There is an urgent need for a total station how to build its own coordinate system

The process of establishing the coordinate system of the total station is as follows:

1. Select one of the measurement sites to set up a station, set up a total station, and put a prism at the other point;

2. Click on the data acquisition and enter the coordinates and instrument height of the measurement station (that is, the instrument point);

3. Enter the coordinates of the orientation point (that is, the point where the instrument is not set), and the prism can be high or not;

4. The instrument aims at the prism, clicks to measure, and see if there is a big difference between the displayed coordinates and the coordinates of the input point. The difference is too great, repeating the steps;

5. Set the three-dimensional coordinates of the measuring station;

6. Set the coordinates of the backsight point or set the horizontal dial reading of the backsight direction as its azimuth. When setting the coordinates of the backsight point, the total station will automatically calculate the azimuth angle of the backsight direction, and set the horizontal dial reading of the backsight direction as its azimuth angle, and set the prism constant;

7. Set the atmospheric correction value or air temperature and pressure value;

8. The measuring instrument is high, the prism is high and input into the total station;

9. Aim at the target prism, press the coordinate measurement button, and the total station will start to measure the distance and calculate the three-dimensional coordinates of the display measurement point.

It's very simple, first hit two points A and B, site A is set to (X100, Y100, Z100), measure another point B, for example, the distance is 12 meters, the height difference is 1 meter, then the coordinates of point B are (X100, Y112, Z101); That's it!

The simpler way is to pick a point by yourself, set the coordinates by yourself, and take a fixed object near the station as the backsight point (0 direction).

Summary. 1) Take out the total station manual, check the introduction of the format of uploading coordinate data, or refer to the format of the total station to export the coordinate data, so that the coordinate data you want to upload to the instrument is also a coordinate data format that the total station can recognize.

For example, if a total station exports coordinate data in the following format:

Point number, X north coordinates, y east coordinates, h elevation, first column: point number value.

Second column: x-north coordinate value.

The third column: Y east coordinate value.

Column 4: H-elevation values.

In your excel file, delete the "station", "x" and "y" in the header, and also put the "x=" in the data

y=" is also replaced, leaving only the numeric value.

3) Save the file as in excel.

CSV comma delimited files.

4) *The csv comma-separated file extension is changed to *txt text file.

5) Using the total station data transfer software, the coordinate data in the specified format will be *The txt file is uploaded to the total station.

How do I import coordinates into a total station?

1) Take out the total station manual, check the introduction of the format of uploading coordinate data, or refer to the format of the total station to export the coordinate data, so that the coordinate data you want to upload to the instrument is also a coordinate data format that the total station can recognize. For example, if the format of the coordinate data exported by a total station is: point number, x north coordinates, y east coordinates, h elevation, (2) put the coordinate data that needs to be uploaded in excel in the following order:

The first column: the point number value the second column: the third column of the x north coordinate value:

The fourth column of y east coordinate value: h elevation value in your excel file, delete the "station" in the header "x coordinate value" and "y coordinate value", and replace the "x=" and "y=" in the data, only keep the numeric value. 3) Save the file as in excel.

CSV comma-separated file (4) will be saved by *The csv comma-separated file extension is changed to *txt text file.

5) Use the total station data transmission soft leather goods, and the coordinates of the specified format will be keyed *The txt file is uploaded to the total station. 0

Southern NTS-332R6

The main thing is that the format is wrong.

Southern 332R total station data transmission operation process - Baila Xun Tan Du Wen Lun Bump Chang Naiku.

If it is charged, it cannot be opened.

Total Station Measurement Learning: Learn how to use total station coordinates, easy to learn!

Method 1: Qingsen can set the station to 0 coordinates at any point, and then set an azimuth angle to establish an independent coordinate system.

Method 2: Use the rear rendezvous to carry out. For example, if the coordinates of two points are known, the distance between the two points can be known, and one of the points is 0 coordinates, and the other point is 0 or 0 in the east, and an independent coordinate system can be established.