How to remove stains from corners that cannot be cleaned in the toilet

Supermarkets sell products that specialize in cleaning sewers.

How to remove the dirt in the bend of the toilet: hydrochloric acid and baking soda.

There is a thick dirt in the S bend inside the toilet, you should first add hydrochloric acid and toilet cleaner to the toilet, wait for a period of time, and then use the brush head to scrub the elbow, pay attention to the use of a special brush head, and the size of the brush head should be smaller than the size of the S bend, so that the brush head can reach the elbow.

In addition, if the stain is stubborn, you can sprinkle a little baking soda on the brush head, so that it can be cleaned by brushing several times repeatedly.

How to maintain the toilet

When the toilet bowl is in use, it is best not to put chlorine-containing detergents in its tank. For example, in the case of the wild acres where this cleaning agent is used, it will cause certain damage to the device inside the water tank, so that after a long time, there will be leakage, and the wall will be destroyed. So when using a cleaning product, be sure to look at its ingredients.

And when using the toilet, it is not possible to pour particularly hot water into the toilet, and the temperature of the water cannot exceed about 70 degrees, which will make the toilet burst.

Then, when using the toilet, do not throw some items into the toilet bowl that are relatively large or difficult to dissolve. For example, thick paper towels, bottles, diaper pads, etc., which will cause the toilet to clog.

And when we use the toilet, we should clean it regularly, so that the inside of the toilet can reach a certain degree of cleanliness. And when you usually use the toilet, you have to scrub it once after use, so that the inside of the toilet bowl will not breed certain bacteria.

1. To clean up the thick dirt in the toilet bend, you can first pour a certain amount of toilet cleaner and hydrochloric acid into the toilet, both products have a good defouling effect, and after waiting for a few hours, you can use a special cleaning brush to scrub the elbow, the size of the brush head should be smaller than the bend, in order to enter the elbow smoothly, you can also sprinkle baking soda on it, and you can clean it by brushing it several times.

2. In the process of using the toilet, you must not discard some items that are insoluble and early to be solved in the toilet, such as diapers, aunt towels and other items that can easily cause the problem of toilet blockage.

Hello dear! How to remove the dirt at the bottom of the toilet bowl 1, white vinegar and baking soda: first pour an appropriate amount of white vinegar and baking soda into the container, then stir the two evenly, and pour the dirt at the bottom of the toilet, wait for about 15 minutes, use the toilet brush to continuously wash the dirt position, and finally rinse it with water.

2. 84 disinfectant: If the user does not have baking soda at home, you can also use 84 disinfectant to remove it, as long as the 84 disinfectant is poured on the dirt part, and then closed early to let it be soaked overnight, and then use a toilet brush to brush it clean. 3. Soot:

It can also be removed by large and soot. Collect the soot left over from the family's cigarettes, sprinkle it on the dirt at the bottom of the toilet, wait for about an hour, then use a toilet brush to wash it, and finally rinse it with clean water.

Summary. 1. White vinegar and baking soda: first pour an appropriate amount of white vinegar and baking soda into the container, then stir the two evenly, and pour them into the dirt position at the bottom of the toilet, wait for about 15 minutes, use a toilet brush to continuously scrub the dirt position, and finally rinse it with water.

How to completely remove the dirt in the curve at the bottom of the toilet.

1. White vinegar and baking soda: first pour an appropriate amount of white vinegar and baking soda into the container, then stir the two evenly, and pour them into the dirt position at the bottom of the toilet, wait for about 15 minutes, use a toilet brush to continuously scrub the dirt position, and finally rinse it with water.

2. 84 disinfectant: If the user does not have baking soda at home, you can also use 84 disinfectant to remove it, as long as you pour the 84 disinfectant on the dirt part, let it be soaked overnight, and then use a toilet brush to scrub it clean.

Summary. Bleach cleaning: You can plug the water outlet hole with a cloth, pour hot water and then dissolve a little chlorine-based bleach. Let it sit for a while before scrubbing with a brush. The vinegar descaling method pours the mixed liquid of vinegar and water into the toilet, and after soaking for half a day, the scale will be brushed off.

How to completely remove the dirt in the curve at the bottom of the toilet.

Bleach cleaning: You can plug the water outlet hole with a cloth, pour hot water and then dissolve a little chlorine-based bleach. Let it sit for a while before scrubbing with a brush. The vinegar descaling method pours the mixed liquid of vinegar and water into the toilet, and after soaking for half a day, the scale will be brushed off.

Bleach cleaning: You can plug the water outlet hole with a cloth, pour hot water and then dissolve a little chlorine-based bleach. Let it sit for a while before scrubbing with a brush. The vinegar descaling method pours the mixed liquid of vinegar and water into the toilet, and after soaking for half a day, the scale will be brushed off.

Method 1: Manual cleaning.

It is necessary to disassemble the automobile water tank, and remove the scale with a scraper, a shovel, etc., although it can be descaled, but the efficiency is low, the labor intensity is large, it is not easy to remove it, and it is easy to cause secondary damage to the water tank.

Method 2: Limescale cleaner.

The water tank needs to be disassembled, and the removal is not complete, the odor is large, and the corrosiveness is strong, which is easy to cause the aging of the water tank and shorten its service life.

Method 3: Professional car water tank descaler.

Directly pour the special scale cleaning agent into the automobile water circulation system, let it soak, idle cycle or drive for 20-30 minutes, discharge the descaling agent inside the water tank and the system, add water and rinse it repeatedly, which can effectively remove scale, rust, mud and various harmful substances in the engine water circulation system.

Description: Although there is a way to clean up the scale, the owner should still pay attention to reducing the generation of scale, pay attention to the use of antifreeze, especially now that the summer is coming, do not use ordinary water to replace the antifreeze, because the antifreeze in addition to antifreeze, can also reduce the phenomenon of the water tank boiling, such as using ordinary water, can not avoid the boiling of the pot, not to mention, the minerals in the water will also accelerate the formation of scale.