How to choose a lightning protection socket? What is the difference between lightning protection soc

The principle of lightning protection socket is to use a transient voltage absorber such as a lightning arrester or varistor and between the input lines, which usually behaves as an infinite impedance; When the transient voltage occurs, the impedance of the device decreases rapidly, and the transient energy is transferred to protect the internal electrical equipment.

Benefits of lightning protection sockets.

The lightning protection socket is suitable for the overvoltage protection of the final power supply at the equipment end.

The lightning protection socket has low residual voltage and large flow capacity.

All-round protection of common mode and differential mode.

Energy-saving, eco-friendly, can be applied to 16 different plugs.

The non-rack-mounted lightning protection socket has a built-in 10A overload protector, which has the function of short-circuit protection, and will not cause fire due to overload.

Non-rackmount lightning protection receptacles have a protective flap design to prevent accidental electric shock.

Precautions for using lightning protection sockets:

1. The load power of the lightning protection socket cannot exceed the rated power of the lightning protection socket.

2. The grounding terminal of the lightning protection socket is connected with the E end of the plug ground.

3. When the ground wire end of the socket connected to the lightning protection socket meets the requirements, the plug of the lightning protection socket can be inserted directly; Otherwise, the grounding terminal of the lightning protection socket must be connected to the ground network before it can be used. In order to achieve better lightning protection effect, it is recommended to reliably connect the grounding terminal of the lightning protection socket with the ground grid.

4. During the use of the lightning protection socket, it should be regularly tested and checked to see if the indicator is in normal working condition.

Friends, there are many types of lightning, and it is impossible to avoid all of them, but the use of them can reduce and reduce the degree of damage.

Please pay attention to the opinion of beliefch.

The lightning protection socket is not seen, but the lightning protection socket extension plate is a common product. As the final stage of the power supply, the fine-level lightning protection. Note that it is granular. In other words, the front of the electrical socket - i.e. the power supply in the home and the floor (or room) are equipped with energy-level arresters.

The fine-level lightning protection circuit at the end of the power supply is a comprehensive circuit, which has both energy level bypass and voltage clamping, and the coordination time of the two is well controlled. This technical requirement is more stringent. General copycat products can be voltage clamping to protect the household, generally with transient diodes or Mitsubishi's inert gas diodes protection.

The effect is not bad. **Also low.

It is suggested that if it is a private house, it is recommended to add leakage protection after adding a domestic low-cost lightning protector in the main switch box, and when the arrester acts, cut off the power supply of the whole house at the same time, the effect is very good. You don't have to spend money to buy lightning sockets.

The differences between them are as follows:

1. The functions are different.

The lightning protection socket has a good lightning protection function, which can well absorb the power surge pulse from the power supply system, so as to ensure the safe use of electrical appliances in harsh environments. The lightning protection socket can quickly absorb the lightning and surge pulses of the power supply system.

The ordinary socket is a seat that can be inserted into one or more circuit wiring, which can be inserted into various wiring, and the ordinary socket can be plugged into as long as it meets the demand for power, and there is no lightning protection function, so it cannot protect household appliances when thundering.

2. The principle is different.

The working principle of the lightning protection socket is to use a lightning arrester or varistor, and install it between the input lines, so that an infinite impedance can be formed, and when the instantaneous voltage occurs, its resistance will be rapidly reduced, so as to maintain the effect of internal electrical equipment. Ordinary sockets do not.

3. The characteristics are different.

Compared with ordinary sockets, it has all-round protection of common mode and differential mode, so the use of it can also be used for some equipment end final power supply to play overvoltage protection, and most importantly, to prevent accidental electric shock.

The lightning protection socket has the function of lightning protection, effectively absorbs the surge pulse from the power supply system, ensures the safe use of electrical appliances in harsh environments and thunder-prone areas, and the lightning protection socket quickly absorbs the lightning and surge pulses of the power supply system to reduce the probability of electrical appliances being damaged by lightning in the lightning environment.

An ordinary socket is a socket that can be plugged into one or more circuits, which can be plugged into various wires and connected with other circuits. Ordinary sockets only meet the needs of power-on, and there is no lightning protection function, which cannot protect household appliances in the season of multiple lightning or when the current is unstable.

The difference between lightning protection socket and ordinary socket: principle.

The working principle of the lightning protection socket is to use a transient voltage absorber such as a lightning arrester or varistor to be installed between the input lines to form an infinite impedance, and when the instantaneous voltage occurs, the resistor is rapidly reduced, and the transient ability is transferred, so as to achieve the effect of protecting the internal electrical equipment.

The difference between lightning protection socket and ordinary socket: features.

