Please teach the reversing and warehousing correction left and right distance operation

Driving is a journeyman, and cooking makes perfect. Don't just try to be cheap! Find a good instructor to learn to drive!

A good instructor will not only allow you to pass various exams and get a driver's license during your studies, but most importantly, teach you the correct driving skills, so that you can drive on the road alone and drive your car smoothly and safely in all situations.

According to the theory of "integration of people and vehicles", I invented the "double teaching method" and completely quantified the whole process of driving training, compiled into a formula, as long as you follow the program I compiled and say the formula to practice the car will soon be able to achieve the integration of people and vehicles, and successfully pass the exam. And be able to drive on the road independently, students who learn to drive with me are not just for the test, the key is to be able to drive the car on the road independently after getting a driver's license. It is easy to learn to drive and be a modern person.

Commissioned by Beijing Machinery Industry Press, the 2nd edition of the book "Learning to Drive and Prove Zero" edited by me introduces the skills of successfully passing the subject 2 and subject 3 exams and details in detail how to quickly pass the subject 1 and subject 4 exams. I hope it will help you learn to drive, and the book can be bought on Dangdang.com, Haoshu.com, Amazon.com, JD.com** and large Xinhua bookstores around the world. Hope it helps you learn to drive.

There are many empty positions on either side, and the steering wheel hits which.

1. Correct the direction when reversingMaster the principles of vehicle driving: where to hit in the direction and where to swing the rear of the car. First determine which side the body is offset, then think about which side the rear of the car should be taken towards, and finally turn in the corresponding direction, and the body is about to return to the right direction and move on to the next operation.

2. When the body is biased to the rightThe rearview mirror presents a position relationship of "wide on the left and narrow on the right", and the steering wheel is turned 1 or 4 times to the left, and the body can return to the right direction.

3. When the body is on the leftThe rearview mirror presents a position relationship of "wide on the right and narrow on the left", and the steering wheel is turned to the right for 1 or 4 turns, and the body can return to the right direction.

4. The body is parallel to the garageBut the car as a whole is left, if not adjusted, the left out of the garage is easy to press to the left front of the garage corner, so you can first play to the right 1 4 circles of the direction, observe the front wheel do not easily press the line, when the distance on the right side is about the same, and then to the left 1 4 circles of the direction, the body is parallel to the garage again, back to the positive direction. The body as a whole is biased to the right, and in the same way, the direction of operation is reversed.

When you see a right turn in the rearview mirror, with the rear movement of the body, when the right rear wheel of the car does not reach the corner, we have to accurately judge the distance between the body and the corner, and the distance is best kept at 20cm. If it is not possible to keep a distance of 20 cm, or even if the wheel will press against the corner of the hood on the right, you should immediately turn to the left, depending on the speed of the body starting from the right sideline.

When ensuring that the wheels do not press against the right line and maintain a distance of 20 cm from the right line, the steering wheel should be killed to the right immediately. As the body moves back, the body and the sidelines are slowly approaching parallel. At this time, the left and right rearview mirrors should be observed at the same time, and the distance between the body and the left and right sidelines should be corrected.

Note that the body is parallel to the garage sideline, and the distance is basically equal. At the same time, pay attention to the lower edge of the left rearview mirror and the edge of the garage entrance. When the garage entrance edge overlaps the left mirror (see picture), press the clutch and brakes, stop, and reverse the garage to the right.

In the process of driving practice, be sure to learn to look in the rearview mirror. Some students often reverse without looking in the rearview mirror when driving practice, and they will definitely fail. Therefore, when looking at the rearview mirror, you can first look at the rearview mirror when the car is stationary, mainly to see the position of the car, the distance from the warehouse siding, etc.

Then, after thorough familiarization, you can check it smoothly.

Millions of car purchase subsidies.

Reversing into the garage: first from the right side of the reversing into the garage, the coach will give you a time to kill the steering wheel, if you kill the steering wheel at this point in time too fast, too early, then it is easy to press the library edge on the right side of the library, that is, the right narrow, so in the process of reversing into the garage to reverse half a circle of the steering wheel (to be flexible), and then continue to reverse, and then kill the steering wheel appropriately, when the car is parallel to the garage, quickly put the whole steering wheel.

If you kill the steering wheel too slowly at the point designated by the coach at the beginning of reversing, even if you kill the steering wheel all the time, it is easy to rot and cause the left side of the garage to be pressed, which is not easy to recover.

1. First of all, we park the car outside the right starting line, gently lift the clutch, move the car backwards, and control the speed. First observe the left rearview mirror, and when the right starting point sensing line appears on the lower edge of the left rearview mirror, knock the steering wheel to the right.

2, continue to reverse, followed by the observation of the right rear-view mirror, when in the rear-view mirror to see the right library angle, with the body of the backwards, in the car right rear wheel is not to the library mouth when we have to accurately judge the distance between the body and the library angle, it is best to keep a distance of 30 centimeters, if the distance is not enough is likely to press to the right library angle, then you can immediately correct the left side to search the hand to the disk, how much to play according to the distance and speed.

3. When ensuring that the wheels will not be pressed to the right side line and can maintain a distance of 30 cm from the right side line, immediately kill the steering wheel to the right, then the body will continue to retreat, and the body will be slowly parallel to the side line.

4. When the body is parallel to the garage side line and the distance is basically equal, then it is necessary to look closely at the lower edge of the left rearview mirror and the edge of the garage mouth, when the side line of the garage mouth coincides with the left rearview mirror, step on the clutch and brake, stop, and the right reverse garage is completed.

1. Hit the direction to the right, drive to the front of the car is oblique, but the relative position is in the middle, drive two meters, and then kill to the left, and adjust it yourself when reversing.

2. Reversing into the Hui Jue Library is a project that must be carried out after 2013 to obtain a small car driver's license. Examine the driver's ability to operate the car on site. Reversing into storage is an assessment point in the driver's test.

That is, in the movement, the chariot is properly poured into the garage from both sides.

The distance between the reversing and storage corners and the left and right distance from the body is 30cm is the best. When reversing into the garage, there is an error in observing the distance between the body and the corner of the garage through the rearview mirror. The distance between the rear wheel grounding and the storage angle is estimated in the rearview mirror, but this is an error with the actual distance, and it is necessary to practice more to grasp the error.

Reversing into storage. 1. If the score is not in accordance with the prescribed route and sequence, it is not qualified; If the body is out of the line, it is unqualified; If the warehouse is not entered, it is unqualified; Those who stop halfway are not qualified.

Second, the trick: when starting to reverse, rotate a circle and a half of the steering wheel to the right, observe the wheel above the right rearview mirror, and the right line of the garage should be about 40 cm away, which can ensure that the right side will not press the line when reversing into the garage.

Look in the left mirror, and when you can see the left line of the garage, immediately turn the steering wheel half a circle to the left and continue to reverse.

If you look at the left and right mirrors, there are solid garage lines on both sides, and when the distance is about the same, immediately turn the steering wheel back to the left and continue to reverse.

Look in the left rearview mirror until it completely covers the front of the garage and brake.

Don't rush to turn left when moving forward, and pay attention to the left side mirror when it coincides with the vertical line on the side, and then turn the steering wheel to the left and a half.

The precautions for storage on the left are the same as those on the right, except that the rearview mirrors to be observed are in reverse order.