Why glue the tiles with the back of the tiles instead of cement

A few days ago, I went to the community and found that my neighbor's house was being renovated, and I wanted to go in and have a look, and found that my neighbor's house was all tiled. I thought that my neighbor had really spent a lot of money to renovate the house, but after talking to the neighbor, I realized that it was a project given by the decoration company.

This is the site of the balcony tiling. This is really a big project, I see that the master's craftsmanship is good, and he is very serious. This is the method of dry-laying tiles, which makes it more solid.

Level the ground before tiling. The next step is to apply cement mortar, which can be better bonded.

Cement mortar not only has the effect of bonding, but also makes the tile stronger.

When pasting tiles, you must leave gaps, and you must do beautiful seams in the future.

Once the tiles are attached, hit them with a hammer.

After pasting, don't forget to knock each one through.

Look at the tiles on the wall.

It's the restaurant and the whole house is tiled all over.

This is the effect of the bathroom. This is the bathroom wall tile, look at the master's craftsmanship, really good.

A partition is also designed here, which is very convenient and practical to use in the future.

Disclaimer: Some of the **** in this article is used in part of "Oriental IC", and any newspaper, newspaper, television station, company, organization, or individual may not use it in part or in whole without the permission of Oriental IC. Other **** networks, if they involve infringement, please contact the author to deal with and delete.

The traditional wet paste method of ceramic tiles is to use cement as tile adhesive and white cement as a grout. But more facts have proved that the use of traditional cement paste to paste tiles, even small tiles, porcelain tiles, will still have the risk of falling, and gradually widely used large polished tiles, stone, with cement paste will have more chance of falling off.

When pasting tiles, the use of tile adhesive will make the tile and cement adhere more firmly when laminating, which has the advantage of preventing it from cracking when it is getting longer and longer.

Hello, I'm happy to answer your questions. Yes. (1) The adhesive of the full ceramic tile brush is mainly because it can greatly improve the adhesion force between the ceramic tile and the base layer, and has good performance in the standard concrete slab and glazed brick, effectively improve the bonding strength between the vitrified brick and the adhesive material, and solve the common hollowing and falling off problems in the wet paste of the vitrified brick.

2) The characteristics of ceramic tile adhesive are good flexibility, small hardening and shrinkage, strong compatibility with cement-based adhesive materials, certain anti-seepage performance, anti-aging performance, freeze-thaw resistance, acid and alkali resistance, etc. It can also effectively improve the bond strength between the vitrified tile and the adhesive material, and solve the common problems of hollowing and falling off in the wet paste of vitrified brick. However, when using tile adhesive, you first need to pay attention to the construction environment, the product must avoid rainwater, otherwise it will reduce its adhesion.

No, because you can also use cement when tiling, which is also quite strong.

There is no need at all, because the cement can stand the tiles on the wall, and there is no need to use more expensive tile adhesive.

Tile adhesive is not required, it is only a kind of tile bonding material.

Most of the tile adhesives on the market now belong to dry powder tile adhesives, and in the process of use, they no longer need to mix cement and sand in proportion to the cement mortar as before, and can be used directly by mixing with water.

1. The requirements for the grassroots are different.

Cement mortar paving wall tiles, which can be directly constructed on the brushed layer wall; The use of tile adhesive requires the leveling of the wall base layer before it can be paved.

2. The difference in the bonding strength of ceramic tiles.

Cement mortar paving needs to be the mixing ratio of cement and sand to be appropriate, and the cement content is too high or too low, which may affect the strength of the bonding, and the tile adhesive, without considering the problem of proportional mixing, can be directly mixed with water and used, and it is better grasped in the firmness of bonding.

3. There is also a difference in the cost of the two.

Tile adhesives and construction methods are generally more expensive than cement mortar paving. One is to increase the cost of leveling the wall, and the other is that the cost of materials and construction is higher than the cost of cement mortar and construction costs.

1. The requirements for the grassroots are different.

Cement mortar paving wall tiles, which can be directly constructed on the brushed layer wall; The use of tile adhesive requires the leveling of the wall base layer before it can be paved.

2. The difference in the bonding strength of ceramic tiles.

Cement mortar paving needs to be the mixing ratio of cement and sand to be appropriate, and the cement content is too high or too low, which may affect the strength of the bonding, and the tile adhesive, without considering the problem of proportional mixing, can be directly mixed with water and used, and it is better grasped in the firmness of bonding.

3. There is also a difference in the cost of the two.

Tile adhesives and construction methods are generally more expensive than cement mortar paving. One is to increase the cost of leveling the wall, and the other is that the cost of materials and construction is higher than the cost of cement mortar and construction costs.

Because tile adhesive can better beautify tiles, the use of cement may affect a certain aesthetics.

What is the difference between the tile adhesive used by the decorator and the traditional cement? Today is a long time to see.

