The simple way of doing tanks, the practice of handmade tanks

Hello friends, the approach to the tank is very complicated, not simple, it belongs to the heavy equipment, there are a lot of parts, and there are also a lot of key parts, our country can not produce it, it must be imported, this is a behemoth, its production process is very complicated, thank you.

The simple way to do it is very simple, the jelly beans are very simple, we can take some ingredients or small wood to make it, it's okay to make it with wood, look at the fingerprints, go straight to him, when you put it on, sit down, the tank should be able to carve wood, it's okay.

The simple approach of the tank, the tank can be said to be a very advanced kind of machinery, which can not be made simply, because it is required to be relatively fine and strong in many aspects.

The tank is simple, how can the tank be simple, can we do it ourselves? Tanks are **, we can't make them at home.

In fact, you can also use eggshells to make a tank, so my husband made me a tank with a big guest.

You can find simple ways to tank on the Internet, and there are many very simple and practical ways to do it on the Internet.

It is certainly very difficult to make a tank, nothing is simple or simple, but it is possible to understand the military. Just take a look at the books about the military.

The rhythm of the tank, for example, you can try to do the accounting in the division, it will be easier to do.

Tank simple practice, this tank, I haven't eaten it either, I don't know what kind of.

It takes four steps to make a handmade tank.

Step 1: Pinch four balls of about the same size with ultra-light clay and roll them into a column.

Step 2: Then glue the four cylinders together again. Glued to the wheels of the tank.

Thirdly: make a long strip out of green ultra-light clay and flatten it, which is the tracks of the tank. After doing a good job of wrapping the wheels of the tank at speed.

Step 4: Then make the turret of the tank, make the tank gun with a straw, wrap it with ultra-light clay, and then glue it on. So that the tank is ready.

The role and meaning of doing handicraft.

Clause. 1. Manual activities are a way to explore and seek knowledge, and they are activities that promote brain development.

Clause. Second, handicraft can bring children the exercise of fine motor ability, that is, the unity and coordination of thinking awareness and muscle movement. From the rough handmade silver chain to the fine manual progress process, so that the child's hands-on ability is gradually improved, and the child can control his movements more accurately by doing handiwork.

Clause. Third, it is not only the role of physiology, but also manual activities are more important for people's comprehensive ability and mental health. Crafting activities can cultivate children's observation, creativity and imagination.

The practice of making a tank out of cardboard is as follows:

1.Prepare a large cardboard and try to choose a thicker cardboard, which can better support the shape of the tank.

3.Use scissors and wide-tipped tape to cut the shape of the tank, glue the cardboard at the cut orange rim with tape, draw the wheels and other details of the tank according to the pattern, and then cut it according to the pattern.

4.After making the wheels, glue the wheel round letter under the tank and glue it tightly with tape.

5.To make a barrel, you can roll it into the shape of a barrel using a long piece of cardboard, then leave some gaps at the bottom of the barrel, and then stick the barrel to the top of the tank.

6.Adding a tower to the upper part of the tank made it possible to cut it into a square using cardboard and fold it into four corners and stick it above the barrel to form a tower.

7.Finally, the armor plates were added to the front of the tank and the tail support was added to the rear of the tank, so that the finished tank was more complete.

1. Take out 2 pieces of square colored paper, fold one on the opposite side, fold the two sides to the middle crease and then open it.

2. Fold the crease on both sides to the farthest point and then fold it in half, fold it along the edge to the imitation source, and fold the other side in the same way.

3. Fold a part of one end, and then fold the other end, and fold the extra two sides of the Bibi.

4. Take another piece of paper, fold it to two-thirds of the position and cut it, take out one-third of the paper, and fold the short side in half.

5. Fold the long side in half, then fold the short side, fold the two corners to the center, open and fold along the crease, and fold the two sides to the middle.

6. After folding one side of the crack book along the crease, cut a small hole with scissors, fold both sides up along the crease, pull both sides apart, and press the middle area.

7. Assemble it with the previously folded part, fold it in on both sides, and hold the bottom up with your hands.

8. The excess paper is rolled into a roll, cut to a suitable length and loaded into the top small mouth, and the tank is completed.

1. First draw four rings next to each other at the bottom of the interface, and draw four small circles in the middle of the four circles, and the size and distance of the four circles should be the same. Then the wheels of the car will be drawn. Such a tank can stand firmly.

2. Then draw a part of the body of the chariot on the top of the wheel, and draw the barrel on the top of the hull.

3. Fill in the key points again, draw windows, doors and other key points on the body of the tank, so that a tank car can be drawn. 4. Let's gradually paint the color below, first paint all the car body with army green, and paint the car wheel with dark gray and light gray.

5. In the end, paint the windows, doors, etc. with light yellow, and paint the barrel with dark gray, and the cool and handsome car is completed.

As follows:

Tools Raw Materials:

Computer Shenzhou. win7

Minecraft. 1. First select the gray squares and splice them into the tracks of the tank bottom chain, and there must be two rows of tracks.

2. Then make the bottom of the tank, to completely outline it, pay attention to the position of the cockpit to be vacant, and fill the other parts with black squares.

3. Then make the cockpit, which should be completely simulated, such as the steering wheel and other instruments must be made finely, and a person's seat must be made.

4. Finally, the top of the tank is processed, the most important thing is the turret, there must be two turrets to be able to rotate, and the top of the cantonal lid is also firmly to be completed, continue to take out the black stone and stick it on the outside of the track, and the whole tank is completed.

1. First choose the gray squares and connect them into the necessary tracks at the bottom of the tank, and there must be two rows of tracks.

2. Then make the bottom of the tank, to completely outline it, pay attention to the position of the cockpit to be vacant, and fill the other parts with black squares.

3. Then make the cockpit, which should be completely simulated, such as the square direction plate and other instruments must be made finely, and a person's seat must be made.

4. Finally, the top of the tank is processed, the most important thing is the turret, there must be two guns that can be rotated, and the tank cover on the top is also said to be completed.

It is recommended to add tank mods.