Precautions for changing the dial of a Rolex, how to maintain a Rolex watch

1. The sweat of the watch strap is corrosive, and the leather strap will smell if it is not cleaned in time.

2. The back cover of the watch cannot be opened at will to avoid the entry of dust and affect the normal operation of the watch movement;

3. Do not put the watch into the appliance with the smell of oil camphor, the smell of camphor will cause the deterioration of the surface oil;

4. Do not place the watch near magnetic objects to avoid being magnetized;

5. The watch that has been placed for a long time should be wound regularly within the specified time to ensure the normal operation of the watch;

5. When the watch is damp, the cotton should be pressed on the watch, and then baked with a 40-watt light bulb for 5 minutes to evaporate all the moisture in the watch;

6. The packaging box of the watch should not be discarded, it should be put away, and put it in the box when the watch is not worn to reduce the probability of damage to the watch;

7. Do not wear a luminous ceramic watch to sleep, luminous materials are harmful to the human body.

The first method: baking with an incandescent lamp.

Wrap the watch with several layers of paper towels, then place it at 15 cm of a 40-watt incandescent lamp, and bake for 5 minutes, and the water vapor in the watch will be evaporated. Remember not to bake for too long, and for watches with leather straps, the strap should be removed first.

The second method: put it together with the desiccant.

The water absorption effect of desiccant is much better than that of rice, put the watch and desiccant together, wrap it in plastic wrap, wait for 24 hours, and it will not cause dust pollution.

The third method: put it in rice.

Rice has a good water absorption effect, and every family has rice, and it is easy to use. After 24 hours of placing the watch in the rice, most of the water is absorbed. Finally, take out the watch and gently wipe off the rice dust.

The fourth method: reverse the watch.

In order not to disassemble the watch, you can wear the watch upside down, wear the watch glass on your arm, and discharge the water vapor in the watch little by little.

1) The waterproof rubber ring is easy to deteriorate and should be replaced regularly, or replaced at each repair.

2) The waterproof performance of the watch can be affected by the damage to the glass of the watch, and it should be replaced in time if it is damaged.

3) Do not operate the watch handle in water or when the watch is wet to prevent water from entering the watch machine.

4) After the handle is used, it should be pushed to the end, and the screw buckle handle should be locked on the watch without leaving a gap.

5) Wipe the watch dry at any time if it gets wet.

6) Prevent chemical substances from coming into contact with the watch, otherwise it will affect the case and waterproof rubber ring, and reduce the waterproof performance.

7) Do not leave the watch in a high temperature (10 60) and low temperature (-10) environment for a long time.

8) If there are water vapor mist spots in the watch, they should be removed in time to avoid rust on the parts.

1. The dial is mainly used to display the time, and it is also related to the design of brand-name watches.

2. It can be designed for different shapes, and different materials can also be used, and the time scale can also be selected with simple lacquer printing or protrusion.

3. Commonly used dial materials can be roughly divided into metal, enamel, mother-of-pearl and carbon fiber dials. Metal can be divided into 925 sterling silver dial and lacquered dial, and the lacquered dial is made of brass as the main material, and brand-name watch accessories are the most common one.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the special address of the store, etc., if there is a professional after-sales maintenance center nearby, it is also possible. For more information about watch maintenance issues and related information, you can click **Consultation or Dialing** for consultation, to provide you with professional watch repair services.

The watch should be maintained every 1 to 4 years, replacing the waterproof components, checking the function of the time and the power consumption of the movement, cleaning the movement and maintaining the appearance. This kind of maintenance will effectively extend the service life of your mechanical watch.

Daily maintenance of the watch:

1. Do not put the watch on the stereo or TV to prevent magnetization.

2. Do not put the watch in the wardrobe with mothballs to prevent the watch oil from deteriorating.

3. Do not touch the watch with corrosive substances, especially acidic substances, which will corrode the case.

It is not difficult to take care of your watch on a daily basis, as long as you can do these things on a regular basis, you can trust that your watch can always be kept in the best working condition.

Maintenance method of mechanical watch:

1.If it is a manual mechanical watch, the mechanical watch should be wound regularly, and it is recommended to wind the mechanical watch around 8 pm.

