-
Anonymous users2024-02-07Yes, it can be set.
Set it on the computer you want to control.
Right-click on My Computer -> Properties -> Remote.
Check the Remote Desktop.
in "Allow users to connect to this computer remotely".
Then tap Select remote user
In the pop-up dialog box, click the "Add" button.
In the dialog box that pops up, enter the username of your computer.
If you don't change your username, it's the default administrator, and then click "OK"->OK->OK.
on your computer.
Enter MSTSC in Start-> Run, and fill in the IP address of the computer you want to control in the pop-up dialog box.
Then the dot connection is good to go.
If you want to transfer things between your two computers, you need to type mstsc in Start->Run, click Options-> Local Resources on the pop-up dialog box, and select "Disk Drives" in Local Settings
qizilaoda | 2007-12-23
Other. Use QQ's built-in remote control.
It's very convenient for the other party to open the chat dialog box with you and select"Applications","Remote assistance"After you agree he clicks"Application Control"Once you agree again, you'll be able to take control of the other party's computer.
Everyone calls me Kiki | 2007-12-23
To use the remote desktop control in the attachment, just enter his IP and then enter the username and password, and you're good to go.
swty2008 | 2007-12-23
You can use QQ's own remote If you feel that QQ is not convenient enough (you must have 2 people** to operate), you can also use a third-party remote control such as the network of the top of the big name remote.
5942wlr | 2012-06-10
-
Anonymous users2024-02-061. First, connect the two hosts with network cables.
2. Select the folder you want to transfer and right-click on the properties.
3. Then click Share.
4. Then click Share.
5. Then you can see the connected users in the area shown in the box.
6. Then select the computer user who is connected with the network cable.
7. Finally, click Share to automatically share the folder. When Remote Desktop is connected to another computer, you can copy files between the two computers.
-
Anonymous users2024-02-05Sharing permissions are not available to everyone, and the steps to resolve them are as follows:
1. First, find the folder you want to share, and right-click on the properties to enter.
2. Then enter the new interface, click on the sharing option above, and click on the advanced sharing option that appears.
3. Then enter the new interface, find the Share this folder option, and click the previous checkbox.
4. Then on the new interface, click on everyone and grant the relevant permissions in the box below.
-
Anonymous users2024-02-04The problem description is not clear, the local network or what? See if it helps you! The method of using a remote desktop connection is simple, because once connected to the server, it is the same as operating a local computer.
So the only thing to explain is the connection operation. How do I connect to a computer with Remote Desktop turned on? My filial scum needs a remote desktop connection login.
1) Windows XP and 2003 operating systems:
These two systems have the Remote Desktop Connection program stuffed into the attachment, and we can use the Remote Desktop Connection without installing any programs.
Step 1: Start the login process by going to "Start-> Programs-> Attachments-> Communication->Remote Desktop Connection" on the taskbar.
2) Other Windows operating systems:
In Windows 2000 and earlier, the login tool was not included in the attachment, and there were two ways to get the login and realize the connection function of the remote desktop.
Method 1: Use the XP Disc Login - MSRDPCLI
There is a program called the support tools directory under the XP system disc letter, which is actually a remote desktop connection login that runs on a win98 2000 machine under the XP disc directory. The Remote Desktop Connector is automatically installed. The installation process is very simple, just "next" all the way.
After completion, you can log in to the computer on the network with the remote desktop function enabled by "Start-> Program-> Accessories-> Communication->Remote Desktop Connection".
Method 2: Third-party login.
In fact, there are many sites in the network that provide remote desktop login, and we are on the 98 system or 2000 system, which can complete the function of logging in to the remote desktop.
-
Anonymous users2024-02-031.The computer to be controlled needs to be allowed to be connected remotely.
In the My Computer (right-click) property of Remote, in the checkbox Allow users to remotely connect to this computer checkbox.
Click on Select Remote User to add Something Tease Answer Advanced to find it immediately, you can see the administrator account of the controlled computer (you can also create a new user in the user management panel by yourself), choose one.
2.Check the IP address of the controlled computer.
To start running, type cmd and type ipconfig all under msdos
Find the IP address column, and the format is IP address 3Establish a remote connection.
Go control the computer and establish a connection.
Once the connection is successful, enter the username and password for Step 2.
-
Anonymous users2024-02-02Install a connected treasure remote desktop connection software to share files.
-
Anonymous users2024-02-01First of all, make sure that the two computers are connected to a work network, right-click the "Internet Neighbors" icon,—— add Internet Neighbors - Next - Browse - the entire network, select the name of the computer that needs to be connected - OK, and then, share the files in your own computer.
-
Anonymous users2024-01-31It doesn't have to be on the intranet.
1: Shared folder is a folder that can be seen by some people together, which involves permissions, that is, the question of who can see and who can operate it.
2: Shared printer means that multiple people share a printer, which generally refers to the sharing of printers in the intranet.
The application of remote desktop connection is generally available on the internal and external networks, A needs to open the function of remote desktop, and B can directly enter A's IP and user name and password to connect and access.
Tell you a very simple solution,If your TV only has a CCTV interface,No other interface,Then throw that TV,Buy a new one,Don't believe what computer signal can be solved into a CCTV signal。 It's not impossible to do that, our unit is doing it, centralize the signals of all cameras and transmit them, and then use the TV to receive, but the cost is enough for you to buy 4 new TVs (you need an image encoding card, an image integration card, a frequency divider, a signal transmitter, and they are all expensive). >>>More
If not, buy a router, connect the router to the port, and then connect the rest of the machines to the router, use any machine as the host, log in the network card, and then assign IP to all the machines, the specific operation is, select the local connection - > properties - > internert protocol. In fact, the router is a small gateway, and its IP is the default (, the host is set. >>>More
Just buy an ordinary router It's the easiest Other methods have disadvantages After connecting, it's OK to set the IP address and your laptop is a wireless network card.
In fact, the problem is very simple, your memory is only 256MB If you install XP, it needs the minimum memory configuration, which is 256MB, which is the lowest, plus if you install antivirus software, it will also occupy dozens of MB memory, the memory is small, as you can imagine, so opening the IE browser will prompt insufficient memory. The only way to solve the problem is to increase the memory, but according to your configuration, your computer should be relatively old, you should first check how often your motherboard supports memory. What is the maximum memory capacity supported, according to your configuration, if the motherboard can support the maximum memory of more than 512MB, thank God, you check what brand your current memory is, what is his frequency, and then you go to buy the same brand. >>>More
Hello: The telecom multi-function cat does not have the routing function turned on, it is recommended that you can connect a router under the cat, which is more convenient, the connection method is as follows, <> >>>More