Welder Short Training School? Where to go for welder training courses?

The general training time of welder training is 2 months, and the training cost of welders in general welder schools is about 6,000 yuan, which includes the welding technology of all welders, such as the easier to master the hand welding, and then the second welding, argon arc welding, argon electric welding, etc., these technologies will be learned in the training school. 1.The arc of argon arc welding is stable, the heat is concentrated, the arc column temperature is high, the welding production efficiency is high, the heat affected zone is narrow, and the weldment stress, deformation and crack tendency of the weldment are small;

2.Argon arc welding is open arc welding, which is convenient for operation and observation;

3.The electrode loss is small, the arc length is easy to maintain, and there is no flux and coating layer during welding, so it is easy to realize mechanization and automation;

4.TIG welding can weld almost all metals, especially some refractory metals, easily oxidized metals, such as magnesium, titanium, molybdenum, zirconium, aluminum, etc. and their alloys;

5.It is not limited by the position of the weldment, and can be welded in all positions.

From the following aspects of inspection and comparison, qualifications, whether there is a school license approved by the first department.

Whether the equipment is complete and whether it is really used for practical training.

management, whether the safety management of campus guards is strict, students are civilized and polite, campus environmental hygiene, etc.

strength, the number of teachers, the level of education, practical experience, teaching level, etc.

Process, observe the order of the class, the state of the students, whether the students are doing the operation, and whether the operation process is standardized.

4.Compare the campus environment, teachers, facilities and equipment, practical courses, etc., I hope you will study in a good school and win a good future! If you are professional, you can choose to choose automotive new energy and intelligent networking major or computer graphic design if you like cars.

As a special type of work, welding is a very professional technology, mental and physical strength at the same time, therefore, if you want to engage in the welder industry, you must go through formal training and study, and study the relevant professional skills certificate before you can work. So, if you want to learn welding technology, it's better to learn?

If you want to learn welder technology, you must go through professional training, be guided by professional teachers, and constantly summarize experience through actual combat.

Therefore, the school offers a welder major, 0 basic learning for 2 months. Welding includes welding electrode arc welding, two welding welding, argon arc welding, argon electric welding, high-pressure vessel welding, aluminum welding and other professional welding technology courses, the school to build a professional welding training room, 70% training + 30% theory, teachers teach hands-on, to create professional skills elite, 0 foundation can also learn, in school can get a certificate, professional training room operation, graduation certificate employment, consumables during the study period free, so that students in a short period of time to master solid skills, the achievement of high-paying employment road.

If you choose an informal training institution, then the corresponding equipment and facilities are not professional, and the operation process does not meet the requirements of industry standards. If you can't learn the real technology, it is undoubtedly a waste of time and energy, so you must be careful in your choice.

Welding is a short-term major, as long as you choose a good school, you don't need to invest too much time, you can get a job after studying. Students, we must recognize a reality, it is basically difficult to learn welding by yourself. "You will see it at a glance, and you will waste it as soon as you do it" This is a common problem in learning welding.

Welding is a very professional profession, if you want to learn well, you must go through professional training and constantly summarize experience, and ordinary training institutions do not have the corresponding equipment and facilities and industry specifications, if you can't learn the real technology, it is undoubtedly a waste of time and energy.

1. Electric welding is a technology, the factory is based on welding actual products, an apprentice who has no welding technology at all, the value of the products welded in the factory may be thousands or even higher, once the welding is unqualified, the loss is very large, so the general enterprise is unwilling to accept no welding foundation, even if the recruitment into the factory is also a handyman, not let the welding at all.

2. The production of the factory is piecework, if the welder master welds the product while taking the apprentice, it will inevitably affect the welding speed and further affect the piecework wage, so the welder master is not willing to take the apprentice and is not willing to teach the apprentice sincerely, as the saying goes, the apprentice starves the master, so they will have reservations. There is no need to worry about studying in an electric welding school, the teacher will teach by hand, and spare no effort to teach what he has learned to his students, so that learning electric welding technology is more secure.