2.Automatic watches, such as insufficient arm movement, need to manually wind the watch, and the rotation of the crown needs to be controlled within 20 turns.

3.If an automatic watch has not been worn for more than 40 hours, it is necessary to turn the crown twenty times to activate the movement's drive system.

4.Regardless of the water resistance of the watch, it should be avoided as much as possible, and if it does, wipe it dry and make sure that the crown is locked at all times. It is best to replace the waterproof ring once a year.

Proper use and maintenance.

1. When wearing a watch, the sweat on the hands is corrosive to the case, the all-steel case is nickel-chromium alloy, the corrosion resistance is better, the semi-steel case is copper, long-term contact with sweat, easy to corrode, should often wipe off the sweat with a soft cloth or pad the plastic watch holder to prevent it from being eroded by sweat.

2. Do not open the back cover of the watch at will, so as not to enter the movement and affect the normal operation of the watch.

3. Do not put the watch in the wardrobe with mothballs to avoid the deterioration of the watch oil.

4. Do not put the watch on the radio or TV to avoid magnetization.

5. Watches that are not worn for a long time should be wound regularly once a month so that the parts will not be in a static state for a long time, so as to ensure the operation performance of the watch machine.

The following operations are included in the watch comprehensive maintenance and repair program:

1.The movement is completely disassembled, cleaned, oiled, reassembled, adjusted, and functional;

2.repair or replacement of any worn or malfunctioning movement components;

Watch maintenance. 3.Replacement of the following parts: the crystal, crown, pushers, seals and batteries of the quartz movement (those included in the service price list, excluding specially shaped mineral glass and sapphire crystal);

4.Restore water resistance (in the case of a water-resistant model);

5.Refurbished case or bracelet (two-tone, gold-plated and PVD-plated case and bracelet, wash only).

How to deal with the wear of the watch glass:

If the watch is accidentally scratched or cracked by a key, it can be used temporarily. However, for watches with precision operation, the waterproof and dustproof performance of the watch will decrease at this time, and it should be replaced by a professional watch store as soon as possible. When there are scratches or slight scratches on the watch mirror, you can first drop one or two drops of water on the watch mirror, then squeeze a little toothpaste, and then wipe it back and forth with a cotton ball to remove the scratches and make the watch glass as new.

In the case of severe damage such as explosions, broken corners and severe breakage, and debris all over the dial, the following measures need to be taken immediately: the first thing to do is to stop the watch. Pull out the watch handle and stop the watch from running.

Pulling out the handle allows the watch to stop, preventing the hands from scratching the dial and date by driving glass shards. Never dial hands and fast-setting calendars, and never try to remove broken glass from the dial yourself. When sending the watch to the watch shop for repair, the watch needs to be placed flat (preferably with the glass side down) in the box, and there should be no violent vibration and shaking during the repair.

During the repair process, the maintenance personnel need to be told not to let the glass shards damage the dial and watch hands.

1. Wear it normally and avoid vibration. Only the appropriate amount of activity can make it continue to be on the bar, and in general, when the wearer is less active, the watch may run slowly, which is normal. It is recommended to rotate the shank 20-30 times when using it for the first time to ensure that the string moves normally.

In addition, although the watch is shockproof, it is easy to break the tip of the pendulum shaft or the journal of the wheel train when the external impact is strong, and it can also make the fast and slow hand vibrate and affect the time.

2. The watch is waterproof. Try not to take your watch to swim or wash clothes, and if it rains or gets wet, don't pull out the watch handle to adjust your watch at this time, but dry it immediately. Since the head of the watch handle is relatively protruding, it should be avoided as much as possible.

At the same time, it is also necessary to pay attention to the gap between the handle head and the case, too small will affect the operation, and too large will affect the waterproof performance, and it will also be unsightly.

3. Prevent magnetization. Although the watch is made of materials that are not easily magnetized, it is greatly affected by magnetic fields when walking, so please stay away from places with magnetic fields. Wear a Rolex mechanical watch normally, try to stay away from the magnetic field, try not to get wet, although the fully automatic mechanical watch has the performance of magnetic field and waterproof, but usually try to pay attention to it, the wearing time will be longer.

