How to maintain the car paint without gloss?

The earliest is waxing, the waxing effect is the worst, and the car is gone after washing it twice and has to be redone. If it is not played well, there are still pieces of wax marks on the body, so although waxing is cheap, there are not many people who choose it now. In fact, the main function of these products is to form a protective layer on the car body, so that the direct contact between the car paint and the outside world can be isolated to avoid pollution and damage to the car paint.

The difference is only in the choice of materials and the process of operation, resulting in differences in effectiveness and maintenance time. Among them, the crystal plating is the best, and the maintenance time is also longer, if the maintenance is good, there is no problem for 2-3 years, of course, ** is also the highest. Sometimes there is a small touch in the car to wipe off the paint, and the plating on this side is gone, which is still a little distressing.

The difference between the sealing glaze and the coating is not very large, a little weaker than the crystal plating, and of course, it is much cheaper. It's enough for daily protection, but because it doesn't last as long as crystal plating, it will start to lose its luster in about 1 year. In fact, these car paint protection products are very good when they are first made, but if you want to always maintain the luster of the vehicle, you need to go for beauty regularly.

Now there are some coating sprays that can be bought back and operated by yourself, as long as the car is cleaned, the spray is sprayed on the car, and then dried with a cloth. Such coating products are definitely not as long as those made by beauty shops, and it is best to use them once every 3-4 months, but it is better to be cheaper and save time, which is still good.

The surface of the car body is properly maintained.

The car paint surface is not shiny, it can be waxed, and if the effect is not good, it can be glazed

The lacquer surface is waxed. Car waxing, as a traditional project of car beauty, the role of waxing is first of all waterproof, acid rainproof, due to the protection of car wax, the amount of water droplets attached to the body will be reduced, the effect is very obvious, can reach 50% to 90%; The second is to prevent high temperature and ultraviolet rays, the weather is getting hotter and hotter, the car is easy to drive or store outside all the year round due to the aging and fading of the car paint, and the film formed by waxing can reflect part of the light, effectively avoiding the aging of the car paint; The second is that car wax can be anti-static, and of course, it is also dust-proof. The friction between the car and the air generates static electricity when driving, and the car wax can effectively isolate the friction between the car body and the air and dust.

Less electrostatic cars naturally have less dust adsorption, and car wax can also play a role in glazing, making the car look newer and better.

1. The surface of the car paint is not luster: you can choose to go to the car repair shop to polish, the cost is relatively high, 2. You can also choose to polish the car yourself: first wipe the body clean with a wet towel.

3. Then pour some gloss locking agent on the sponge. 4. Then polish the body with a sponge, rub it evenly, and rub it slowly. 5. Finally, wipe the body with a clean towel, 6. You can also choose to repaint your car in the repair shop.

At this time, you should go to the shop to spray paint, so that the car can be more shiny, so that you can also give the car a simple maintenance, which is also a very good thing.

You should go to the 4S shop to do the remedy, because this is a technical job, you can't do it on your own, you should let a professional to apply your car film.

Polished. This is because polishing removes stains from the surface of the car paint and makes the car look shinier.

In fact, you can repaint the car or apply a film to restore the car to its previous appearance.

In fact, we can choose to wax the car, so that the car will not have much impact, and it is particularly beautiful.

You can go to a 4S shop or an auto repair center to apply film to the car, which can make the car look brand new.

Car paint has no luster and needs to be polished, it is recommended to go to a car beauty shop to do paint polishing to return to normal. At the same time, it is recommended that the owner carry out car paint maintenance, and there are many ways to maintain car paint, such as: waxing, sealing glaze, and coating.

The specific choice needs to be made according to your own economic conditions and actual situation.

After a long period of weathering, acid rain erosion, strong sunlight, sand, etc., the paint surface of the automobile body will gradually be rough and dull. The car paint should be regularly cared for, specifically from the following aspects:

1. Paint oxidation. Under the irradiation of the sun's ultraviolet rays, the paint film continuously evaporates oil into the air to protect itself. Over time, the oil content of the paint surface will be too dispersed.

The brightness and depth of the paint surface are greatly reduced, so that the paint surface slowly whitens, and serious oxidation can be treated by grinding and polishing.

