Are Pirelli tyres the new P0 or new P7?

New P7. Introduction:

Tires are ring-shaped elastic rubber products that are grounded and rolled on various vehicles or machinery. It is usually installed on a metal rim, which can support the body, cushion external impacts, achieve contact with the road surface and ensure the driving performance of the vehicle. Tires are often used in complex and demanding conditions, and they are subjected to various deformations, loads, forces, and high and low temperatures when driving.

Basic function: Tire is one of the most important components of the car, its main functions are: to support the full weight of the vehicle, to bear the load of the car; Transmit the torque of traction and braking to ensure the adhesion between the wheels and the road surface; Reduce and absorb the vibration and impact force of the car when driving, prevent the auto parts from being subjected to severe vibration and early damage, adapt to the high-speed performance of the vehicle and reduce the noise during driving, and ensure the safety, handling stability, comfort and energy-saving economy of driving.

Continental and Pirelli are both internationally renowned tire brands, each with its own merits, and it is impossible to say which one is better. The choice of tires mainly depends on the performance requirements of the car owner. Athletic ability:

1.Pirelli 2Goodyear 3

Dunlop 4Bridgestone 5Michelin 6

Continental comfort and quietness: 1Continental 2

Michelin 3Dunlop 4Bridgestone 5

Goodyear 6Pirelli Wear Resistant: 1

Bridgestone 2Pirelli 3Dunlop 4

Michelin 5Continental 6Goodyear** from high to low:

1.Michelin 2Goodyear 3

Pirelli 4Continental 5Bridgestone 6

Dunlop safety factor: 1Pirelli 2

Goodyear 3Dunlop 4Bridgestone 5

Michelin 6In general, Continental is quieter and more comfortable than Pirelli, while Pirelli has a higher grip and athleticism than Pirelli.

The comparison is as follows:

P5: Good wear resistance, solid, decent, affordable, but this pattern has been a new product, this pattern has basically faded out of the Chinese market, basically do not need to consider.

P7: Asymmetrical pattern, Pirelli's former classic series, well-known, classic products that emphasize comfort and handling, low noise, no protection.

Related information

Pirelli, Pirelli Tyres is one of the most prestigious tyre companies in the world today. Founded in Italy in 1872, Pirelli is also the largest sponsor of Inter Milan Football Club.

It has 24 factories in 12 countries around the world. More than 100 years of experience in tyre production have resulted in Pirelli tyres being comfortable, durable and safe. Pirelli Tyres attaches great importance to the Chinese market.

It has been recognized by the world's famous automobile manufacturers for a long time. Famous car brands such as Audi, Bentley, Ferrari, Lamborghini, BMW, and Mercedes-Benz have designated Pirelli tires as original matching tires.

In 2015, ChemChina acquired Pirelli for 7.1 billion euros.

Summary. Hello, very happy to answer for you, the difference between Pirelli old P7C2 and new P7 is first of all in **, the new P7 is two or three hundred more expensive than the old P7C2, followed by the pattern, the old P7 is the old pattern, the new P7 is the new pattern, and then the sidewall, the old P7 sidewall is thicker than the new P7, and it is harder than the new P7. Finally, in terms of performance, the handling of the old P7 is better than that of the new P7, and the wear resistance is slightly better than that of the old P7, but the grip of the new P7 is very obvious compared to the old P7; Comfort is also much improved; The mute effect has improved significantly; The direction is brisk; However, the new P7 has no edging design, and the wheels are easy to bump.

First of all, the improvement of tire grip and comfort, due to the use of more delicate tread design, so that even in sharp corners, the tires have clear handling and directionality, which can give the driver enough confidence. At the same time, the noise reduction effect of the tires has also been significantly improved, providing a comfortable driving experience. Of course, it's not that the old Pirelli P7 is bad, its overall performance is also quite good, and the new P7 is the existence of excellence.

The downside of Pirelli's new P7 compared to the old P7 is its edging-free tyre design. Such a design can indeed make the tire have a good comfort, but at the same time, the protection of the tire will also be affected to a certain extent, if the tire is bumped, there is a certain chance of damage to the internal structure. Especially in some places where the road conditions are bad, there is a high chance of tire damage.

The difference between Pirelli's new P7 and P7C2.

Hello, very happy to answer for you, the difference between Pirelli old P7C2 and new P7 is first of all in **, the new P7 is two or three hundred more expensive than the old P7C2, followed by the pattern, the old P7 is the old pattern, the new P7 is the new pattern, and then the sidewall, the old P7 sidewall is thicker than the new P7, and it is harder than the new P7. Finally, in terms of performance, the handling of the old P7 is better than that of the new P7, and the wear resistance is slightly better than that of the old P7, but the grip of the new P7 is very obvious compared to the old P7; Comfort is also much improved; The mute effect has improved significantly; The direction is brisk; However, the new P7 has no edging design, and the wheels are easy to bump. First of all, the improvement of tire grip and comfort, due to the use of more delicate tread design, so that even in sharp corners, the tires have clear handling and directionality, which can give the driver enough confidence.

At the same time, the noise reduction effect of the tires has also been significantly improved, providing a comfortable driving experience. Of course, it's not that the old Pirelli P7 is bad, its overall performance is also quite good, and the new P7 is the existence of excellence. The downside of Pirelli's new P7 compared to the old P7 is its edging-free tyre design.

Such a design can indeed make the tire have a good comfort, but at the same time, the protection of the tire will also be affected to a certain extent, if the tire is bumped, there is a certain chance of damage to the internal structure. Especially in some places where the road conditions are bad, there is a high chance of tire damage.

It's all copy-paste, and it's useless at all.

The abrasion resistance of Pirelli P7 is 1000, while the abrasion resistance of P7C2 is 1100, the difference is that the abrasion resistance is different.

Hello, I have read your question and am sorting out the answer, please wait a moment Pros It ensures optimal handling in terms of traction, braking and lateral grip on any surface, even in extreme corners, while also ensuring comfort on long journeys. Disadvantages: The P7 tires that focus on comfort are soft in texture, resulting in insufficient carcass strength and average wear resistance. Moreover, the tire irregularity control and fuel consumption performance are also decent.

The advantages and disadvantages of Pirelli P7 tires are as follows: a number of envy potatoes

Pros: The Pirelli Cinturato P7 is a high-performance, eco-friendly, comfortable and safe tyre, and is Pirelli's first "Green Change" tyre, manufactured with the latest materials and optimised tread design.

The tread block in the compact center of the tread and the strong external area can reduce the tire deformation when the car turns sharply, and improve the control performance of cornering; Its special pitch sequence can effectively reduce rolling noise.

It has four wide longitudinal grooves on the tread to improve drainage and avoid potential water drift, ensuring superior safety and control. The new P7 and P1 use environmentally friendly materials, which also minimise the environmental impact throughout the entire cycle of tyre production and use.

The Pirelli P7 is also manufactured with innovative and advanced polymeric materials, with evenly distributed tread pressure and even tread wear, which allows the tyres to last longer while maintaining a high level of performance and safety. The new P7 is also a tyre with a "run-flat" function.

Disadvantages: The disadvantage of Pirelli P7 tires is that the P7 tires, which are more comfortable than the comfort, have a soft texture, resulting in insufficient carcass strength and average wear resistance. In addition, the tire irritability control and fuel consumption performance are also decent.

This tire should be very good, and then you can believe in the quality or something.

Pirelli P 8 tires have good wear resistance.