Do pumpkins get more melons the drier they get? Why pumpkins don t bear melons

It's not like that, you still have to have enough water, it will pick up the melon, if it is short of water, it will be a problem to grow, so it will not pick up the melon again.

The drier the pumpkin, the more it will bear fruit, because the drought will cause her to ripen prematurely, and then it will bear more fruit.

It shouldn't be like that.

A species of the genus Pumpkin in the Cucurbitaceae family, an annual creeping herbaceous plant, the stem is often rooted, the petiole is stout, the leaves are broadly ovate or oval, the quality is slightly soft, the leaf veins are raised, the tendrils are slightly thick, monoecious, the fruit peduncle is stout, with ridges and grooves, varies from variety to variety, there are often several longitudinal grooves or none outside, the seeds are numerous, oblong or oblong.

Cultivation techniques. Colonization.

When there are 3-5 true leaves, you can choose robust, disease-free seedlings for planting in the afternoon on a sunny day, 1 plant per pot, and the planting depth should be equal to the cotyledons and water thoroughly. If it is a live broadcast, it is necessary to thin out the sick and weak seedlings and leave 1 seedling in each hole.

Fertilize. About 10 days after planting, 1 time of thin organic fertilizer was sprayed, mainly nitrogen fertilizer. The plant grows rapidly after starting to climb the vine, and the first topping is carried out when there are 8-10 true leaves, which promotes the germination of more side vines, and the scaffolds can be erected in advance.

When the side vines are more than 50 cm long, you can collect young stem tips and petioles for eating, pay attention to keep about 5 leaves, and press the remaining stems and vines with slightly larger soil clods to promote germination and aerial roots. 1 spray of TRIM nitrogen fertilizer after each harvest.

Bracket. When the vine goes around the pot on the soil surface, the stem and vine can be pulled to climb the support, so that the leaves are evenly distributed and the branches do not block each other.

Manage. After a certain stage, the plant enters the flowering period, and the male flowers are mainly male flowers in the early stage, and the male flowers and flower stalks can be picked together with the flower stalks in the morning when the flowers are about to bloom, and they can be eaten. When the female flowers begin to grow, the top dressing organic fertilizer is mainly phosphorus and potassium fertilizer, and the harvest of tender shoot tips is reduced or stopped.

Manual pollination should be carried out by 8 a.m. if necessary. Usually each plant has 3-5 melons can grow normally (1-2 large melons can be left, and micro melons can be appropriately increased, depending on the growth of the plant), too many young melons or female flowers should be thinned, and the stems and vines should be properly topped, so as not to lack nutrients. Larger melons can be hung in a firm place with a net bag, and melons close to the ground can be padded with styrofoam or wooden boards to isolate from the soil.

The main reason why pumpkin blooms but does not produce melon is due to lack of sunlight, or too much nitrogen fertilizer, insufficient pollination of pumpkin and many other factors, resulting in more pumpkin flowers and fewer melons.

Solution: 1. Apply sufficient base fertilizer: pumpkin needs a lot of water and fertilizer to grow, and it is necessary to apply enough base fertilizer when planting to ensure sufficient fertilizer and water supply during the growth period;

2. Timely topping: when the pumpkin vine grows to 2 meters long, remove the growth point on the main vine, so that the main vine grows 3 to 4 side vines, and flowers and fruits;

3. Erection scaffolding: When the side vines grow to 2 meters long, the vines are put on the shelves, so that the light transmission and ventilation conditions can be changed, which can greatly improve the melon sitting rate;

4. Anti-growth: The growth of melon vines will cause less melons, such as cutting a crack at 30 cm from the base of the stem on the vine, and stuffing a small piece of black charcoal, which can inhibit the growth;

5. Auxiliary pollination: Auxiliary pollination is to first cover the female flowers that are about to open and pollinate with melon leaves to prevent rainwater from invading, and at 9 o'clock in the morning of the next day, remove the male flowers on the different plants and cover them on the female flower pants, and then remove them after 2 to 3 days.

Pumpkins bloom after the beginning of autumn and can bear melons. Pumpkin sowing usually starts in March and can be sown in batches until August. The whole growth period of pumpkin is about 95 110 days. In order to improve the fruit setting rate during the flowering period of the melon, artificial pollination can be carried out.

Specific method: Pick off the male flowers that are missing at the beginning of the year and buckle them upside down on the female flowers, so that they can be sold to the powder. Useless male flowers are removed before the end of bloom to reduce nutrient consumption. Do not pollinate the same plant, it can be harvested about 40 days after pollination.

The spring sowing time of pumpkin is 2-early March. Autumn late July and early August. If the autumn pumpkin is in high temperature or rainy during the flowering period, it is easy to pollinate poorly, and it is not easy to set fruits.

The beginning of autumn not only indicates that the hot summer is about to pass, but also that autumn is coming. It also means that the plants and trees are beginning to bear fruit and the harvest season has arrived. Therefore, in the beginning of autumn, there is a custom of sacrificing to the god of the land and celebrating the harvest.

The main reason why pumpkins bloom but do not sit is due to lack of sunlight, or too much nitrogen fertilizer, or it may be that pumpkin pollination is insufficient and many other factors, resulting in more pumpkin flowers and fewer melons.

Measures: 1. Apply sufficient basal fertilizer. Pumpkin needs a lot of water and fertilizer to grow, and it is necessary to apply sufficient basal fertilizer when planting to ensure sufficient fertilizer and water supply during the growing season.

