How to check the information of new motor vehicles sold in 4S stores?

Hello! The general vehicle has a certificate, which has the basic information of the vehicle, and the nameplate on the vehicle body, which is basically on the engine compartment or door frame;

You can also look for it. When 4S vehicles are sold, the vehicle and owner information will be entered into the manufacturer's system;

Or you can also call the manufacturer to inform the other party of the frame number according to the prompts, you can check the owner of the car, the date, the three guarantees and other information, this method can completely solve the problem you raised!

How to check if the car you bought is new

1. Look at whether the date of delivery of the car is far from the date of pick-up on the same day, if the date difference is less than three months, then it can be said that the vehicle purchased is a new car.

2. Check the cleanliness of the engine compartment, because the number of times a new car is on the road is very rare, the engine compartment should be very clean, if there are no traces on the surface of the engine is relatively new, and there is no deposition of dust, then it can indicate that the car you bought is a new car.

3. The owner can put his finger into the exhaust pipe to check the newness of the exhaust pipe, if the finger turns black, then it means that the exhaust pipe has been used for a certain time, indicating that the car is not new.

4. Look at the pedal of the car, the mileage of the new car is relatively small, the pedal should be relatively new, if you can see obvious wear, then it means that the mileage of the car is not a lot.

Things to look out for when buying a car

1. Pay attention to the contract.

When signing the car booking contract, including other contract materials, you should pay attention to every detail of the contract, especially the difference between the "deposit" and the "deposit", the difference between one word may lead to the reservation fee can not be refunded, pay attention to the deposit is they must return, if you don't buy the deposit, people have a reason not to return.

2. Check the car. It usually takes a few days to come back to pick up the car, and the most important thing when picking up the car is to check the car, and only when the vehicle behaves normally in all aspects can the car be taken away.

3. Refuse to soak in water, problem cars and test drives.

Consumers must refuse to accept such cars as soaking cars and problem cars, and resolutely return the car no matter how much the 4S store gives you, because you don't know how harmful these vehicles will be in the future, so as to spend more.

4. All car documents are required.

For example, car purchase invoices, certificates, vehicle consistency certificates, motor vehicle registration certificates, three guarantees of certificates, vehicle manuals, etc., these are all new cars, before paying must check whether they are complete, if any documents are missing, they should be obtained in time at the 4S store.

1. See the factory date

If you come across a model with a long service life but a particularly low mileage, the car may have a problem.

2. Look at the degree of tire wear

The front of the new tire has a computer cable like paint, and there is also tire hair on the side, which will generally wear out after more than 50-100 kilometers.

3. Look at the engine compartment

If you drive a vehicle for a while, these places are prone to dirt and dirt and are not easy to clean.

4. Check the production date on the frame and engine nameplate

See if there are any traces of polishing. The frame number and engine number are the key contents that need to be checked in the vehicle certificate, you can call ** to the manufacturer to consult the date of manufacture of the car, and the manufacturer will be queried in the system.

5. See if there is old sludge on the chassis of the car

If it is an old car, it is difficult to wash off the old sludge. See if the individual parts of the chassis are rusty.

Pick-up attention. The information with the car must be complete, including the purchase invoice, vehicle certificate, vehicle consistency certificate, motor vehicle registration certificate, three guarantees certificate and so on. These materials are very important, and some of them must be used in the later registration, so they must be complete, otherwise it will affect the registration of new cars.

Road tests are generally not allowed for new cars, so after starting in situ, check the engine condition and test other electrical equipment functions, including lights, wipers, air conditioning, multi-**, windows, etc.

Here's how to check if the car you're buying is new

There are many ways to check whether the car is a new car, the most intuitive is to check the appearance of the car, such as whether the paint surface of the car is intact, the paint surface of the new car is different from the paint surface of the old car, and whether the tire hair of the car is all there, this is the best method at present. There is also the fact that every car will have a nameplate with the car when it leaves the factory, and the nameplate will have the engine model of the car, the model of the car, etc., and the most important thing is that the production date of the car is also on it, and the car that is generally more than three months old is not a new car.

In addition, the front windshield of the car and the tires of the car will also have the production date on it, but the production date checked by these two methods is not accurate, because these are replaceable. In addition to the above methods, the manufacturer's manual for some cars may also have the date of manufacture.

Pacific Automobile Network] General individuals can not find out the sales information of the old Qi vehicle on ** or other ways, only in the 4S store, enter the sales system of the 4S store to find out the sales information of the vehicle.

The maintenance items of the car should be maintained according to the actual use. Routine maintenance items mainly include the replacement of engine oil and oil filter, air filter, gasoline filter and pollen filter, spark plug maintenance and replacement, transmission oil and other related system inspection items and maintenance.

1. The replacement of engine oil and oil filter is mainly for the maintenance of the lubrication system. The main function of the lubrication system is to effectively lubricate the various parts of the automobile engine to prevent excessive wear. The function of the oil filter is to remove all kinds of impurities in the oil and ensure the normal lubrication system.