2. Traffic "membrane". The car generates a strong electrostatic layer due to friction during driving. Static electricity has a strong ability to adsorb dust, oil and chemical dust, and forms a hard traffic film for a long time. It is very easy to cause oxidation and corrosion of the paint surface, and it can be treated with grinding and polishing.

3. Fading. Smoke and pollutants in the atmosphere are the main causes of fading and discoloration of car paint. Fading is different from oxidation, and when fading occurs, the paint will appear unevenly colored. Medium and mild fading can be treated by grinding and polishing, and in severe cases, it must be repainted.

4. Erosion. Erosion marks are faceted abrasion. Insects, bird droppings, tree sap, tar, and asphalt can all cause erosion. Only a very slight can be solved by grinding and polishing.

1) The treatment method of tart loss caused by natural oxidation is not serious or shallow scratches: the paint surface loss caused by the above reasons can usually be treated by polishing and grinding. 2) Severe natural oxidation or lens effect caused by loss of light

The paint surface has lost its matte due to the above reasons, and it is necessary to repaint.

Auto-save shilili

Determine the cause of the loss of matte in the paint.

1) Light loss caused by natural oxidation; There are no obvious scratches on the paint surface, and the paint spots are small when observed with a magnifying glass, which is mostly caused by redox reactions.

2) Light loss caused by shallow scratches; There are many shallow scratches on the paint surface, especially in a well-lit environment, such as when exposed to sunlight, which causes the paint gloss to be seriously affected.

3) Light loss caused by perspective effect; Carefully observe the paint surface with a magnifying glass, if you find that there are more spots on the paint surface, it means that the paint surface is seriously eroded by the lens effect, and the gloss is affected to varying degrees.

Slight scratches are polished, and then waxing is OK, if the years are too long to repair, you can only spray paint.

The most direct reason for the lack of gloss in the paint is that the varnish layer is destroyed. As a paint layer used to reflect light on the car body and increase the glitter for the car, once it is destroyed, the color paint layer or even the primer layer will be directly exposed to the air, and there is no clear paint layer to reflect the light, and other paint layers will naturally have no luster. For example, we often encounter some dirt such as bird droppings seen on the car, if it cannot be treated in time, then over time, it will corrode the varnish layer, even if it is cleaned later, the paint layer will not have the previous effect.

Secondly, if you don't wax the paint regularly, it will also cause the paint to lose its gloss. Just as the paint is the protective layer of the car body, the wax layer is also the protective layer of the car paint. Waxing the car can minimize the possibility of contact with acid rain or other corrosive substances, which can damage the varnish layer.

The best frequency of waxing is four times a year, before each season.

The car's paint is no longer glossy. You have to go to the four S shop first, clean it, polish it with polishing wax after cleaning, and re-spray the paint if it doesn't work, so that your car will be shiny.

It can be restored by waxing, polishing, glazing, coating, and crystal plating, all of which have their own advantages and disadvantages, and car owners can choose according to their own needs. Glazing is the most ideal of these 5 methods, and its principle is to apply enamel on the body to fill in the cracks on the paint surface and restore the luster of the paint.

If the car's paint is no longer glossy, how should it be remedied? I think if the loss in this period is not big, you can polish it to remedy it, if the polishing is not good, then you can only redo the lacquer.

People are more trouble-free, after buying a new car, just wash it with water, and I don't know that after a long time of protection, the paint will lose its luster. Car paint needs to be protected frequently, for example, if you wax it every six months or once a year, and then take care of it. I'll give you leather shoes, you often wipe them with water, don't you use shoe polish, will it also fog up, right?

When you get in the car, you should be diligent, maintain the car frequently, wax the car, and protect the paint.

The paint of the car is no longer shiny, so you can spray it fresh.

Clean the surface of the car, polish and wax.

Go to the beauty salon to polish and wax.

Polishing and waxing can be carried out, polishing is a method of removing scratches and rough uneven parts on the surface of the car paint through grinding wax and polishing machine, and polishing can grind off the aging paint film of the paint surface, so that the new paint film is produced and restored to brightness. After polishing, waxing or glazing can achieve better results.

Polishing process: 1. Wash the car and remove iron powder and impurities.

