How to check if your home s broadband has been stolen by others

You can check whether someone is secretly surfing the network through the router management interface, and the steps are as follows:

Materials required: Any browser on your computer.

First, find the manual of the router and open the router management address marked on the manual under the instruction note.

Second, open any browser.

3. Make a note of the router address before entering it in the address bar.

4. Enter the router administrator password and click "Login".

5. At this time, click "Connect Device Management" to see if there is a device that is not your home, and click "Disable" on the right side of the device to kick this device out, and it is permanently impossible to connect again.

Hello! If you don't use a wireless router, your password will not be stolen by others, if your password is stolen on your line, you will prompt error 691 when you connect to broadband, and you can't connect to broadband.

Online neighbors can find out the IP address of the other party's Shenhuai jujube. (But Mingsun Yi went to look at the other party's IP, if the mantissa difference with his IP was less than 10 digits, it basically belonged to the same account network.) )

Method 2: Install 360 Security Guard, the security protection is fully enabled, and the IP conflict (attack) will be displayed if it conflicts with the IP address. Check with the network operator in the name of your account.

Create a new account name (login ID) and password. Or stop surfing the Internet for a few days, or in a few days without Internet access, and then check your usage records from the operator, of course, the longer the network is down, the better, so as not to let the other party not make their efforts go to waste.

Method 3: You can call Unicom or China Telecom's service**, select manual service, and let customer service help you check the nearest link time. If you don't connect to the splitting room when you connect, it's someone stolen. You can directly ask customer service to help you change your broadband password.

If the facts are conclusive, legal proceedings can be taken to protect rights.

The steps to check whether the wireless network is being used by others are as follows:

1. Enter on the browser address and enter the username and password to log in.

2. Log in to the router and click - Wireless Settings on the left side as shown below.

3. Click the host status button under Wireless Settings.

4. Check what the number of hosts is, and compare them to know whether they are used.

Hello! Open the browser, enter [, click [Enter], select [Continue to access the web version], enter the wifi password, click [OK], find the [Device Management] icon, and you can see all the devices that are using the network on the right side.

Online neighbors can find out the IP address of the other party. (You can take a look at the other party's IP, if the mantissa difference with your own IP is less than 10 digits, it basically belongs to the same account network.) )

If the facts are conclusive, legal proceedings can be taken to protect rights.

The next P2P terminator can automatically detect how many of your network users there are, and the IP will be displayed on it, and then you can directly cut him off, if your route has a wireless function, you can enter the settings in the route, and turn off the wireless.

Hello, if your home is connected to a LAN with a router, you can log in and see all the computers that use the router.

360, PC Manager has this thing in his toolbox! 360 is the bedroom brother, and PC Manager is a wireless security assistant.

Take a look at 360, there is a function of anti-rub netting on it, in the gadget.

The next 360 Network Traffic Monitor knows everything about upload traffic and downflow traffic at a glance.

The next P2P Terminator is much easier to use than 360, check your network status, and limit his internet speed.

It depends:

If it is a broadband that uses a cat to dial up the Internet directly, it is generally impossible to be used by others;

If you don't use a wireless router, your broadband won't be used by anyone else unless you give your consent to someone pull a cable from your router.

Use a wireless router, but there is no broadband account information set in the wireless router, others can connect to your wireless router, but cannot share the Internet with you;

With a wireless router, the router has broadband account information set up, so that others can connect to your wireless router and share the Internet with you; The specific judgment method is to enter the IP address of the router in the browser address bar, log in to the router status viewing interface, and check the wireless network connection status. Encrypt the wireless network, use the WPA key, and enable the MAC address filtering function of the wireless router to prevent the broadband from being shared.

There are two ways to check whether the wireless network has been stolen, and the specific steps are as follows:

One. According to the network test method:

If you don't know that your Wi-Fi is slow, it's a sign that your Wi-Fi has been stolen.

If you still lose your Wi-Fi at every turn, it means that your WiFi may have been stolen.

Check your router to see if it's your own router. Look at the indicator light first, there are power lights, network connection lights, and wireless connection lights on the router. Look at whether the wireless lights are on, if they don't and all the computers in the house can't access the Internet, then it's certain that no one is stealing it.

That is the problem of your own network, hurry up to check whether there is a problem with your network, or call ** to Telecom 10000 to send someone to check and repair.

Two. According to the router query method:

Enter this address in the address bar of your browser to view the wireless router's management interface.

In "Wireless Settings", click on "Host Status" where you can see all the hosts of all computers that are wirelessly connected to your wireless router, and if you also see hosts other than the ones you are using. That means someone is using your wifi.

It seems that logging into your router's home page can see which hosts are connected to your router.

You can log in to the router and see the list of customers, which shows the address of the computer connected to your router, etc., in fact, you can manually add the SSID number of your wireless router directly to the wireless connection of your laptop, without having to search every time. Then set the router to disable the SSID from broadcasting, so that others will not search for your SSID name and there will be no way to connect to your route.

In the 360 Security Guard Traffic Firewall Anti-Rub Network, everything can be done.

It prevents others from stealing your network.

Fake, fake, fake, fake, Qinyuan, spring, Changsha, south convenient,