How to save the most electricity in the refrigerator How to save the most electricity in the refrige

Hello! 1) Try to place the refrigerator in a shady place away from direct sunlight. Because for every 5 degrees increase in the temperature around the refrigerator, the internal power consumption increases by 25%.

2) There should be a gap of about 10mm between the food stored in the refrigerator and the wall of the box, and between the food and the food. The middle layer of the refrigerator should not be too full, which should be conducive to the circulation of cold air, which is not only conducive to saving electricity but also conducive to the preservation of food.

3) Minimize and shorten the time and frequency of door opening. Think about what you want to take and what else you need to put in before opening the refrigerator, and do it all at once. Because every time the refrigerator is opened, the temperature in the box has to be restored, and the compressor has to work.

4) After a power outage in the hot summer, it takes a long time for the refrigerator to restart. You can freeze some water into ice cubes in a small plastic bag and keep it in the freezer all the time, so that the temperature in the refrigerator does not rise too quickly in the event of a power failure.

5) The temperature is low at night, which is conducive to the heat dissipation of the condenser. So if you want to freeze ice cubes or make cold drinks, it's best to make them at night.

If possible, it is recommended to buy an energy-efficient refrigerator, which can save you a lot of money.

It is recommended that you do not disconnect the power of the refrigerator frequently, which not only consumes electricity, but also easily causes damage to the refrigerator.

In fact, the way people operate when using the refrigerator will also affect the power consumption of the refrigerator. Only by using the refrigerator rationally can we effectively reduce electricity consumption, and here are a few ways to save electricity:

Refrigerator placement: The refrigerator should be placed in a place with low ambient temperature and good ventilation conditions, away from heat sources, avoid direct sunlight, and leave appropriate space on the left and right sides of the top of the refrigerator and the back when placing it to facilitate heat dissipation.

How to access food: When picking up and storing food, it is necessary to minimize the number and time of opening the door, open and close the door quickly, open the door angle as small as possible, and try to take out or put the food in a planned way at one time, and avoid too much heat entering the box. It is strictly forbidden to put hot food into the refrigerator, because the hot food has a relatively high calorie content, and after putting it in the refrigerator, the temperature in the box will rise sharply, and at the same time increase the frost thickness on the surface of the evaporator, the compressor will work for too long, and the power consumption will increase.

The food stored in the refrigerator should be in appropriate amount, not too full and too tight, which will affect the convection of the air in the box, make it difficult for the food to dissipate heat, affect the preservation effect of the food, and increase the working time of the compressor at the same time, so that the power consumption will increase. Vegetables, fruits and other foods with more moisture should be washed and drained, wrapped in plastic bags and put in the refrigerator to reduce water evaporation and thicken the frost layer, shorten the defrosting time, and save electricity.

Maintenance method: regularly defrost and remove the ash on the surface of the condenser and box to ensure that the heat absorption and heat dissipation performance of the evaporator and condenser are good, shorten the working time of the compressor, and save electricity. On the premise of ensuring the quality of food, according to seasonal changes, the type and quantity of food, reasonably adjust the temperature controller, so that the refrigerator is always in the best working condition.

In the event of a power outage, please reduce the number of times you open the door and try not to put more food in it to reduce the loss of cold energy.

Common sense of refrigerator use:

1. After the new refrigerator is purchased, it should be wiped several times with a clean rag, but do not close the door after wiping it clean, open the door to let the odor inside dissipate, or use an electric fan to blow it inside to speed up the emission of the odor, and then use electricity.

2. After the new refrigerator is carried back, it should be left to stand for a few hours before powering on the test.

3. The refrigerator should be placed in a cool and ventilated position, and a certain amount of space should be left around it to facilitate the ventilation and heat dissipation of the refrigerator and improve its refrigeration efficiency.

4. When the machine is powered on, the temperature setting of the freezer should be adjusted at minus 18 degrees, and the temperature of the refrigerated room should be about 5 degrees. If there is no food in the freezer that needs to be frozen for a long time, the temperature can be appropriately increased, so that it is more energy-saving. The same goes for the refrigerator, if there is no special food request, you can turn the problem up to between 8-12 degrees, so that it is more energy-efficient, especially in summer, when the power saving is particularly obvious.

However, if there is yogurt in the refrigerator, the temperature should be between 2-6 degrees. The mechanical thermostat should adjust the size of the digital gear according to the ambient temperature of the season, adjust the smaller digital gear in summer, adjust the middle gear in spring and autumn, and adjust it in the larger digital gear in winter. The smaller the gear adjustment, the more power saving.