2. Inspect all paint surfaces to confirm the degree of defects such as scratches, oxide layers, acid rain spots, dust spots, and orange peels on the paint surface.

3. Cover the area that needs to be painted.

4. Grinding, grinding is the use of abrasives to solve the deep problems that affect the appearance of the paint surface, such as oxide layer, streaks, pollution, and fading.

5. Polishing, polishing is a process after grinding, which is different from the role of grinding. Grinding is to flatten the paint surface to remove deep pollution such as stripes and oxide layers; Polishing is to further smooth the paint surface after grinding, remove the residual stripes of grinding, and the moisturizing ingredients in the polishing agent penetrate deep into the paint surface to make the paint surface show a soft own luster. The polish can also be used alone to remove minor oxidation and dirt.

Waxing process: 1. Apply car wax.

1) Use a waxing sponge to dip an appropriate amount of wax into the wax, and evenly apply the wax in a small circle and rotation; The size of the circle is subject to the paint surface without omission in the circle, and each circle covers the previous circle 1 3, and the circle trajectory is in a straight line along the front and rear of the body.

2) Waxing sequence of the whole car: divide the paint surface into several parts, and grind the right half of the body in the order of right front hood - left front hood - right front fender - right front door - right rear fender - trunk lid, and grind the left half of the body in reverse order. Until all lacquer surfaces are waxed without missing a beat.

3) Evenly coat a thin layer of car wax on all paint surfaces, subject to the paint surface obviously covered with a layer of car wax, and the front and rear plastic bumpers of the painted should also be coated with wax.

Recovery methods: 1. Waxing: Waxing is the most traditional and economical method of car paint protection. The main function is to inhibit the oxidation of the car paint by external harmful components, anti-ultraviolet rays, and can improve the brightness of the car paint.

2. Sealing glaze: In addition to the role of wax, sealing glaze can increase the strength of the paint and prevent small scratches caused by wind and sand on the body.

For example, a simple car wash or waxing a car. The former can quickly remove stains from the car and make the car shiny as new, while the latter not only increases the gloss of the car body, but also better protects the paint, both of which are the most basic but important maintenance tasks of the car.

We know that many manufacturers will coat the car paint with a layer of "transparent film" also called "resin layer" before the car leaves the factory, one is to prevent the oxidation and discoloration of the car paint, the other is to prevent slight scratching, and the third is to improve the brightness of the car body. This function is equivalent to our beauty camera, but this belongs to the real "beauty camera".

In our daily cars, this layer of "beauty mask" will be thinned or even peeled off by external influences or over time, completely exposing the car paint to the air. In this way, it is easy to lead to "lesions" of the car paint. If left unattended, it is easy to cause rust on the body!

Brief treatment method: In fact, the newly purchased second-hand car paint maintenance method is very simple. Depending on the degree of paint wear, there are different items that need to be done.

Generally, second-hand cars that have been used for 3-5 years only need to lightly polish the original paint, and then seal and coat the paint surface.

What can you do if you want to do the best maintenance for your car for less money?

1. It's easier to wax yourself.

The first impression of the car's paint is very important. The car will not only make the car look extremely unaesthetically pleasing, but also make the car suffer great corrosion and damage if the car is not waxed in time.

It is recommended to use this car wax coating agent, so that you can enjoy the same car paint maintenance experience and say goodbye to the high maintenance cost of 4S shop. It is easy to make the paint surface reach the mirror state, so that the body is easy to clean and maintain, all kinds of dust and all kinds of dirt are only washed with water, and the surface of the paint can be restored and kept crystal clear, which is very practical.

2. Automotive interior coating.

As an important part of the driving environment, the car interior is very important for car owners. But sometimes, some places such as car cushions, center consoles, air conditioning vents, etc., are full of dust, making the interior look dull and seriously affecting the driving environment, at this time we should carry out a comprehensive cleaning of the car interior.

3. It is more convenient to wash the car at home.

As the saying goes: Buddha relies on gold, people rely on clothing, and cars have to rely on the body to have a longer face. But when you are out and about, when there is a lot of dust on the body, the car loses its luster.

Although waxing is the best choice at this time, frequent waxing can also ruin the car! So, you might as well wash your car more.