There are three types of welder training institutions, the main training is the local junior workers, the intermediate workers are very ordinary, and the safety supervision bureau, the main training of the welders of the safety supervision bureau is the entry of safety knowledge, and there is a high-pressure welder certificate of the quality supervision bureau, which has high requirements, so the training is more difficult and the salary is relatively high. Advanced welder training or high-pressure welder training is sufficient.

Common sense of welders: 1. Common welding methods (fusion welding; Pressure welding and brazing).

2. Manual arc welding, gas welding and gas cutting, argon arc welding, CO2 gas shielded welding.

3. The type of welding rod selection and storage, the type and use of welding equipment, and the form of welding joints.

4. The formation principle of welds.

5. Selection of welding position (flat welding, vertical welding, horizontal welding, vertical welding) and welding process parameters (welding current, arc voltage, welding polarity, welding speed, etc.), weld layout and weldment structure, gas welding process and cutting process, gas welding and gas cutting of commonly used metal materials, argon arc welding principle, equipment use and welding technology.

6. Welding deformation and stress generation and prevention methods.

According to the relevant departmental regulations, welders belong to special types of work, and the relevant laws and regulations on the welding industry also have clear provisions, all welders on the job must participate in training and complete the examination in the vocational skills training school, and obtain the welder special operation certificate before they can work.

Welding is a very professional profession, want to learn welding needs to go through professional training and continuous summary of experience, and ordinary training institutions do not have the corresponding equipment and facilities and industry specifications, if you can't learn the real technology, it is undoubtedly a waste of time and energy, it is too worthless. Therefore, if you want to learn electric welding well, it is recommended to study in a professional and well-known school, so you should visit and understand more field trips.

Different school systems have different fees. There are long-term classes and short-term classes, you can also customize privately, choose the right school system for you according to your own actual situation, if you are interested, you can call ** consultation.

It is recommended to learn welder technology to a professional welding training course, and the tuition fee for learning welder is related to the selected welder training school, learning content, and study duration.

The tuition fee for welder training is charged according to the school, the specific learning content, and the learning time, and the general welder training is 10 to 60 days. Including: manual arc welding, carbon dioxide gas shielded welding, argon arc welding, resistance welding, plasma cutting, gas welding (brazing), gas cutting, etc.

Generally speaking, learning electric welding should be based on the time of learning and the type of welding technology, such as general welding, argon arc welding training is relatively low, two welding, cellulose welding, etc.

Short-term training for welders, zero-based practical operation, and rapid employment.

Welding major: 90 class hours.

The course content covers: basic theoretical knowledge of CO2 welding, welding safety protection, arc striking skills, transportation method training, flat welding skills, flat fillet welding (single-layer welding, multi-layer multi-pass welding), vertical fillet welding, etc.

2.Electrode arc welding: 90 class hours.

The course content covers: basic theoretical knowledge of electrode arc welding, welding safety and protection, arc initiation skills, flat fillet welding (single-layer welding, multi-layer welding, multi-layer multi-pass welding), vertical fillet welding, etc.

3.TIG Welding Major: 90 class hours.

The course content covers: basic theoretical knowledge of argon arc welding, welding safety and protection, basic arc initiation skills training, flat wire feeding skills training, flat fillet welding skills training, vertical fillet welding, rocker fish scale welding skills training, air plasma cutting, etc.

4. Argon electric joint welding major: 210 class hours.

The course content covers: electric welding arc skills, argon arc welding basic skills training, electric welding flat welding skills, electric welding vertical welding skills, argon arc welding flat wire feeding skills training, pipe arc welding skills training, pipe ARG welding skills training, plate-to-board horizontal welding single-sided welding double-sided forming, argon electric joint welding of pipe and pipe full position, etc.

5.All-round intensive course in welding technology: 300 class hours.