5. When the machine is powered on, do not put in the food first, wait for the temperature in the refrigerator to drop and stabilize, and then slowly put in the food after the compressor starts and stops normally, and do not put too much food at one time to avoid the load of the compressor.

6. The food placed in the refrigerator should be sealed and wrapped in a container or food bag to avoid odor caused by mutual odor.

7. If it is a direct cooling refrigerator, when the frost thickness in the freezer exceeds 6 mm, it is necessary to manually defrost it in time to avoid reducing the refrigeration efficiency.

1.Defrost regularly.

If we do not remove these frosts regularly, it will directly affect its refrigeration effect, and will also increase its power consumption, which is easy to damage the compressor. Therefore, when we see that the thickness of the frost is more than 7cm, it is time to defrost.

2.Reduce the number of door openings.

Every time we open the refrigerator door, the outside heat will enter the refrigerator, and the cold air in the refrigerator will flow out, if the refrigerator door forgets to close, then the compressor will be loaded and need to run the compressor again. Therefore, when we take food, we should move quickly, and do not open the door at too much angle to reduce the loss of cold air as much as possible. If you don't have any inventory, don't leave your fridge empty, as it consumes a lot of electricity.

A good idea is to put a small basin of water in it and let it freeze, which will help keep the temperature low and reduce energy consumption.

1. The temperature regulator gear should be reasonably selected. The temperature inside the fridge is one of the biggest causes of power consumption, and if the temperature inside the fridge is kept colder, then the more power the fridge will consume. Therefore, when using the refrigerator, the gear of the thermostat should be adjusted according to the season.

The temperature control knob is generally in place, and the higher the number, the lower the temperature in the freezer. Generally, in spring and autumn, it is put on 3 gears, depending on the requirements, whether the freezer can reach below minus 18 degrees. In order to achieve the purpose of food preservation and power saving, it can be played to 1 or 2 gear in summer, and 4 or 5 gear in winter.

2. Defrost in time. The refrigerator is powered all year round, in the process of refrigeration, the water vapor emitted by the food in the box and the moisture in the air will condense into frost on the surface of the freezer, and the frost in the refrigerator is too thick to produce great thermal resistance, which not only affects the exchange of cold and heat, but also the refrigeration effect is worse, not only more power consumption, but also the refrigeration effect is greatly reduced. Therefore, it is necessary to remove the cream regularly.

3. Reduce the number of door openings. If you want the refrigerator to not consume electricity, you need to reduce the number of times the refrigerator opens the door. The length of the refrigerator door opening time directly affects the power consumption of the refrigerator, and the time to open the refrigerator door at one time is 1 minute, and the temperature in the refrigerator room rises from about 5 degrees to about 20 degrees; When the refrigerator door is closed and the temperature is lowered to 5 degrees, the compressor needs to work continuously for nearly 20 minutes.

4. Put ice cubes in the refrigerator. Putting a piece of ice in the refrigerator compartment can reduce the starting time of the refrigerator compressor and achieve the purpose of saving electricity. In addition, you can also take out the food that needs to be thawed in the freezer one day in advance and put it in the refrigerator to thaw, which can also reduce the temperature in the refrigerator.

The correct switch inside the refrigerator:

The OFF and ON switches inside the refrigerator are refrigeration switches, and the 123456 is the refrigeration gear. Mechanical refrigerators need to manually adjust the temperature, open the refrigerator, see that there will be a circular rotary switch in the refrigerator room, which is marked with a number from 0 to 6, 0 is not working, the larger the first number, the stronger the refrigeration, 6 is the highest intensity refrigeration, as long as you rotate the button to adjust the temperature.

Precautions for the use of the refrigerator:

1. Put the glassware in the air outlet of the frozen or refrigerated room.

Glass bottles or glass containers should not be placed in the air outlet of the air duct system in the freezer or cold room, as this will cause the bottle to burst and cause personal injury.

2. Put flammable and explosive materials in the refrigerator.

When storing volatile flammable and explosive materials such as alcohol and gasoline in the refrigerator, due to the small size of the refrigerator, it is easy to form a mixture of celery grinding, and if there is a spark when starting, it is likely to occur.

3. Place other electrical appliances on the refrigerator.

Do not place and use electrical appliances with electromagnetic induction, such as microwave ovens, rice cookers, voltage regulators, etc., on and around the top of the refrigerator.

This is because electrical appliances with electromagnetic induction will cause electromagnetic interference to the refrigerator's mega bucket cooling system, which will cause the refrigerator's thermostat to start in a chaotic state, that is, the thermostat is broken. In addition, putting a microwave oven and refrigerator together can cause resonance, which is not good for the device and consumes electricity.