Summary. Hello, dear, I'm glad to answer for you. Rolex watches should be kept clean frequently to ensure their proper functioning.

The best way to take care of it is to wipe the hands and case clean every time you take off the strap or clasp to eliminate the dirt and dust that has accumulated during daily use. Wipe the surface with a special care solution or apply a layer of oil to keep the surface and crown shiny. Also pay close attention to the care of the strap, especially the leather strap.

Most leather straps lose their shape in humid environments, so clean them regularly to remove dirt and lubricate them with lotions or oils. If the waterproof function fails or is misaligned, seek professional help as soon as possible to ensure that it can function properly.

Hello, dear, I'm glad to answer for you. Rolex watches should be kept clean frequently to ensure their proper functioning. The best way to take care of it is to wipe the hands and case clean every time you take off the strap or buckle to eliminate the dirt and dust that has accumulated during daily use.

Wipe the surface with a special care solution or apply a layer of oil to keep the surface and crown shiny. Also pay close attention to the care of the strap, especially the leather strap. Most leather straps lose their shape in humid environments, so clean them regularly to remove dirt and lubricate them with lotions or oils.

If the waterproof function fails or is misaligned, seek professional help as soon as possible to ensure that it can function properly.

You have to pay attention to it every day.

The watch cleaning process seems easy, but in fact, there are many places to pay attention to, first of all, we must confirm whether each part, plate, and gemstone are clean? Any remaining dirt must be removed in a reliable manner, otherwise the effect of the oil will be greatly reduced. In addition, the oil used in the watch parts must be a special oil, and the oil on each part is different.

When cleaning the watch, all the watch parts should be disassembled, the movement should be wiped with gasoline, and then other instruments in the watch should be cleaned by professional equipment, and finally oiled and assembled. In addition to the parts inside the watch, the watch shell should also be polished when the watch is cleaned. And after such a complex professional cleaning, old watches can generally be turned into new.

Hello, it is a pleasure to serve you Rolex watch maintenance needs to be carried out at a designated service centerRolex watch maintenance is to be opened, Rolex is generally maintained once every 6 years, daily maintenance depends on Rolex's professional skills, your watch does not need to be deliberately scheduled for daily maintenance. Occasional wiping with a fibre cloth can help maintain the shine of your watch. You can also use soapy water and a soft brush room to clean the case and metal strap.

Before cleaning your watch, make sure that the crown is screwed down to prevent water from penetrating.

Answer: Hello, Rolex watches are big brand watches, and they are not cheap either. You should pay attention to waterproofing during daily wear, and do not bring your watch to wash clothes or swim or anything. If it rains and gets wet, you need to pull out the watch immediately to adjust the watch and wipe it dry.

Try not to touch the handlebar, because it is more uneven, do not let it bump.

You can usually wipe it with a fiber cloth, or you can use soapy water to gently brush the case and metal strap with a soft brush. 

The maintenance cost of Rolex watches mainly depends on the style of the watch, different styles** are also different, the specific cost can be taken to the after-sales center to consult the technician.

1. Tools: magazine, plastic wrap, an old toothbrush and a washing spirit.

Second, the cleaning operation process:

1. Stack the plastic wrap and magazine together, roll them into a cylinder, and wear your Rolex watch on this rolled cylinder. Slowly enlarge the cylinder made of the magazine until the strap is fully propped up and the watch does not fall off. On the one hand, this is done to make it easier to clean for a while, and more importantly, after opening the strap, it can clean the stains in the gaps of the strap.

2. Wash the surface of the Rolex watch strap first, and then clean the stains in the gaps of the strap.

3. Clean the back of the strap and clean the stains on the surface first. Next, scrub the strap clean with clean water. Finally, place the strap in a shaded place to dry.

3. Recommendations for regular maintenance of Rolex watches:

1. It is recommended to go to Rolex after-sales service for waterproof testing every one year, and it is recommended to go to the after-sales service every three years to do a movement cleaning.

2. Because mechanical watches operate with all mechanical parts, the parts will produce sludge after a long time, and there will also be oil scale caused by friction between machinery, so they need regular maintenance.