What s going on with reversing into the warehouse and always pressing the line on the left???

1. Everyone's seat position and height are inconsistent, and the coach's teaching point is greatly discounted on this basis;

2. The timing of hitting the steering wheel is inconsistent with the speed of the body.

For novices, you have to control the clutch, depress the speed, the speed is fast, press the clutch or lightly brake, feel that if you slow down, you will stop, relax the clutch; All in all, as long as you don't stop, slow words are the first word.

After killing the steering wheel, look in the rearview mirror and observe the distance between the corner of the garage and the extension of the body through the rearview mirror.

If this distance is too small, how can you go back in the direction? If the distance is too large, how can you go back in the direction? According to the first picture, think in your mind, figure it out, and then practice to adjust.

When you feel that the body is right, go back to the right direction and adjust the distance between the two sides: which side is wider and which way to play; Hit the direction, remember to go back to the right direction. You can imagine how to adjust the direction when you are riding a bicycle and going backwards.

Take the right reverse library as an example, the car should be at the starting point and the distance between the left side line of the full meter, the direction wheel should be positive, the body should be parallel to the left side line, when reversing backwards, the bottom edge of the left mirror is taken as a reference, when the two coincide, the right direction is killed. It is important to see this starting point, and this point is the best time to play the direction.

It's the left side that comes in, and the lift goes to the left side to play the steering wheel. If the left side is narrow, delay hitting the steering wheel to the left; If you come in from the right, delay the steering wheel to the right; If the left side is narrow, go to the right side to play the steering wheel.

Left backward fall: The method is similar to the right backward fall, the difference is that the left turn back (here you can stick your head directly out of the window and look back at the extension of the body) and see the 1,6 strokes overlap 10-20cm before the direction to the left to the bottom. Keep the No. 2 lever visible from the middle of the triangle glass in the rear window, and turn back a little if you can't see it.

Right side of the reverse library steering wheel formula:

Preparation: One step on the clutch, two on one gear, slowly lift the clutch to start.

1. Reversing straight from the right starting point, when the two reference pillars of the right window line of sight coincide, the steering wheel is killed to the right first (2 circles);

2. Hold the door handrail with the left hand, hold the steering wheel with the right hand, look at the back of the car with the head out of the left window, and when the No. 2 rod (middle bar) is just seen on the left rear side of the body, the steering wheel is back to the left for 1 turn;

3. When the body is parallel to the garage, the steering wheel turns to the left for 1 turn, so that the body is reversed into the garage. By observing the left rearview mirror, the distance of the parking space is judged, and the foot brake is controlled to stop.

Hello, I have seen your question and am sorting out the answer, please wait a while

When the reversing corner appears, the direction is late.

Reasons for reversing into the warehouse and pressing the left sideline: 1. The direction of the reversing process is late, which leads to the overall left side of the vehicle, and it is too late to find that the side of the warehouse is too late. It is recommended that the direction is not late.

2. When reversing, the steering wheel plays too few laps, and the front wheels do not have enough angle to reverse, which will cause the vehicle to be diagonally inserted to the left rear, and Lu Meng will also press the left side of the garage. The steering wheel should hit the correct number of laps.

3. The direction is too early. When the lower edge of the rearview mirror has not coincided with the stop line, it begins to reverse in the direction of the left full direction, which is easy to cause the left rear wheel to press the left corner. Don't hit the direction too early.

4. Keep hitting the left in the direction of death. Because before reversing into the garage, it is necessary to chase the distance between the line (the distance between the body and the edge of the road), but it is not always accurate. When starting to reverse in the direction of the left kill, you need to observe the relationship between the left rearview mirror rear wheel and the library angle, if the distance is less than 30cm (the mirror is less than 2 fingers), you need to open the steering wheel to open this distance, if you have been left to kill the direction, it will press the library angle line.

You can't go straight to the left with the bridge and kill the direction.

Everyone's seat position, height is inconsistent, and the coach teaches the emphasis based on this large discount. When the car is late, the car pulls too much to the right and is too far away from the left, so that the head of the car out of the warehouse will press the outer line. The method of correction is as follows:

When leaving the garage, you find the width of the left side and adjust the direction slightly to the left, try to keep the car straight, and fill the steering wheel to the left after the rear wheel is close to the dotted line out of the warehouse.

