How to avoid driving test subject 3 does not turn off

Driving is a journeyman, and cooking makes perfect. Don't just try to be cheap! Find a good instructor to learn to drive!

A good instructor will not only allow you to pass various exams and get a driver's license during your studies, but most importantly, teach you the correct driving skills, so that you can drive on the road alone and drive your car smoothly and safely in all situations.

According to the theory of "integration of people and vehicles", I invented the "double teaching method" and completely quantified the whole process of driving training, compiled into a formula, as long as you follow the program I compiled and say the formula to practice the car will soon be able to achieve the integration of people and vehicles, and successfully pass the exam. And be able to drive on the road independently, students who learn to drive with me are not just for the test, the key is to be able to drive the car on the road independently after getting a driver's license. It is easy to learn to drive and be a modern person.

Commissioned by Beijing Machinery Industry Press, the 2nd edition of the book "Learning to Drive and Prove Zero" edited by me introduces the skills of successfully passing the subject 2 and subject 3 exams and details in detail how to quickly pass the subject 1 and subject 4 exams. I hope it will help you learn to drive, and the book can be bought on Dangdang.com, Haoshu.com, Amazon.com, JD.com** and large Xinhua bookstores around the world. Hope it helps you learn to drive.

Turn on the air conditioner, and it is not easy to turn off the clutch when it is stable.

This includes start-off and drive-stop.

1.Adjust the clutch. If the clutch is lifted too hard or too slowly, it is basically easy to cause stalling and skidding, which will be related to the driver's mentality.

One thing to remember here is that if the car does not turn off, it will not turn off, just step on the clutch. If you feel that the car needs to be turned off, immediately depress the clutch.

2.The use of throttle is also important. The clutch adjusts better.

If you don't keep up with the gas pedal, the car can easily stall and get sleepy. Don't press the gas pedal all at once, you need to press it slowly. Before the clutch is released, you can gently press the accelerator to increase the engine retarding speed, so that it is not easy to stall.

3.The gears need to be aligned. It's the first gear, it's the most basic. Take it easy. Most of them are basically okay.

If you can start, you'll be able to drive normally. Avoid turning off the engine during normal driving, pay attention to the following points:

1.Protects against high and low speeds. When you first start training, you may not have any idea of speed gear.

I will always remember only the gas pedal and forget to slow down and reverse. From 20 mph to 40 mph, wait for third gear at this point. If there is a traffic light ahead, the car will still stall if there is no reverse gear when decelerating and braking.

The 20 40 mph is mostly used in 3rd gear, 40 60 mph is used in 4th gear, and more than 60 mph is used in 5th gear. If you drive in high gear and low speed, the power cannot keep up, which will affect the stalling.

2. When braking, you can step on the clutch at the same time, and it will not turn off. As mentioned earlier, as long as you press the clutch, the car will not stall. At the beginning of car training, the judgment of the brakes may not be proficient enough, and it is likely that the brake will step on the bottom of the Wangcha, which will affect the sharp reduction of the speed of the car and turn off.

So we just need to press the clutch with the left foot when the brake is applied with the right foot, so that we don't have to worry about stalling.

1. Control the clutch: When starting, controlling the clutch is the key to avoid stalling. Novices do not have a good grasp of the clutch, especially the manual transmission of the car, the clutch is slow and easy to stall, so when starting, the left foot should step on the clutch, when it is lifted to the halfway to steady, and then wait for the vehicle to move and then slowly lift the clutch.

2. Keep up with the throttle: While controlling the clutch well, it is also important to keep up with the throttle. When the clutch is lifted, the vehicle moves slowly, and it is easy to stall if you don't keep up with the accelerator. Therefore, when lifting the clutch, gently press the accelerator, so that the car can start more smoothly.

3. Cooperate with the use of handbrake: At this time, novices are easy to slip when they start, and they will panic when they slip and turn off. At this time, it is necessary to use the handbrake in conjunction with it.

