How to convert non positive coordinates in CAD to positive coordinates.

You can use the AutoCAD coordinate conversion command to change the coordinate system.

Corrections. Coordinate conversion under AutoCAD:

1: At the command line.

Enter UCS and then space to confirm;

2: Enter n as prompted and select New Coordinate System;

3: Enter 3 according to the prompts, this step is entered according to personal preference, and then the origin coordinates of the new coordinate system will be prompted;

4: Click the origin of the new coordinate system on the map;

5: Click the x-axis of the new coordinate system on the diagram;

6: Click the y-axis of the new coordinate system on the diagram;

7: At this time, the coordinate system of the graph has been rotated;

8: Enter plan;

9: According to the prompt, select [Current UCS], the default prompt is [Current UCS], so you don't need to enter any commands, just confirm with a blank field;

10: The coordinate conversion is complete.

Divide. Three axes. To the right is a positive x. To the left is negative x. Up is positive y. Down is negative y. Outward is positive z. Inward is negative z.

For example, the coordinates are 5,4

That is to say that 5 is the positive direction of x to 5, and 4 is the positive direction of y to 4

The intersection of these two points is the coordinate point of 5 and 4. If it is -5, -4, it is a negative direction.

Next to the toolbar on the CAD.

Gray blank space.

Right-click. Choose the first one: ACAD - UCS

Tick. The UCS toolbar appears.

on the UCS toolbar.

Clicking the second key (i.e., with a globe) will change the coordinates to horizontal and vertical.

Click on the fifth key (which has a blue rectangle).

Then select the line in the diagram that you want to change to due north and south.

The axes will rotate along the line.

You can give it a try.

Summary. Hello, according to your problem description, the solution provided to you here is as follows: CAD how to rotate the drawing and the coordinates are unchanged CAD set of drawings after the coordinates are unchanged:

1.Open the CAD software. 2.

After opening the CAD software, enter the user coordinate system UCS command from the CAD command line and press the enter key to confirm. 3.Click to select the origin of the new coordinate system.

4.Click to select a point on the x-axis of the CAD coordinate to determine the x-axis.

CAD how to rotate the drawing correctly and the coordinates do not change.

Hello, according to your problem description, the solution provided to you here is as follows: CAD how to rotate the drawing and the coordinates are unchanged after the CAD set of drawings is alignedMethod:1

Open the CAD software. 2.After opening the CAD software, enter the user coordinate system UCS command from the CAD command line and press the enter key to confirm.

3.Click to select the origin of the new coordinate system. 4.

Click to select a point on the x-axis of the CAD coordinate to determine the x-axis.

How to righten by rotation.

Hello, according to your problem description, the solution provided to you here is as follows: for example, the figure is inclined to a certain angle, first select it in CAD"Commonly used"—Modify the —Rotate command or enter RO. Select the shape you want to straighten, spacebar, and then specify the base point, and then a selectable subcommand appears, you can press the arrow key "Down Arrow" to select, select"Refer to the command or enter r directly.

Next, specify the first point and the second point of the drawing reference, in the example, you can click the first point and the second point of the line, specify the angle to 0 degrees, press enter, and the shape will be aligned.

Summary. 1. This operation can be achieved on any electronic drawing, as long as there are two known coordinate values.

2. Open CAD and select the drawing you want to modify. First of all, you need to confirm the original coordinates and need to exchange the coordinate values, and then mark the positions of the 3 points after conversion with circles on the drawing, and connect them with the original corresponding points;

3. Select the [Modify] - [3D Operation] - [Alignment] command in the menu bar;

4. Select all objects and align them in pairs according to the source point and corresponding point to be converted; Once aligned, you can get the sheet after the successful conversion of the coordinate system.

How to convert the coordinates of the CAD open and the coordinates on the drawing are different.

Hello, please follow the steps below.

1.Open the general view, find the location of the sheet you want to annotate the coordinates, and hide the other layers. 2.

Hide unnecessary layers. 3.Draw the grid line according to the base plan.

4.At the desired axis intersection point, click on the coordinate annotation on the left side of the CAD.

It's my pleasure to help you, and I hope I'll be helpful to you

I don't understand, thank you.