The course content covers: manual welding + secondary welding + argon arc welding.

The welder major covers many courses such as understanding the precautions and safety protection of welding, manual arc welding, plasma cutting, arc welding, CO2 welding, argon arc welding, gas welding, gas cutting, etc.

The welder professional teacher has one-on-one on-site teaching, one-to-one on-site problem solving, one welding machine per person, all day and all hours of practical practice, all day materials are not limited, and each knowledge point is assessed and then studied in depth.

Regarding the tuition fee, students need to clarify the specific welding job type after arriving at the school, and choose different courses according to different types of work, so the corresponding tuition fee is also different. It is recommended to find out on the spot

Welding training is generally seven days, as long as you learn carefully, including theory and practice, you can basically learn, and you can get a welder certificate, although not too fine, the basic work with low requirements can still be competent.

Welder is a type of work that uses appropriate welding methods, reasonable welding processes, appropriate welding equipment, and uses fillers of the same mold material or different materials with the same mold as the base metal, or even does not use fillers, and uses heating or pressurization, or both heating and pressurization, to closely connect metal or non-metallic workpieces.

Responsibilities of welders: 1. Weld the products arranged by the supervisor every day.

2. Maintain and maintain the machine before and after the shift every day, and sort out the site for 5S.

3. Follow the MCG process standard for operation; Carry out quality inspection on the input parts to ensure the quality of the output assembly or sub-assembly; Report product defects to the section leader.

4. Report the failure of equipment and tools to the section chief; Responsible for the cleaning and lubrication of fixtures and tooling to ensure proper storage every day. <>

Welder technical training school generally refers to the formal, professional welder training school, the biggest feature of this kind of school is that there are many training courses and training equipment. For beginners, learning welding must first lay a good foundation, so the choice of school is quite important. For beginners, how to choose a technical training school for welders?

If you want to learn welders, no practical training is not possible, if a training institution has more theoretical courses, and less practical training courses, then eighty percent can not learn technology. Therefore, when looking for a welder school, you must find a school with many practical training courses, and you also need to look at the school's teaching arrangement, curriculum setting, and training time.

When choosing a welder training school, you can't just look at the advertisement, but also learn more about the qualifications, brand, scale and strength of the welder training school from the side. Big brands with legitimate qualifications are always more trustworthy, and the size and strength show that many people have chosen this school before you, and the vast majority of people have benefited from it.

Go to several welder training schools for field visits, and make comprehensive evaluations from environmental equipment, the number of students, teachers, employment cases, etc.

Welders go to professional schools to learn, with or without technology can be learned, from the basic training, generally set up point welding, electric welding, plate and board docking, pipe and tube butt welding training projects, in the welding method to focus on training flat welding, vertical welding, hanging welding, vertical welding and other welding alignment.

Most people will have questions about how much welder training is, how much does it cost, how much does it cost, whether it is expensive, etc., before choosing a training provider. Nowadays, due to the fierce competition in the industry, the training institutions on the market are scrambling to use various low-price, first-class and other marketing methods to recruit students, so there is no standard for the cost of domestic welder training tuition.

Generally speaking, learning electric welding should be based on the time of learning and the type of welding technology, such as general welding, argon arc welding training is relatively low, two welding, cellulose welding, etc.

Shandong Lanxiang Technician College was founded in 1984 and is a modern and comprehensive private vocational and technical college approved by the Ministry of Human Resources and Social Security. The school now offers a number of majors such as automobile inspection and maintenance, cooking and nutrition, CNC machine tool processing, welding technology, beauty salon, computer application and maintenance, construction machinery operation and maintenance, rail transit, etc., with more than 60 types of work. The combination of school-based education and short-term vocational skills training, and the multi-level running of schools by junior, intermediate and senior technicians and technicians stimulate the vitality of the diversified school-running mechanism and adapt to the learning needs of students with different academic qualifications, different ages and different basic skills.