Under normal circumstances, the car needs to be serviced every 5000 km.

2. The function of the air filter element is to filter the air before it enters the cylinder to remove the impurities, dust, sand and other foreign substances entrained in it. The cleaning and maintenance of the air cleaner depends on the environment in which it is used. Gasoline filters are generally replaced when driving to 20,000-25,000km.

3. The spark plug is a consumable part and should be replaced every 20,000km. In addition, brake fluid, transmission oil, battery, throttle valve, fuel injector, brake pad and other components belong to the test items during routine maintenance, and maintenance and maintenance are carried out according to the use of the product. (Photo by photo:.)

Pacific Automobile Network Yang Weilin).

There are ways to determine whether the car you bought is a new car: look at the odometer, check the production date of the tire, check the production date of the glass, etc.

1. Look at the odometer.

It cannot exceed 50 km. If you are afraid of adjusting the meter in the 4S shop, touch the exhaust pipe with your hands to see if there are any signs of blackening, which indicates that the car has traveled more than 50 kilometers. You can also pull out the dipstick to see if the oil is cloudy.

2. Check the production date of the tire.

There are four numbers connected to the tire, the first two digits indicate the number of weeks produced, i.e. the weeks of the year, and the last two digits are the year, e.g. 2018, which is 18. If it is 2518, it means that this tire was produced in the 25th week of 2018. Once you have determined the production date of the tire, check to see if it corresponds to the production date on the co-pilot nameplate.

3. Check the production date of the glass.

It cannot be later than the production date of the whole vehicle. In the lower corner of the glass, there are many English letters, and at the bottom, there are small dots and numbers. The dots represent the month and the number represents the year.

The small dot is in front of the number, indicating that it is the first half of the production, and subtracting the number of points with 7 is the production date of the first half of the year; The dot is followed by the number to indicate the second half of the year, so subtract the dots from 13 to get the month.

What to do during the run-in period of a new car:

1. Preheating of cold cars.

Before the new car is to be driven, it is necessary to preheat it first, and after starting the car, keep idling for 1 2 minutes, or start it again when the tachometer falls below 1000rpm, because the purpose of preheating the new car is to make the car's oil form a layer of "oil film" between the engine and various parts, which can play a lubricating role between various parts.

2. Shift gears in time.

Automatic transmission car, the new car does not involve the problem of shifting, and the manual transmission of the car, the new car in the process of driving, to change the appropriate gear in time, to prevent the occurrence of high-speed low-gear, low-gear high-speed problems.

3. Timely maintenance.

Before the new car leaves the factory, each car has a user manual, and the maintenance cycle is done in accordance with the maintenance cycle on the user manual, such as checking all aspects of the vehicle accessories, replacing the oil, oil filter, glass water, cleaning the car model sail and carefully loading the air conditioner, checking the tires, chassis system, etc.

Summary. Dear, glad to answer for you! How to buy a new car and check the car:

Online inquiry: Before buying a new car, you can search for the model through the Internet to understand the basic information of the vehicle**. At the same time, you can also view the ** and detailed parameters of the car, field trip:

In addition to online inquiries, field trips are also very necessary. You can go to a nearby car showroom or dealership to experience the exterior, interior, space, comfort and other aspects of the vehicle.

Dear, glad to answer for you! How to buy a new car and check the car: online inquiry:

Before buying a new car, you can search for the model through the Internet to understand the basic information of the vehicle**. At the same time, it is also possible to bury the dust to view the ** and detailed parameters of the car, field trips: in addition to online inquiries, field trips are also very necessary.

You can go to a nearby car showroom or dealership to experience the appearance, interior, space, comfort and other aspects of the vehicle.

What does this mean.

Kiss, this is a kind of identification of the original glass, is the vehicle identification**.

How to check the year of the car and its factory date.

Extended information: If you are uncertain about the vertical energy and quality of the vehicle, you can entrust a professional organization to conduct a vehicle inspection. These mechanized excavation structures will test the mechanical properties of the vehicle, the large system of the electronic tung section, the body structure and other aspects.

Dear, check the factory date of the car can look at the frame number, the frame number of each car is unique, and the production date of the car can be judged according to the frame number. The tenth letter of the frame number refers to the date of manufacture of the car.

Hello dear, I am happy to serve you: why did you check the car ** on the Internet after the car 4S shop knows? This may be because the car 4S shop has a cooperative relationship with the car manufacturer or sales channel, and can obtain real-time car ** information.

In addition, auto 4S stores can also monitor the market trend of competitors to understand the market trend of car liquids, so as to better formulate their own sales strategies. In addition, it is also possible that you left personal information when you inquired about the car**, and this information was shared with the car 4S shop. Thank you for your patience, the above is my reply, I hope it can help you, I wish you a happy life.