IPTV boot authentication fails, but the network settings show what happens when the network connecti

Causes and solutions for boot authentication failures when the network set-top box is connected to the TV:

1. If the network set-top box is not connected to the network and the boot display authentication fails, enter the network setting interface of the set-top box, check the network connection, and reset the networking. You can also fix network connectivity issues by restarting your router or resetting your router.

2. If there is a problem with the system of the set-top box, which causes the authentication failure to occur at startup, you can restart the set-top box to solve the problem; If restarting multiple times does not work, you can restore the set-top box system.

Recently, a ban has been introduced to prohibit unaudited online broadcast control platforms from providing **** services, so some broadcast control platforms that fail to pass the review will stop serving, resulting in the inability of users to authenticate; In this case, you can try to install third-party network** software on the set-top box instead.

4. If none of the above methods can be solved, it is recommended to contact the after-sales service of the network set-top box for comprehensive testing and maintenance of the set-top box.

Solution: 1. You can try to change the network and then authenticate, such as using a mobile phone hotspot connection.

2. It may be the wired MAC address of the TV.

If there is a problem, you need to contact the after-sales service to solve it.

3. You can restore the TV to factory settings.

Certification.

Precautions for TV use:1、If the TV has no image,First check whether the power is turned on,Then determine whether the signal cable is plugged in tightly,Finally, confirm whether the TV is in standby mode。

2. If there is no sound on the TV, first check whether the volume is set to 0, then check whether the TV is on mute, and finally check whether the audio cable is plugged in tightly.

3. If there is a ghost in the picture, it may be that there is a signal problem and you need to wait for the operator to solve it, and the TV and other household appliances need to be scattered to avoid signal interference.

Data Expansion: Smart TVs.

It is based on Internet application technology, with an open operating system and chips, with an open application platform, which can realize two-way human-computer interaction function, integrating audio, entertainment, data and other functions to meet the diverse and personalized needs of users. Smart TVs need to be able to complete the decoding and display functions of traditional TVs, and can run operating systems and many applications, so chip design is difficult.

What's going on with the failure of digital TV boot authentication.

The area code is mainly used to identify the signal area where the digital TV is located, and the area code is only meaningful to radio and television, and there are the following 3 possibilities for the failure of digital TV boot authentication:

1. The set-top box used for digital TV has not opened digital TV services.

2. The signal line is not connected, and the area code is sent through the signal line.

3. The set-top box is faulty.

Extended information: Internet Protocol TV (also known as IPTV) is an intelligent terminal that connects to the broadband network through a set-top box or computer to realize digital TV, time-shifted TV, interactive TV and other services. The device is based on broadband high-speed IP network, with network resources as the main body, TV, personal computer and handheld devices as display terminals, changing the previous passive TV model, realizing the convenient way of TV on demand based on the network and watching and stopping.

In general, network TV can be divided into four forms according to the terminal, namely PC platform, TV (set-top box) platform, platform (network TV) and mobile phone platform (mobile network).

Watching network TV through a PC is the main way to watch network TV at present, because the relationship between the Internet and computers is the closest. Systems that are already in commercial operation basically fall into this category. The system solutions and products based on the PC platform have been relatively mature, and some industry standards have gradually formed, and the products and solutions of various manufacturers have good interoperability and substitution.

The TV does not use a network set-top box.

1. Check whether the wifi password is correct. Select the wifi name, press the "right button" of the remote control, and then select "Ignore this network", and then re-enter the password. 2. Turn on the DHCP function of the router.

If DHCP is turned off, the shouting chain TV box cannot automatically get the IP address. 3. Check whether the router restricts access to more terminals. If the router only allows the whitelist to be set to connect to the wifi, please add the MAC address of the TV box to the whitelist and then try to connect.

4. Check whether the TV box can be connected to other wifi (such as mobile phone hotspots): If it can be connected, please restart or reset the router with the destroyer; If you can't connect, please factory reset your TV box device and try to connect to wifi again.

Reason for the failure of the wireless network connection of the TV:

1. The distance between the TV and the router is too far, resulting in the TV not receiving the wifi signal, and generally moving the router closer to the TV can solve the problem.

2. The router's wireless network setting turns off the SSID broadcast, resulting in the TV not receiving the WiFi signal, generally turning on the router's SSID broadcast can solve the problem.

3. If there is a problem with other settings of the router or the TV cannot be connected to the wifi signal due to the failure of the router, you can generally restart the router or reset the router and then set the parameters of the router, and if necessary, you can replace the router for use, which has solved the problem.

4. If there is a problem with the system of the TV, resulting in the inability to receive wifi, the TV system can generally be restored to factory settings or the system can be upgraded to the latest version to solve the problem.