If you want to save electricity in the refrigerator, you have a lot of knowledge in setting up and using it, and pay attention to the following points in use, which can make the power consumption of the refrigerator lower.

1. Set the temperature reasonably, the mechanical temperature control refrigerator should look at what is usually put in it, the best temperature for meat in the freezer is minus 14 to minus 18 degrees, and the best temperature in the refrigerator is about five degrees if it is leftovers and vegetables and fruits, so that it can be generally adjusted to the position of 3 or 4. The electronic temperature control can be set according to the optimal temperature.

2. The number of items put in will also affect the power consumption. When the refrigerator is in use, it is not that the less things you put in, the more electricity you will save money, the fewer things you put in, and the refrigerator will rise in temperature faster after the compressor is shut down, so that the compressor will work for a longer time and consume more electricity. If there are fewer things in the refrigerator, the temperature in the refrigerator will rise soon after the door is opened, and the temperature will rise very slowly when there are more things.

Some refrigerators come with two plastic cold receivers in the package to increase the holding time.

3. Refrigerator placement. The shell of the refrigerator has both heat dissipation function, and the periphery is generally required to be more than 10 cm away from the wall when placing the refrigerator, so that the heat dissipation is fast and conducive to the exchange of cold and heat, so that the refrigerator can be refrigerated faster.

4. Reduce the number of door openings and shorten the opening time. After the refrigerator is opened, the hot air from the outside will quickly enter the refrigerator, reducing the number of door openings and shortening the opening time, effectively reducing the compressor running time.

When using the refrigerator, you should also pay attention to not placing any items on the outside of the refrigerator, and do not cover it, so as not to affect the heat dissipation. In addition, after setting the temperature, there is no need to adjust, some people think that the temperature can be adjusted higher in winter, which is also wrong, the optimal temperature of the items put in it has not changed, and the refrigerator does not need to be adjusted, because the temperature inside is the same in winter and summer, but the working time of the compressor will also change when the ambient temperature changes, and if the indoor temperature is lower than in summer, it will also reduce power consumption if the indoor temperature is lower than in summer. What's more, the indoor temperature of some buildings is not low in winter, and adjusting the temperature is not necessarily a good thing.

01 In winter, it is recommended to use 4-6 gears for 7-speed refrigerators. It is recommended to use 3-4 gears for the 5-speed refrigerator, or you can decide according to the ingredients in your refrigerator, use 4-5 gears for less things, and use 5-6 gears for more things.

The temperature control adjustment of the refrigerator needs to be adjusted according to the season, and the temperature control is actually adjusting the temperature difference coefficient, which means that the temperature difference between the outside and the refrigerator, the larger the temperature difference between the refrigerator and the outside of the refrigerator, the smaller the temperature control coefficient adjustment, on the contrary, the smaller the temperature difference between the refrigerator and the outside of the refrigerator, the greater the temperature control coefficient adjustment. Gear 0 is the shutdown gear, that is, the compressor is not working, it is generally not recommended to open this gear, because this is the room temperature state, if the refrigerator is not refrigerated, then the food simmered in the refrigerator will be broken.

1-2 gear is a low gear, which is suitable for adjustment and use in summer; In spring and autumn, the weather outside is suitable, and the state of neither hot nor cold is suitable for opening 3-4 gears; In winter, it should be adjusted to 4-5 gears, if the refrigerator has more things, open 5-6 gears, and open 4 gears if there are fewer things; The 7th gear is a forced refrigeration gear, which is generally opened when it is suitable for rapid freezing, and it is not recommended to open the 7th gear at ordinary times.

The higher the number, the lower the temperature in the freezer, the longer the compressor working time, and the greater the power consumption. The gear of the thermostat should be adjusted according to the seasonal temperature change, generally in spring and autumn we can adjust it to 3 gears, depending on your requirements, whether the freezer can reach below minus 18 degrees. In order to achieve the purpose of food preservation and power saving, it should be adjusted to 4 or 5 gear in winter.

Generally, the thermostat of the refrigerator is located in the refrigerator room, which can be adjusted in a low gear in summer, between 1-3 gears, and can be adjusted in the middle gear in spring and autumn, and can be appropriately adjusted higher in winter, and at the same time turn on the winter temperature compensation switch, but don't forget to turn off this switch when the temperature warms up, otherwise it will be very power-consuming.

When the room temperature is below 10°C, the thermostat should be set to the "6" position. 7 is the highest gear, adjusted to the quick-freezing state of the refrigerator, after use needs to be turned back, otherwise the refrigerator will not stop working. If you want to save trouble, you can adjust the thermostat to the middle gear.

Remember: without affecting the freshness of the refrigerator, setting the thermostat to a low setting (first gear) is the most energy-efficient.