How to solve the yellowing of matte tiles?

In many families, ceramic tiles will be chosen as the laying, not only because of their simplicity and elegance, but also because they are wear-resistant and easy to clean; But in the kitchen and bathroom, one is the smoke of the heavy ground, the other is the damp place, many tiles in the use of a period of time, there will be a phenomenon of tile yellowing, not only very affect the appearance, but also in the cleaning of headaches, is there any good way, can clean these dirt when it becomes easy? Here we have sorted out the tips for cleaning the yellowing of tiles, let's take a look.

1. Tile yellowing cleaning - gap treatment.

Yellowing of tiles to clean.

Yellowing of tiles to clean.

In the gaps of the tiles, you can first use a brush dipped in a little detergent to remove the dirt, and then brush a waterproof agent in the gaps, which can not only prevent water seepage but also prevent mold growth. It is worth mentioning that at present, many families use a large number of cleaning and disinfectants contain chemicals such as acids and alkalis that have a great impact on natural stone, which has an adverse reaction to the surface color and internal mineral composition of stone. What is especially serious is that most detergents must react on the surface of the stone for at least five minutes to be effective, but during this time the detergent is already destroying the stone, so the surface of the bathroom stone should be cleaned with a neutral pH cleaner.

Ceramic tiles will inevitably be polluted by greasy and other stains after a long time, especially the joints of white bricks, which are very easy to hide dirt and dirt. Therefore, in order to keep the tiles clean and not damage the porcelain surface, it is recommended that you use a multi-purpose stain remover to clean them. Especially for the cracks of the bricks, you should first use a brush to remove the stain, and then brush the waterproofing agent again, which can not only prevent water seepage, but also prevent the growth of mold.

Try it with pine perfume, there's no good way to do it.

Summary. Hello Kiss Floor tiles are reflective and yellowing is not cleaned 1, daily cleaning: daily cleaning can be cleaned with water and detergents, such as dish soap, soapy water, etc.

2. Use sulfuric acid or hydrochloric acid solution: Use sulfuric acid or hydrochloric acid solution, drop it on the brick surface and let it stand for a few minutes to wipe, if it is not very serious, wipe it several times with vinegar. 3. Scrub with salt and vinegar mixture

Take an appropriate amount of table salt, mix it into 6% salt water, and then add a small amount of vinegar to mix and scrub, and the tile can have a new look. 4. Use acidic cleaner: Acidic cleaner can remove limestone, cement stains, limescale and stubborn urine stains and metal oxide stains that are common in the toilet on the surface of the cleaning object.

Hello Kiss Floor tiles are reflective and yellowing is not cleaned 1, daily cleaning: daily cleaning can be cleaned with water and detergent, such as dish soap, soapy water, etc. 2. Use sulfuric acid or hydrochloric acid solution

Use sulfuric acid or hydrochloric acid solution for the mold cover, drop it on the brick surface and let it stand for a few minutes to wipe it, if it is not very serious, you can wipe it several times with vinegar. 3. Use salt and vinegar to mix and scrub: take an appropriate amount of salt on the dining table, mix it with 6% salt water, and then add a small amount of vinegar to mix and scrub, and the tiles can have a new look.

4. Use acidic cleaner: Acidic cleaner can remove limestone, cement stains, limescale and stubborn urine stains and metal oxide stains that are common in the toilet on the surface of the cleaning object.

Hello Hello maintenance precautions for floor tiles 1, the surface of the tile stains should be removed in time, and you can choose a suitable detergent to remove. However, due to the acid-base component of the spike may cause corrosion on the surface of the tile, it is not suitable for frequent use, and more cleaning agents with neutral pH value should be used. 2. The gaps of ceramic tiles need to be paid attention to when cleaning and maintaining.

After the tile paving is completed and the daily cleaning is completed, you can use a brush brush to brush a waterproof agent in the gaps, which can play a waterproof and mildew-proof role. Gaps that are often prone to stains can be applied to the joints of tiles with candles to prevent excessive stain adhesion in advance. 3. When there are slight scratches on the surface of the slab bricks, you can apply a little toothpaste on the scratches, wipe them repeatedly with a soft dry cloth, wipe off the scratches, and then apply floor wax, which can make the tiles as bright as new.

Matte bricks are easy to get dirty and difficult to clean every day.

Daily cleaning and maintenance of matt brick tiles:

1. Daily general stains of ceramic tiles can be cleaned with dish soap, soap, etc.

2. Use soap and a little ammonia and turpentine to clean the tiles to make the tiles more shiny.

3. The polished tile should be waxed regularly, and the time interval should be 2-3 months, such as: shield king antifouling care wax.

4. If there are black metal scratches on the brick surface, you can spray a little shield king descaler, wait for a minute or two, wipe it with a dry cloth to remove.

5. The gap between the bricks and the bricks can be removed from time to time with the shield king descaler, and then brush a layer of waterproof agent in the gap to prevent the growth of mold.

6. Tea, ink, coffee, beer, ice cream, grease and other pollutants are cleaned by Shield King Full Effect Decontamination King.

7. Cement scale, caulk scale, lime scale, rust and other decoration pollutants are cleaned by Dunwang Descaling King.

8. Use special detergents for paints, coatings and other pollutants, such as Tianna water.

9. The rust can be sprayed with the shield king, wait for 2-3 minutes, and then scrub it with a scouring pad to remove it.

10. All kinds of glue can be removed with banana water, pure banana water is a colorless, transparent and volatile liquid, with a strong banana smell, slightly soluble in water, soluble in various organic solvents, flammable, mainly used as a solvent and thinner for painting.