The starting point of the right garage is too far from the edge line of the left reservoir area, the starting point of the steering wheel to the right is too early, there is no point of the starting point to hit the direction, the 30 cm distance of the reverse car into the warehouse is wrong, the direction is adjusted too late or the speed is too fast, the steering wheel is adjusted too slowly, and it is too late to correct the direction is the reason for the right line of reversing into the warehouse.

In fact, the problem lies in the basic skills, and the sitting posture must be correct, otherwise it will directly lead to deviations in the viewpoint. The correct sitting position is to have the steering wheel about a fist away from the chest, and the soles of the feet can easily press the pedals.

Before reversing, observe the surrounding environment for obstacles, control the speed of the vehicle during reversing, and pay attention to the surroundings of the vehicle. Adjust the distance between the body and the sideline, the distance between the body and the roadside line before warehousing is appropriate to 2 meters, the distance is too small, and it is easy to cause the front line distance to be too large when entering the warehouse in the direction of death, and there will be difficulties in warehousing, and even the situation that can not be stored.

Suppress the speed, learn to use the method of pressing the clutch pedal to control the speed, the speed is fast to press the clutch pedal to reduce the speed, the car is about to stop to relax the pedal, through repeated practice can feel the speed of the car is completely determined by the clutch pedal The ideal state of pressing the clutch The speed is extremely slow, but it will not stop. (Photo by Chen Jie 2).

The reason for reversing into the warehouse and pressing the right side line may be that the time to adjust the direction is wrong or the body is not right.

1. The time to adjust the direction is wrong.

1. The first or second time to kill the steering wheel (1 and a half circles to the right) is too early.

2. It's too late to get the steering wheel right for the first time.

3. There is no point in the direction of the starting point.

4. The steering wheel is adjusted too slowly or the speed is too fast.

Solution: Adjust the time of playing the steering wheel according to the actual situation.

Second, the body is not right.

1. The body was not corrected in time after storage.

2. Misjudgment of the 30 cm distance between reversing and storage.

3. The starting point of the right reservoir is too far away from the edge of the left reservoir area.

Solution: Adjust the position of the body according to the situation.

The correct steps for reversing into storage:

1. Correct the direction.

Hang in first gear, drive to the test area at low speed, and make the body away from the yellow line at the edge of the library.

2. Drive at low speed after parking.

Stop when the shoulder line coincides with the control line. After stopping for more than 3 seconds, drive at a low speed in reverse gear.

3. Hit the steering wheel and make adjustments.

When the lower edge of the left mirror coincides with the control line, the steering wheel quickly fills to the right. Observe the right rearview mirror, and adjust the storage according to the distance between the body and the left front corner line of the storage area: when it is greater than 30cm, hit the steering wheel to the right; When it is less than 30cm, turn the steering wheel to the left. Prudence.

Fourth, the steering wheel back to the center and adjust the distance between the rear of the car and the yellow line in the reservoir area.

When the body is about to be parallel to the sideline of the storage position, the steering wheel returns to the left; You can also observe the left rearview mirror, and when the bottom corner of the left library appears in the rearview mirror, return to the right direction. Observe the left rearview mirror, and stop when the lower edge of the left rearview mirror covers the horizontal line of the left front of the reservoir area. The distance between the rear of the control car and the yellow line in the Jingku area of the barricade is about 35cm.

5. Exit the warehouse and drive to the control line.

After stopping for more than 3 seconds, hang a gear out of the warehouse and observe the left rearview mirror. When the left rear wheel is level with the front corner of the storage position, quickly fill the steering wheel to the left. Drive to the control line and stop when the shoulder line coincides with the control line.

Sixth, the town again lead to hang reverse gear, low-speed driving.

After stopping for more than 3 seconds, drive at a low speed in reverse gear. Observe the distance between the body and the left front corner line of the storage area through the rearview mirror, and adjust the storage. When it is greater than 30cm, hit the steering wheel to the left; When it is less than 30cm, hit the steering wheel to the right.

Seventh, back to the right. When the body is about to be parallel to the edge of the storage position, the steering wheel is right. Observe the left rearview mirror, and stop when the lower edge of the left rearview mirror covers the horizontal line of the left front of the reservoir area.

8. Delivery. After stopping for more than 3 seconds, hang a gear out of the warehouse. When the hood coincides with the yellow line in the storage area, turn the steering wheel to the right and drive out of the test area.