How to play the flute well, is there any technique and speaking? Ladies and gentlemen, help! I can t

Tuyin is a very important technique for playing the bamboo flute. There are two types of tongues that are often used: long tongues and short tongues.

The tongue acts like a piston that acts as a blocker of airflow. When the tongue blocks the mouthpiece, the sound is interrupted, and the tongue leaves the mouthpiece, and the sound continues to be produced. When we play ordinary music, we often use two methods: legato and staccato (short tone).

The main thing is to solve the problem of staccato sound. The pronunciation method of "spitting sound" is to put the tongue against the upper teeth and flesh before blowing, and retract the tip of the tongue as soon as it touches the position near the mouthpiece during blowing, so that the air flow is blown out and the sound break effect is achieved.

Tuyin is a very important technique for playing the bamboo flute. It is like the role of a bow when a stringed instrument is played. There are two types of tongues that are often used: long tongues and short tongues.

1 Long tongue sticking out.

The tongue is blocked for a short time, and the long time away from the mouthpiece is a long tongue stick.

2 Short tongue sticking out.

Short tongue protrusion includes single spit, double spit, triple spit and so on. It is characterized by the long time that the tongue blocks the mouthpiece and leaves the mouthpiece for a short time, just like the leading bow and jumping bow of a stringed instrument.

Pay attention to the following points when practicing:

The pronunciation method of blowing "Tuyin" should be correct. The pronunciation should be strong and clear.

Exhale without interruption while practicing. The qi should be exhaled gently, not too much.

When the tongue is contracted, the distance from the mouthpiece should be as short as possible so that the air can pass through.

The movement of the tongue should be flexible, do not be overly nervous, and the tip of the tongue should be partially blocked from the mouthpiece without force, as long as it touches. Especially during attack, it is necessary to pay attention to the simultaneity between the vibration of the tongue and the airflow of the blowing, otherwise, the articulation will be blurred.

It's all nonsense! Buy your own textbook! Xu Guoping's or Zhao Songting's textbook (with CD)!

Follow suit! Don't waste your time here! Highly recommended for beginners who want to learn well!

It's best to find a teacher to take you for a year, don't blow it yourself and don't know if you make a mistake Wrong posture or wrong fingering will affect whether you can still walk in the end I am surrounded by technical problems Make them regret it in the end, and it is not easy to change the fault!!

1. The correct posture of holding the flute, with the right hand in front and the left hand in front, no matter which hand is in front, you must hold your chest high and raise your head.

2. Press the tail end of the flute slightly down to facilitate the flow of saliva.

3. The lips are naturally closed, hold both ends of the flute with both hands, hold the mouthpiece with the left hand, hold the tail with the right hand, and blow the hole to the lower edge of the lip, aiming at the blowhole and blowing.

4. When the breath rushes out, only let a small gap to let the breath pass, and make it into a bundle of air columns, which are blown out diagonally under the blowing hole.

5. In order not to flush the lips apart when the breath is flushed out, and the breath is dissipated, the cheek muscles must be hard to keep the outlet of the breath small.

6. The sound of blowing out is required to be pure, avoid mixed with air sound, practice often in front of the mirror, learn how to align the air holes, make the pronunciation position correct, impartial, and make all the breath into flute sounds.

1. Practice method: mouth shape: the lips are slightly closed, the corners of the mouth are shrunk back, leaving a small slit, just like a cup of tea, when the water is full, the tea leaves float on the top of the Hui slow cracking water, and gently blow the mouth shape of the tea leaves.

2. Technique: Don't hold down all the six holes of the flute, because there may be air leakage and no sound! You can open all your fingers.

3. Flute film: Don't use flute film first, because it is not easy to paste it well! You can use the plastic wrap used in the refrigerator, don't need any glue, cut a piece of about 2 cm * 5 cm, and stick it flat on the flute pronunciation hole.

3. Practice: Use this mouth shape, stick to the blowing hole of the flute, blow at the edges and corners of the hole, start with light blowing or heavy blowing, or repeatedly blow lightly and heavily, as long as there is a sound before it is closed, hold down the three holes on the flute, that is, "1", and then blow "2". Take your time and learn how to blow better.

1.Before playing, it is necessary to keep the mouth moist, and when it is dry, it is difficult to play, and the timbre of the blowing is not very good and astringent, and it affects the lips, tongue, and qi technique, and it is not suitable to oversaturate and hungry the flute. Affect the control of the scumbag breath of the hall.

2.When I didn't know anything before, in order to make the flute more beautiful, I rinsed the flute with water, and then pasted the flute membrane, and the timbre was obviously much better than when I didn't rinse. Therefore, before playing, it is necessary to fully slip the flute to increase the moisture in the flute.

The tone would be better.

3.When pasting the flute film, the viscose should not be thick, it should be light, and a little stickiness is good, so that it does not affect the blowing and is easy to adjust.

4.In winter, to prevent water vapor from wetting the flute film, you can apply some white wax on the thick wall around the flute membrane hole, and use a small metal rod to heat the soup in boiling water when it is uneven. Don't get any protruding wax spots in the barrel.

5.The pronunciation point of the flute is at the blowing hole, and it is advisable to face the blowing hole near the microphone when playing, and be careful not to let the air flow against the microphone and make a breath impact sound.

6.In order to reduce the disturbance of the people, self-adhesive or thick tape can be used as a flute film to reduce the pronunciation of the flute.

7.Usually, you can cut a small amount of flute film, wrap it in the original paper strip and put it in the mouthpiece headstock on the side of the flute blowing hole, and then you can use it.

8.I made my own dime plastic box, now there are many flavors of mints sold in the supermarket, it is packed in a small metal box, I changed it to use it as a dime plastic box is very useful.

9.I went to the stainless steel store and bought two thick stainless steel wires 50 cm and 80 cm long, and tied a soft flannel cloth or sponge on my head to make cleaning tools for large and small flutes. (Thick copper wire and aluminum wire are also fine).

10.I used A3-sized paper to rearrange and print the solo score on a piece of paper, which was easy to practice. You can also use the high-grade paper of the old wall calendar, and Liang Tsai is more sophisticated.