Before starting in gear, tighten the handbrake, then lift the clutch halfway, release the handbrake and then keep up with the throttle, so that the start will not slip.

4. Avoid high-gear and low-speed driving: When driving normally, the vehicle is high-grade and low-speed driving, and the vehicle engine will shake slowly, and the power cannot keep up, so it is easy to stall. Therefore, novices should find a good time to change gears, generally 40 kilometers is 3 gears, 50 kilometers is 4 gears, 60 kilometers are 5 gears, and so on, personal experience.

5. Emergency brake and press the clutch at the same time: When you hit the emergency brake, you can not only step on the brake, but also step on the clutch, otherwise the vehicle will turn off if you step on the end. Of course, novices often don't react in time, and it's good to slowly and consciously step on the brakes when stepping away from the contract.

6. Avoid hanging the wrong gear: novices are easy to be nervous when driving, and panic when encountering an emergency. Therefore, novices should concentrate when driving, not be distracted, and remember the gear clearly.

Ignition is divided into starting shutdown and driving shutdown. Tips to prevent starting flameout:1.

Control the clutch. If the clutch is lifted too hard or too slowly, it is easy to cause stalling, and the car will always jump, affecting the driver's mentality. One thing to keep in mind here is that the car will not stall as long as the clutch is on without turning off the engine.

If you feel like the car is going to stall, press the clutch immediately. 2.The use of throttle is also important.

No matter how well the clutch is controlled, if you don't keep up with the throttle, the car can easily stall. Don't step on the gas pedal all at once, press slowly. Before releasing the clutch, you can gently press the accelerator pedal to increase the engine speed, so that it is not easy to stall.

3.The gears should be aligned. It's the first gear to start, which is the most basic, as long as you're not nervous, it's generally fine.

It's okay to start, and it's ready to go. Normal driving to prevent stalling, there are the following points of attention: 1. Avoid high gear and low speed loss.

At the beginning of car training, you may not have an idea of the speed gear, you will often only remember to refuel and put in gear, and forget to slow down and need to back gear. From 20 to 40 miles, at this time hang up the third gear, if the front to the traffic light, deceleration and braking without backshifting, the car will still stall. A trembling skin like 20 40 miles corresponds to 3 gears, 40 60 miles corresponds to 4 gears, and more than 60 miles corresponds to five gears.

If the driving is in high gear and low speed, the power cannot keep up, which will lead to stalling. 2. When braking, you can press the clutch at the same time, and it will not turn off. As I said at the beginning, as long as you step on the clutch courier, the car will not stall.

At the beginning of car training, the judgment of the brakes may not be proficient enough, and it is likely to step on the brakes to the end, resulting in a sharp drop in speed and stalling. So we just need to press the clutch with the left foot when the right foot applies the brake, so that we don't have to worry about stalling.

Subject 3: How to prevent flameout:

First, find a good clutch point and start again

Press the clutch pedal with your left foot all the way down, engage in first gear, hold the steering wheel with one hand, and place the other hand on the lever of the parking brake. At this time, gently lift the clutch to find the half-linkage point. When you feel that the engine sound becomes dull and the front of the car begins to rise, immediately release the handbrake, and at the same time gently press the accelerator pedal with your right foot, and the car can start smoothly and quickly.

2. Observe before you start

Before the car starts, Bubi should first remember to turn the left turn signal to alert other vehicles. After confirming that there are no obstacles in front of the vehicle or on the left side, look through the rearview mirror for the vehicle approaching from behind. Depending on the distance of the vehicle behind you and the speed at which you are driving, you can predict the arrival time and leave plenty of time for yourself to start calmly.

3. Seize the opportunity to shift gears

The timing of gear shifts is not difficult to master, although the timing of shifts is different for each car, but basically you can shift gears when the engine speed reaches about 1700-2000 rpm. Don't keep your eyes glued to the tachometer during the exam, learn to listen to the engine noise with your ears, and look ahead to feel the speed of each gear shift. If you pay more attention to these things in your daily practice, you will soon be able to grasp the reasonable timing of gear changes.

