Where is the measuring ruler tool for Huawei phones

If you want to measure the length of a straight line, here's how you can do it:

1.Open the Desktop Utilities folder and click AR Measurements.

2.On the AR measurement screen, click Straight Line.

3.Move your phone so that the circle marker is at the beginning of the measurement object, and tap the plus sign to add the starting point.

4.Slowly move the phone so that the circle marks along the edge of the object to be measured until you reach the end point. Tap the plus sign to complete the measurement.

5.The phone will automatically display the results.

Manually drag the end point to fine-tune the measurement results.

Huawei phones. Comes with a ruler in [Utilities]-[AR Measurement], this function uses the AR function of Huawei mobile phones, which can provide four measurement methods: [straight line], [area], [volume] and [height]. After selecting [Straight Line], you can press the [+] button on the interface to determine a starting point, and then press [+] to determine the end point to measure the distance of the straight line.

Here's a closer look:

1. Huawei mobile phones come with a ruler in [Utilities] - [AR Measurement], which can use the AR function to measure distances;

2. At the bottom of the software, there are four functions of [straight line], [area], [volume] and [height], and these four functions need to be moved to find the plane before use;

3. The simplest [straight line] and [height] are to determine a starting point by pressing [+] first, then move the mobile phone, and then press [+] to determine the end point;

4. The volume and area will be a little more complicated, the mobile phone will display the border when it recognizes the object to be measured, and you can click the [+] sign after the border is stable and the object coincides, and the mobile phone will automatically calculate the area;

5. Finally, there is [volume], which needs to be measured according to the above measurement methods, and the volume of the object can be automatically calculated after measuring the area and height of the bottom respectively.

If you want to measure the length of a straight line, you can do so by:

1.On the AR measurement screen, click Straight Line.

2.Point the lens at the plane where the measurement object is located, and slowly move the phone to find the plane.

3.Move your phone so that the bullseye is at the starting point of the object to be measured, and tap the plus sign to add the starting point.

4.Slowly move the phone so that the bullseye moves along the edge of the object to be measured until you reach the end point. Tap the plus sign to complete the measurement.

5.The phone will automatically display the results.

Manually drag the end point to fine-tune the measurement results.

Huawei phones. The measurement function is turned on in **, let's take a look here.

2. At this time, slowly move the phone to find the plane where the object is located, as shown in the figure below.

3. Then click the + sign to add the starting point, as shown in the figure below.

4. Finally, after dragging the target point, as shown in the figure below, the specific data can be displayed.

Huawei mobile phones can measure distances, it has a built-in ruler function, this function is in [Utilities]-[AR Measurement], it can use the AR function of Huawei mobile phones, it can provide [straight line], [area], [volume] and [height] These four measurement methods. After selecting [Straight Line] first, you can press the [+] button on the interface to determine a starting point, and then press [+] to determine the end point to measure the distance of the straight line. You can also take a look at several other measurement methods, at the bottom of the software, there are four functions of [straight line], [area], [volume] and [height], these four functions need to move the mobile phone to find the plane before use; The simplest [straight line] and [height] are to determine a starting point by pressing [+] first, then move the phone, and then press [+] to determine the end point; The volume and area will be a little more complicated, the mobile phone will display the border when it recognizes the object to be measured, and after the border is stable and the object coincides, you can click the [+] sign, and the mobile phone will automatically calculate the area; Finally, there is [volume], which needs to measure the area and height of the bottom according to the above measurement methods, and then the volume of the object can be automatically calculated.

1.Click on the phone to enter the AR measurement.

2.Then click on [Straight Line].

3.After selecting the Line option, locate the object you want to measure.

4.Click the plus sign to create a starting point.

5.Then move the phone horizontally and start measuring.

6.Then click the plus sign to set the end point, which will allow you to see the results of the measurement.

This is very simple,You go directly to the tool that comes with the Huawei mobile phone to measure the length,Open this tool inside,Then let you measure the end point of the tool you are measuring,Then pull it all the way,Then click OK,Then it will light up,But this accuracy is not high,It is recommended that you use a standard ruler to measure a little better。

1.Huawei mobile phones come with a ruler in [Utilities] - [AR Measurement], which can use the AR function to measure distances;

2.At the bottom of the software, there are four functions: [Line], [Area], [Volume] and [Height], which are required before use.

3.The simplest [Straight Line] and [Height] are to determine a starting point by pressing [+] first, then move the phone, and then press [+.].

4.The volume and area will be a little more complicated, and the phone will display a border when it recognizes the object to be measured, and it can be done after the border is stable and the object coincides.

5.Finally, there is [volume], which needs to be measured according to the above.

This requires the phone's built-in depth-detection sensor hardware to support AR measurements. Turn on the mobile phone search function, find "AR measurement" and turn on this function to use. If you don't have this function, it means that your phone does not support this function.

AR measurement, directly open the application market search, open it directly if you have it, and install it first if you don't. After opening, just follow the software prompts to use it, short-distance measurement is OK, and long distance is not OK.

If you use the built-in length measurement tool of Huawei mobile phone, you can read the manual and use it according to the instructions in the manual.

There is the word "ar" measurement in the folder, and you can use it when you find it.

Find the AR measurement, open it and do it literally.

As a result, Du Fu changed it for a long time, and he was waiting for payment in a hurry.

Huawei phones come with a tool to measure length, how to use this tool to measure the length of Huawei phones? I don't know, but I don't know how to use it, look at how you open Baicha and check how Huawei's barbed belt measurement tool is used, you can find out, but Huahua mobile phone is not equipped with measuring tools, if it is really a Huawei mobile phone with a measuring tool, he should bring ultraviolet rays.

Huawei mobile phone dry mountain has a measurement function, open it in the utility. Here's how to measure the function of Huawei mobile phones:

Tool Raw Material: Huawei Mate50. Utilities.

1. Open your phone and click Utilities.

2. Click on AR Measurement here.

3. After opening, you can choose to use the measurement function.

How to use the measurement function of Huawei mobile phones is not in the date:2. Then, slowly move the phone to find the plane where the object is located.

3. Next, click on the sign to add a starting point.

4. Finally, drag the target point to display the specific data.

Utility Toolbox; Sometimes we may have the need to measure the length, so we can use the measurement software that comes with Huawei mobile phones to help meet the simple mapping needs. ** Huawei mobile phones can be found in the system tool [Toolbox], select [Measuring Ruler], and align the object with the mobile phone screen, which will accurately measure the length of the object, which can be accurate to, so how to measure other series of Huawei mobile phones; You can open the [Utility Toolbox], select [Daily Jianfeng Tools], enter the [Ruler], and you can measure the object; That's all for today's **, we'll see you next time.

Here's how to use the Huawei AR measurement tool:

Tool: Huawei P20

Operating system: EMUI

Software: AR measurements.

1. First of all, find a good fight in the mobile phone to "AR measurement".

2. After opening the software. There are 4 types of measurement functions. Measure length, area, volume, height. First of all, look at the measured height, add the positioning point to the foot of the measured person and position it to the top of the head, and the estimated value of the ascending section will appear.

3. Measure the volume of the object. According to the prompts on the screen, aim at the upper surface of the object and slowly move the phone, and it can be automatically recognized.

4. Measure the area of the object. According to the prompts on the screen, aim at the surface that requires side area and slowly move the phone, and it will be automatically recognized.

5. Measure the grinding degree of Changyou. Add a start and end point to display the estimated value of the line directly. So Huawei mobile phones have a length measurement function.