The lightning protection socket has a fail-safe circuit such as temperature control and over-current, which does not affect the normal operation of the line;

The lightning protection socket has a multi-purpose standard jack, which can meet the lightning protection needs of multiple different electrical equipment at the same time;

The lightning protection socket is energy-saving and environmentally friendly, and can be applied to 16 different plugs;

Compared with ordinary sockets, the lightning protection socket has all-round protection of common mode and differential mode, and it is suitable for the overvoltage protection of the final power supply at the equipment end, which can prevent accidental electric shock.

Hello: I am Aomeilan power engineer (track socket), about lightning protection socket and ordinary socket, the functional difference is that after the power line is struck by lightning, the electrical appliances under the power socket power may be burned out, the lightning protection socket will be powered off for a short time, the lightning isolation, protect the electrical appliances, the function is not much investment in cost, if you live outside the city, the residence is high, consider using the lightning protection socket, the wires in the city are basically underground, the possibility of lightning strikes is very small! Optional or not.

Lightning protection sockets, as the name suggests, are for lightning protection. In the frequent season of lightning, considering the safety issues, many families will choose lightning protection sockets when decorating, so what is lightning protection sockets? Do lightning protection sockets work

Below we will answer them one by one, hoping to be able to help you.

The lightning protection lead socket has the function of lightning protection protection, which effectively absorbs the power surge pulse from the power supply system to ensure the safe use of electrical appliances in harsh environments and thundery areas. It is widely used in places where electronic equipment and electronic appliances are erected. The lightning protection socket quickly absorbs the lightning and surge pulses of the power supply system; Office and appliance equipment will be protected from inrush currents, reducing the probability of electrical appliances being damaged by lightning strikes in a lightning environment.

Application range of lightning protection socket:

The lightning protection socket is mainly suitable for the lightning protection (overvoltage) protection of sub-electrical equipment of the low-voltage AC power supply (220V) system, such as computers, communication equipment, fax machines, high-end audio, film and television equipment, precision instruments, meters, etc.

Do lightning protection sockets work

Since it is called a lightning protection socket, it must be useful. After a lightning strike, the conductor will instantly induce a large voltage and current, causing damage to the electrical equipment of the building. Now the general building is installed with lightning rods, but the lightning rods can only prevent direct lightning, and intelligently form protection for the building, and at the same time, it will also release a large number of induction lightning when preventing direct lightning, so that it will invade the interior of the electrical appliances along the antenna, signal lines and power lines, etc., and bring damage to the electrical appliances.

The lightning protection socket solves these problems, it can not only effectively block the damage of power surges and induction lightning in the power line, but also eliminate all kinds of power surges and induction lightning in TV cables and computer network cables, which is relatively safe in thunderstorms.

The above is what is the lightning protection socket brought to you by Youxian Hao? Do lightning protection sockets workAll of it.

Introduction: Computers, televisions and other household appliances are very common in the home, for the use of household appliances and electrical appliances many people hate the thunderstorm, because the thunderstorm electrical appliances are easy to break or because of lightning strikes and reduce the service life. As the name suggests, the lightning protection socket is a socket with a certain lightning protection effect, and now it is mainly used in household computers, televisions and other electrical appliances, so is the lightning protection socket useful?

What brand of lightning protection socket is good? Follow me to find out:

Is the dust dry lightning protection socket useful? I believe this is a question in the minds of many people, and the answer is yes. After lightning strikes, the conductor can instantly induce a large voltage and current, causing damage to the electrical equipment in the building.

Lightning rods, on the other hand, can only protect against direct lightning strikes and can only protect buildings. When it is anti-direct lightning, it will also release a large number of induction mines, which will invade the interior of electrical appliances along antennas, feeders, signal lines and power lines in an instant, bringing huge benefits to electrical appliances. damage, and the socket with lightning protection can prevent power surges from causing damage to electrical appliances.

The working principle of the lightning protection socket is to use a transient voltage absorber such as a lightning arrester or varistor to install between the input lines to form an infinite impedance, when the instantaneous voltage occurs, the resistor will be rapidly reduced, and the transient energy will be transferred, so as to achieve the effect of protecting the internal electrical equipment. Therefore, the lightning protection socket can effectively absorb the surge pulse from the power supply system, so that the electrical appliance can be used safely in harsh environments and thunderous areas.

Of course not, the thunder tree can be split, your little socket can do? It's okay to come and go, and you can't prevent anything if it's powerful.

It's not lightning protection, it's just to prevent excessive current during thunder.

It is to prevent excessive current from burning electrical appliances during thunderstorming.