5. The hardware failure of the TV can not receive WiFi, such as the failure of the wireless network module, the failure of the WiFi antenna, the failure of the internal circuit or the motherboard and its parts, etc., it is recommended to contact the after-sales service of the TV for maintenance to solve the problem.

Hello! There may be several factors:

1. The router is too far away from the TV, and the wireless signal is weak, resulting in the TV not being connected, so it is best not to partition the wall within a straight line distance;

2、The wireless name and password cannot have Chinese characters and special characters,Otherwise, the TV may not be recognized;

3、The connection method of the router should be set to automatic connection,Otherwise, the TV may not be able to obtain IP and DNS。 Determine the method:You can directly use the mobile phone hotspot for testing,Mobile phone connection traffic,Turn on the hotspot function,Set a simple name and password,Then let the TV connect to the mobile phone hotspot,If you can't connect,It may be a problem with the TV itself,If you can connect it,You need to adjust the router。

You can do it in the way you want first, and then if you don't understand, you can learn it at the time.

Summary. Hello dear! We're happy to answer for you! 1. If there is a problem with the network setting of the TV, you can enter the network setting interface and try to re-set the wifi signal at home.

2. If there is a problem with the router settings or the router is faulty, you can restart the router to solve it, or restore the router to factory settings and reset the network parameters to solve the problem; If the router hardware is faulty, you need to contact the after-sales service for maintenance or replace the router to solve the problem. 3. Whether the network line and server of the network service provider are interrupted or faulty, and the router cannot connect to the network, in this case, the TV will inevitably be disconnected, and it is necessary to contact the network service provider to solve the network transmission problem first.

4、It may also be a TV system problem that causes the network to be abnormal,You can restart the TV to solve it,If necessary, you can enter the system setting interface,Restore the system of the TV to the factory setting state or upgrade to the latest version to solve it。 5. After the above problems are investigated, the TV still cannot be connected to the network normally, it may be the network module failure of the TV, the antenna failure, the internal circuit or the motherboard and other parts of the failure, etc., which need to be solved by contacting the after-sales service of the TV for comprehensive testing and maintenance.

What should I do if the TV shows that the network is abnormal, please check your network settings and whether the network access equipment is normal?

Hello dear! We're happy to answer for you! 1. If there is a problem with the network setting of the TV, you can enter the network setting interface and try to re-set the wifi signal at home.

2. If the router settings are troubled or caused by router failure, you can restart the router to solve the problem, or restore the router to factory settings and reset the network parameters to solve the problem; If the router hardware is faulty, you need to contact the after-sales service for maintenance or replace the router to solve the problem. 3. Whether the network line and server of the network service provider are interrupted or faulty, and the router cannot connect to the network, in this case, the TV will inevitably be disconnected, and it is necessary to contact the network service provider to solve the network transmission problem first. 4、It may also be a TV system problem that causes the network to be abnormal,You can restart the TV to solve it,If necessary, you can enter the system setting interface,Restore the system of the TV to the factory setting state or upgrade to the latest version to solve it。

5. After the above problems are investigated, the TV still cannot be connected to the network normally, it may be the network module failure of the TV, the antenna failure, the internal circuit or the failure of the motherboard and other parts of the bending parts, etc., which need to be solved by contacting the after-sales service of the TV for comprehensive testing and maintenance.

Hello dear! Do you have any questions?

Hello dear! If I help you, I hope to give a thumbs up in the case of your convenience, thank you! <>

<>Ask about custom messages].

<>Ask about custom messages].

If it is a wireless connection, you need to check the settings of the wireless connection, check the wireless connection settings is to check the connection settings of the router, if it is a wired connection, you need to check the cable TV connection cable connected to the TV, there may be a problem with the connection cable.

1.First of all, enter the set-top box settings page through the TV side to check whether the name of the connected router is the name of your router.

The login IP address of different brands of routers is not necessarily the same, you can check the IP address of the router bottom shell, and most of the IPs are generally OR .

3.Go to the router settings page--- go to Wireless Settings--- Basic Wireless Settings--- change the channel to 11 or 1.

4.Then save the router, restart the router, and then go to the TV side to enter the wireless settings page of the set-top box to disconnect the network again and set up the connection again.

If you haven't touched the relevant equipment and lines, there are only two reasons: 1. You owe money. 2. Failure of the transfer equipment in the community. If you're sure you don't owe money, leave it alone and you'll be fine for a while.

If you have touched the equipment or wiring, you check to see if there is any looseness. Plug and unplug and restart the modem.

Restart the router to connect.

The IPTV shows that the Internet connection failed, which may be the case of a weak wifi signal.

So you can restart the router and then reconnect your wifi and it will work normally.

In general, I think that network TV should be displayed on the Internet, and it can come out on the line, and I think in the case of the general situation.