How to cancel the alarm clock on the computer digital perpetual calendar?

1. Time setting:

a--- Date & Time Settings Move.

b--- Alarm switch on the hour has been added.

c--- Reduction of throttle lamp pattern change.

d--- Set the alarm settings to move.

Take the setting January 28, 2010 at 10:38 a.m. as an example).

Press the "A" key to flash "Year", press the "B" or "C" key to set it to "2010";

Press the "A" key again to flash the "Month", press the "B" or "C" key to set it to "1" month;

Press the "A" key again to flash the "Day", press the "B" or "C" key to set it to the "28th" day;

Press the "A" key again to flash "Time", press the "B" or "C" key to set it to "10" in the morning;

Press the "A" key again to flash "Points", press the "B" or "C" key to set it to "38" Points;

Press the "A" button again, the "second" flashes, press the "b" or "c" button, and the second starts from 00; (Note: This step is not displayed when there is no second digital tube.) )

Press the "A" key again to exit the time setting.

2. Setting the alarm setting:

Press the "D" key, enter the setting of the alarm, the position of the monthly digital tube displays the alarm serial number, the serial number flashes, press the "B" or "C" key, you can select a certain setting in the alarm 1 4;

When you press the "D" button again, it flashes, and press the "B" or "C" key to adjust it to the set value;

Then press the "D" key to flash, press the "B" or "C" key to adjust it to the set value;

Press the "D" button again, display the alarm status of "on" or "--" in the position of the digital tube and flash, press the "B" or "C" button to turn off or turn on the alarm, and then press the "D" button to exit the alarm setting.

Note: As long as 1 or more of the 4 alarms are set to on, the alarm indicator will be on.

When all alarms are off, the alarm indicator will be off.

3. Alarm setting on the hour:

In normal operation, press the "B" key once, and the hourly alarm indicator on the panel is "on" to indicate the hour.

The alarm is on, otherwise, the light is off.

Press first"Settings"key, if the specific time is also displayed, it means that the alarm clock is still there, pressing"Upward adjustment"key to toggle the alarm"It worked"/"Invalid"

Press and hold the "Settings" button for 3 seconds to enter the alarm modification and cancel the alarm.

I haven't figured it out either. Finally, unpack and unplug the ** line. ok

Preparation tool: CASIO computer.

The steps on how to cancel the alarm clock on the computer are as follows:

1. First of all, click the alarm button, that is, the first button in the second row on the calculator interface, to enter the alarm page.

2. At this time, the alarm time is displayed on the display, and then press the M subtraction key, that is, the downward adjustment key is missing, and the display screen is AL09.

3. Finally, press the AC button again, and then look at the upper left corner of the display, and the alarm sign will be gone.

Precautions for computer use:

1. When using the computer for the first time, please press the ON button certainly. Even if the computer is operating properly, the battery needs to be replaced at least once every three years. Expired batteries may leak, causing damage to the computer or not functioning properly.

Never put an expired battery inside the calculator.

2. The battery attached to the computer may lose a slight amount of power during early storage and transportation. It may require less battery life than the average one, and a little earlier is more likely to be replaced. <>

Summary. First, click the alarm button to enter the alarm page; Then press the [M-] key, which is the downward adjustment key; Finally, press the [AC] button to cancel the alarm function.

First, click the alarm button to enter the alarm page; Then press the [M-] key, which is the downward adjustment key; Finally, press the [AC] button to cancel the alarm function.

1. When typing a number, press the corresponding number key, if you press the wrong (CE) key to remove a value, and then re-enter the correct number. 2. After entering the number directly, press the multiplier sign to turn it into a surplus multiplier, and press the (=) key directly without entering the multiplier, which is the quadratic value of the number. 3. The root number ( ) key is to open the quadratic root by default, and only the scientific calculator can open the square root multiple times.

4. Press the (+ button to change the positive and negative values of the number. 5. Some standard models have digital storage function, which includes four buttons: MRC, Xunyun M-, M+, and MU.

The computer's alarm can't be canceled.

Finish. You can try it according to my method.

I clicked the alarm button and that's it.

Or wait for this alarm to go off.

At this time, the alarm time is displayed on the display, and then press the M- key, which is the downward button, and the display will display ---AL09 (alarm**). At this time, press the AC key on the stool base, and the alarm will be canceled. Look at the upper left corner of the display screen, and the alarm sign will be gone.

Still won't work. Open the calculator, on the key Yupei disk, you can see the withered shirt ** key, click the ** key, open the alarm clock setting page, then press the "M-" key, and finally press the AC key to defeat the alarm clock function, the alarm clock icon in the upper right corner of the display will disappear.

You can try this method.

Hello dear, 1. Adjust the alarm clock: press the "b" button, the alarm light will be on on the hour, and the time will be announced by voice at 8-21 o'clock every day; Press the "b" button again, and if the alarm light is not lit on the hour, it means that the alarm has been turned off on the hour. 2. Set the alarm clock:

Press the "C" key, display "A1" in the "Temperature" bit, "Hour" and "Minute" bit display "- Rock Loss-" means that there is no fixed trouble, if the display "** has the time of answering the body, it means that there is a fixed alarm, if you want to cancel the fixed alarm press the "B" key to convert it to" - then cancel the fixed alarm; There are 8 groups of fixed alarms, and the "temperature" bit displays "A1-A8", and the adjustment method of fixed alarms is the same as above; After the 8 groups of scheduled alarms are canceled, press the "C" key until the "Temperature" position displays "BB", and then press the "C key" to exit the alarm setting, and it can be displayed normally. Hope my reply can help you.