1. Forget to let go of the handbrake

Don't pull the handbrake halfway through. If you forget to put it in the beginning, it will cause you to hang up directly. In addition, the handbrake must be put to the end.,During the exam, I met a girl who didn't go to the end and hung up directly.。

Also, when you are in first or second gear, you must pay attention to controlling the strength when you step on the brakes, and if the speed is slow, you will be with the clutch.

2. Ignition with gear

This very low-level mistake is mainly caused by the nervousness of the students' exams, so the students should develop the habit of igniting in the middle when learning to drive.

3. When lifting the clutch too fast

The solution to this is to release the clutch slowly, stop and stabilize immediately when the car moves, and then slowly release the clutch. In addition, when starting out, students should not play the direction, and if they want to turn, they should also play the direction after the car moves.

4. Start in second gear

Who is so good at the test, then here I will tell you, most of them are caused by stopping at the time of the turn, but forgetting to put the gear back into first gear, so when the car stops, it should immediately change to the first gear.

5. When starting on the ramp, the clutch and brake should be stepped on at the same time

Then slowly release the clutch, stabilize the clutch when the body moves, and then slowly release the brake.

It is divided into starting shutdown and driving shutdown.

Start flameout prevention tips:

1.Control the clutch. If the clutch is lifted too hard or too slowly, it is easy to cause stalling, and the car will run out, which will affect the driver's mentality.

The thing to remember here is that the car will not stall as long as the clutch is pressed without turning it off. If you feel that the car is going to stall, step on the clutch immediately.

2.The use of throttle is also important. No matter how well the clutch is controlled, if you don't keep up with the throttle, the car can easily stall. Don't step on the gas pedal all at once, press it slowly. Before releasing the clutch, you can gently press the throttle to increase the engine speed, so that it is not easy to stall.

3.The gears should be aligned. It's a gear, it's the most basic thing. As long as you're not nervous, you're generally fine.

It can start, and it can drive normally. To prevent stalling during normal driving, there are the following precautions:

From 20 to 40 miles, at this time, three gears are in gear. If there is a traffic light ahead, the car will still stall if there is no reverse gear when decelerating and braking. Generally 20 40mph for 3rd gear, 40 60mph for 4th gear, and over 60mph for 5th gear.

If you drive in high and low gears, the power can't keep up, which will cause stalling.

2.When braking, you can fail to press the clutch at the same time, so that the ignition will not stall. I said at the beginning that as long as you press the clutch, the car will not stall.

At the beginning of driving practice, you may not be proficient in judging the brakes, and you are likely to press the brakes all the way, causing the speed of the car to drop sharply and stall. So we just need to put the brake on the right foot and clutch with the left foot, so we don't have to worry about stalling.

Practice clutch control: After the engine starts, slowly release the clutch and let the vehicle move slowly. This avoids collisions between the brake and accelerator pedals, making it easier to keep things smooth.

Assist with the handbrake: When you want to stop on a slope, pull the handbrake first and press the brakes, which will prevent the car from sliding. When you're ready to go, release the handbrake first, then lift the clutch and lightly press the throttle, which will make it easier to get the car started.

Pay attention to the order of the gears: In the Subject 3 exam, it is very important to have the correct order of the gears. If you don't shift gears in the right order, it can easily cause the car to stall. Therefore, during the practice, it is necessary to pay attention to the order of the gears.

Keep your mind calm: It's important to adjust your mindset. In the Subject 3 exam, if you feel nervous or anxious, you may have problems such as stalling. Therefore, maintaining a calm state of mind is an important factor in keeping your car from turning off.

In short, it takes a long time to practice and accumulate experience in the Subject 3 exam. The above methods can only provide some instructive suggestions, and more importantly, it is necessary to practice more and master the correct skills and methods through continuous practice.