1. This operation can be achieved on any electronic drawing, as long as there are two known coordinate values. 2. Open CAD and select the drawing you want to modify. First of all, you need to confirm the original coordinates and need to exchange the coordinate values, and then mark the positions of the 3 points after conversion with circles on the drawing, and connect them with the original corresponding points; 3. Select the [Modify] - [3D Operation] - [Alignment] command in the menu bar; 4. Select all objects and align them in pairs according to the source point and corresponding point to be converted; Once aligned, you can get the sheet after the successful conversion of the coordinate system.

Hello, so you can read?

I've connected all three points correspondingly, and I haven't done it yet.

Thank you. Restart the software and try.

The three points are connected correspondingly, and then the modification is carried out, and the 3D mode is not known to operate.

Align command. Okay, try it tomorrow, thanks.

It's my pleasure to help you, and I hope I'll be helpful to you

1. Open the drawings you need to convert, take a non-positioning floor plan as an example, and do the following.

2. Mark the coordinates you want to convert on paper or any tool, preferably diagonally, and do the following.

3. Draw a straight line where these two points intersect with a straight line on the drawing, and mark the coordinates to perform the following operations.

4. Enter the al command in AD--- select the object, press enter --- select the first source point ,-- the first target point (the source point is the meaning of the starting point, and the target point is the position you want to move to. Do the following.

5. Select the second source point,-- the second target point, press Enter, a dialog box will pop up (be sure to select "Yes"), and then press Enter.

6. After selecting Yes, you will find that Sun Chao's previous drawings are all offset to Li You's designated point (the diagonal white straight line in the middle is the auxiliary tool line segment used for the transition during the conversion, and the red circle is the coordinates at that time.) Do the following.

1. Start the installed CAD software.

2. Enter "UCS" in the command bar and press the Enter key to confirm.

3. Select the coordinate system inside, such as the z-axis (za).

4. Prompt to specify a new origin, and specify a new origin.

5. Then specify the z-axis.

6. After specifying, it will be converted to the new coordinate system.

On the command line, after entering n, the : will appear

Specify the origin of the new UCS or [Z-axis(za) three-point(3) object(ob) face(f) view(v) x y z] <0,0,0>

You can enter x or y or z to get a Gaussian Cartesian coordinate system. You can give it a try.

Step: Rotate the Z axis 90 degrees and then rotate the X on it.

Command: ucs

Current UCS Name: *World*

Enter the options. New(n) Move(m) Quadrature (g) Previous (p) Restore (r) Save (s) Delete (d) Apply (a) ?World (w)].

World: z

Specifies the angle of rotation about the z-axis <90>:

Command: Command:

Command: ucs

Current UCS Name: No Name

Enter the options. New(n) Move(m) Quadrature (g) Previous (p) Restore (r) Save (s) Delete (d) Apply (a) ?World (w)].

World: x

Specify the angle of rotation around the x-axis <90>: I did it above 90, I hope it can help you. If there is something wrong, I want you to advise.

Here's how:Operating Equipment: Dell laptops.

Operating system: win10

Operating procedure: CAD2017

2. Open CAD, enter the program to load the command "ap", and press Enter.

3. Enter the program loading menu, find the decompressed file, select - click to load - turn off the dialogue light.

4. Enter the command: "zbbz" and press enter.

5. Then select the current coordinate system on the left.

Then click OK Parameters.

5. Then you can mark the coordinate points.

Summary. 4. At this time, in addition to the first coordinate point, find any other coordinate point, here (0, 65050) as an example. 5. Then use the way of inputting coordinate points in CAD to draw a straight line from (0,0) coordinates to (0,65050), consult the record · on 2022-08-06

2. Browse to the location of the drawing that needs to adjust the coordinates, select it and click to open. 3. Find any coordinate point, take (0,0) as an example, you can see that the coordinates on the drawing are not consistent with the coordinates in the software.

4. At this time, in addition to the first coordinate point, find any other coordinate point, here (0, 65050) as an example. 5. Then use the way of entering coordinate points in CAD to draw a straight line from (0,0) coordinates to (0,65050), 6. Select all the original drawings, enter AL, confirm, and enter the "alignment" operation at this time. 7. At this time, the coordinate points on the original figure correspond to the two ends of the straight line just drawn.

At this time, you can see that the coordinates on the original drawing are consistent with the coordinates of CAD. I hope you can be satisfied, give a thumbs up, and wish you a happy life