal insulation layer and friction blocks, the friction blocks are composed of friction material adhesives, and the brakes are squeezed on the brake disc or brake drum to produce friction, so as to achieve the purpose of deceleration.

The front brake pads of Buick Kaiyue are replaced once every 40,000 kilometers, and the brake pads are also called brake pads, which refer to the friction materials fixed on the brake drum or brake disc that rotate with the wheels, and the friction linings and friction pads bear external pressure to produce friction to achieve the purpose of vehicle deceleration. The manufacturer of the Kaiyue is SAIC-GM Buick, the engine has a maximum horsepower of 107 ps, a maximum torque of 133 Nm, a four-door five-seater sedan, and a five-speed manual transmission. The car is equipped with a tire pressure monitoring device, a full seat belt warning system, ABS anti-lock braking system, brake force distribution system, and brake assist system.

The thickness of Buick Kaiyue brake pads is viewed as follows:

1. When the naked eye can see that the brake pad is only 1 3, increase the self-test frequency and prepare to replace;

2. There are protruding signs on both sides of the brake pads, and the thickness of this sign is replaced when it is about two or three millimeters;

3. Replace the brake pads on the fixed brake caliper when the thickness difference between the two sides reaches the mark, and replace the brake pads on the floating brake caliper when the thickness difference between the two sides reaches 3mm.

Photo by Pacific Automobile Network Q&A).

The Buick Excelle has four brake discs. Buick Excelle brake discs do not have a specific replacement cycle. When the mileage of the vehicle reaches 100,000 km, the brake disc of the vehicle should be checked. If it is damaged or worn to the limit, it should be replaced in time.

Follow these steps to replace the brake disc:

1.Check the degree of wear and tear of the brake discs. During normal maintenance, there is no need to replace the brake disc. According to the actual situation, judge whether to replace the brake disc. The brake disc has a notch of more than 3 mm and can be replaced.

2.Remove the front tire. To replace the brake discs, remove both front tires. You can see that the disc is the car brake disc.

3.Remove and secure the brake caliper screws. The brake discs are mounted on the front wheel bearings and are held in place by brake calipers on the outside. Remove the two 18 screws on the wrong brake and remove the brake caliper. Because there is an oil pipe connection on the brake caliper, lower it slowly to prevent the oil pipe from breaking.

4.Remove the old brake disc. The old brake disc is installed on the front wheel tremor bearing, which will cause rust on the bearing and brake disc.

At this time, you can use a hammer to tap from behind the brake disc, and turn the brake disc as you knock, which can be tapped on all four sides of the bridge-like brake disc. After a few taps, you can remove the old brake disc.

5.Install new brake discs. After aligning the eyelets of the new brake disc with the eyelets on the bearing, gently tap the inside of the brake disc with a hammer so that it is completely fixed on the bearing;

6.Install the brake caliper. Install the brake caliper in its original position, tighten the two set screws, and use the rotating bearing to observe whether there is any abnormal noise during rotation.

Millions of car purchase subsidies.

The front and rear brake pads are not the same. Brake pads are not the same.

The Kaiyue brake pads are different before and after. As a front drive, the front brake disc is larger than the rear brake disc, and the brake pads are not the same. 40,000 kilometers of Kaiyue brake pads were replaced.

Brake pads are wearing parts, and the replacement cycle of brake pads is determined according to the driving habits of the owner. If the thickness of the vehicle's brake pads is worn to 1 3 of the original thickness, it needs to be replaced. If the brake pads do not slip in time, it will cause the vehicle brakes to lose control and affect the safety of the scattered silver car.

Here's how to replace the brake pads:

1.Before replacing the brake pads, you should first open the brake fluid reservoir lid in the engine compartment and look at the height of the brake fluid page. If the brake fluid level exceeds the maximum limit, you should suck out some brake fluid to prevent the brake fluid from spilling during the replacement process.

2.Prepare the brake pads to be replaced and remove the wheels where the brakes are located. Avoid scratching the rim when disassembling;

3.Use a wrench to combine the socket to remove the bolts of the brake caliper, punch the banquet and then remove the brake pads (if there is a brake induction wire, remove the brake induction wire first). Observe if the brake pads are excessively worn or cracked, and if so, replace them in the next step;

4.Because there will be a lot of sand or mud in the brake caliper, it should be cleaned with a rag and then coated with a sound-absorbing paste to prevent abnormal noise during braking;

5.Use the piston pump to press the piston into a non-movable position, and then install the brake pads to the brake caliper. After the new brake pads are installed in place (the brake induction line should also be installed), tighten the guide bolts to complete the installation;

6.After installation, close the reservoir lid and press the brake pedal several times to reset the brake. Then observe the brake fluid height, which should be within the appropriate height range;

7.After replacement, a test run is carried out to check whether the braking effect is reflected.

Brake pads are not the same.

Millions of car purchase subsidies.