Because the tile adhesive tiling effect is better, it has the advantages of high bonding strength, water resistance, freeze-thaw resistance, good aging resistance, etc., and less materials are used in construction, which can save more space, and the bonding is firm and not easy to fall off. The cement mortar needs to distribute the proportion of cement and sand appropriately, and the content of cement is too little or too much will affect the bonding strength of the later tile.

Tile adhesive is easy to use, unlike the cement mortar that needs to be mixed with cement and sand in proportion, and can be blended directly with water.

If the size of the tile is relatively large, the cement paste is not very firm, there may be a danger of falling off, especially for large slabs, it is recommended to use the following paving methods.

There are three ways to pave the wall on the large board:

1.Point hanging, cement wall or woodworking board wall directly with rock slab special nail-free glue and steel gasket point hanging.

2.Wet paste, the wall is required to be leveled first, and then the special adhesive for the rock slab is hung with the rock slab and the wall in a parallel pattern with a sawtooth scraper, and paved with an electric vibrator.

3.Dry hanging, the wall is fixed with anchor bolts in the form of angle iron + galvanized steel pipe, rock slab composite honeycomb aluminum plate or artificial stone, perforated dry hanging, adjustment and leveling.

Recently, Oushennuo bought an infinite continuous pattern slab on the wall, the effect is very good, with a different sense of space extension and texture, you can go to the store to compare the real thing.

Summary. Do you still use cement for adhesive and adhesive for tiling? Hello: I'll help you solve this problem:

No. Paste tiles, after using ceramic tile adhesive, you still need to use cement mortar to pave the brush tile adhesive, but it is not easy to increase the firmness between the tile and the wall, hollowing and falling off, tile adhesive can improve the bonding strength of the tile and the base layer, to avoid hollowing, falling off and other problems, he is just a layer of glue, or need cement when paving.

Do you still use cement for adhesive and adhesive for tiling? Hello: I'll help you solve this problem: it's okay not to touch it.

Paste tiles, after using ceramic tile adhesive, or need to use cement mortar to pave the brush tile adhesive, but it is not easy to increase the firmness between the tile and the wall, hollow drum and falling off stuffy, tile adhesive can improve the bonding strength of the tile and the base, to avoid hollowing, falling off ants and other problems, he is just a layer of glue, in the paving or need cement.

That's the need for cement.

The right pro needs cement.

My home decoration used adhesive, adhesive, and cement are all hollow.

Hollow drums appear in the corners. If there is a hollow drum phenomenon around the perimeter of the Buju tile, first pry open the surrounding of the tile, and then choose qualified porcelain tiles, or use the traditional way to grout with cement mortar. When grouting, it is necessary to gently tap the tile with a rubber hammer, so that it can be filled with four sides, this treatment method is relatively simple, time-saving and labor-saving, and it is not easy to be damaged in the later stage.

Experiments were done with adhesive backing, and adhesive. There are no empty drums.

Now the tiles and walls are separated.

So you still need a pro of cement.

Dear, hello, glad to answer for you, if you want to use tile adhesive to paste the wall tiles on the wall, it is recommended that you apply the adhesive to the wall, not the back of the tile. This can ensure that the wall tiles can be completely bonded to the wall, enhance the adhesion of the glue, and at the same time can also avoid problems such as hollowing and falling tiles due to uneven walls. The specific steps are as follows:

1.First of all, clean and polish the wall surface that needs to be pasted to ensure that the surface is clean and flat, free of oil, dust and other impurities. 2.

Paint the wall with tile adhesive into a thin layer of 7-10mm thick, evenly coat it, and leave a place for the wall tiles. 3.Place the tile on the wall that has been coated with tile glue, gently press it with your hand to make it fit well with the wall, and check for any hollowing and other problems.

4.Paste the wall tiles in turn, such as socks, and each piece should be gently knocked with a rubber hammer immediately to make it fit perfectly with the wall rubber surface. 5.

After all the wall tiles are pasted, wait for the tile adhesive to dry and set, and it usually takes about 24 hours to root and erect according to the product description. It should be noted that the specific use of different brands and models of tile adhesive may be slightly different, please be sure to read the product description carefully, and consult the opinions and suggestions of manufacturers or professionals before construction to ensure the construction effect and safety.

Summary. Tile tiling requires the use of tile adhesive. Tile adhesive can greatly improve the adhesion force between ceramic tiles and base layers, and has good performance in standard concrete slabs and glazed tiles, effectively improve the bonding strength between vitrified tiles and adhesive materials, and solve the common hollowing and falling off problems in wet pasting of vitrified tiles.

Why do you need to use tile adhesive for tiles, and can you not use it?

Tile tiling requires the use of tile adhesive. Tile adhesive can greatly improve the adhesive force of the ceramic tile and the base layer, and has a good performance in the standard concrete slab and glazed brick, effectively raising the bond strength between the vitrified brick and the adhesive material, and solving the common problem of empty field drum and falling off in the wet paste of vitrified brick.

No, no, no.