2. Hit the top at the right time. When the pumpkin vine grows to 2 meters long, remove the growth points on the main vine, so that the main vine grows 3-4 side vines, and flowers and fruits.

3. Build a scaffold. When the side vine grows to 2 meters long, the vine is put on the shelf, which can improve the light transmission and ventilation conditions, and greatly increase the melon sitting rate.

4. Prevent the growth of apprentices. If you cut a crack on the vine 30 cm from the base of the stem, and stuff a small piece of black charcoal, you can inhibit the growth.

5. Auxiliary pollination. Auxiliary pollination is to first cover the female flowers that are about to open and can be pollinated with melon leaves to prevent rain from penetrating, and at 9 o'clock the next morning, remove the male flowers on the different plants and cover the female flowers, and then remove them after 2-3 days.

6. Remove the yellow leaves of the pumpkin. On the melon vines that have flowered and fruited, remove the foot leaves and old yellow leaves in time, and remove 30% of the male flowers, which can not only ventilate and transmit light, but also reduce the consumption of nutrients.

7. Bury the stem in the later stage. When pumpkin grows in the later stage, the yield can be increased by 20%-40% by using the adventitious roots grown from the vine nodes and burying the stems. The burial time is carried out after 2-3 batches of fruiting, when some waxy leaves appear in the roots.

Generally, 4-6 knots are buried close to the roots, and the buried stem soil is suitable for fertile soil and mixed with a small amount of organic fertilizer, and it is suitable to be moist. The depth of the buried stem should be 15-25 cm.

I can't be sure what the reason is, I can only say that it is possible.

1. Breed problem.

2. The main bud grows too fast, and there is no nutrient supply to the melon. If this is the case, pinch off the top bud when there is a melon, and the nutrients will be supplied to the melon.

Pumpkin is male and female alienation, to be pollinated artificially, there is a small pumpkin below is a female flower, the other is a male flower, the female flower blooms, the male flower pollen on the stigma of the female flower will bear fruit.

It is best to plant more than two, and when the male flowers bloom, the female flowers also bloom, and then pollinate them by hand.

In addition to the seeds, the seedlings of the southern paw do not bear melons, which is the reason for management. The pumpkin likes light and temperature, there is too much moisture, the pumpkin is in a humid environment, and the vines grow wildly, which affects its fruit set. When the fertilizer effect is too much, the nutrition only grows vines on the spring celebration, and the result only grows vines and does not bear fruit.

In addition, it is necessary to do better in terms of growth density, water and fertilizer management.

Pumpkins are adaptable, you can plant them in a free place, you see in our village, in front of the house and behind the house, the corners are crawling with pumpkin seedlings.

Although the pumpkin seedlings are old and vigorous, and a few yellow flowers have bloomed sparsely, but they just don't bear melons, do you know why? Let's analyze the reasons:

First of all, let's look for the root cause. Probably the cause of the seeds. The pumpkins grown in the village are generally planted with their own seeds, which were left last year and planted this year.

I'm in the countryside and I also planted two pumpkins this year. How did this come about? The pumpkins planted by the eldest mother's family last year grew very well, bore a lot of fruits, and tasted good, so she deliberately left the seeds, not only planted them herself, but also scattered them to the surrounding neighbors.

As a result, some of them bear melons, some of them only bloom but do not bear melons, and some are even more excessive, and even the flowers are not the same as the melons that bear on the vine.

Today's pumpkin seeds are generally hybrid seeds, which are only suitable for one generation and are not suitable for keeping for oneself as seeds.

If the second generation is planted, the seeds are prone to mutation, the quality of the pumpkin will be greatly reduced, and the yield may also be reduced。Of course, it is also possible not to bear melons.

If you want to grow pumpkins that grow well and bear many fruits,We also get regular seed companies to buy regular seeds, and the first generation of seeds is the best。Generally, it is counterproductive to choose seeds with full grains, no damage and no mildew, and it will be counterproductive to buy fake seeds.

In addition to seeds, it is the management aspect. Pumpkins like light and temperature, and under the right conditions and environment, pumpkins can bear a lot. It is extremely adaptable, drought-tolerant, and does not have much demand on the soil, but is preferably in fertile, neutral or slightly acidic sandy loam soils.

First, the pumpkin vines grow too densely. This year's rain is abundant, the pumpkin vines grow very luxuriantly, the number of forests leads to too dense, the light can not penetrate, and the permeability becomes poor, which affects the normal growth of pumpkins.

Solution: Remove the old leaves and yellow leaves on the vines in time, so that the pumpkin has sufficient light, so that the permeability is better, and unnecessary nutrient consumption is reducedIncreasing its light duration not only reduces pumpkin pests and diseases, but also promotes pumpkin to produce more melons.

SectionSecond, the irrationality of water and fertilizer management. There was too much water, the pumpkin was in a humid environment, and the vines grew wildly, affecting its fruit set. When the fertilizer effect is too much, the nutrients only grow on the vines, and the results only grow vines but do not bear fruit.

SolutionSolution: Pumpkin is very adaptable, and reasonable water and fertilizer can be fine, on the contrary, too much water and fertilizer will affect pumpkin melon.

In short,If the pumpkin wants to solve the problem of growing and not bearing melons, we have to find the cause from the roots.

In addition, it is necessary to do a better job in terms of growth density, water and fertilizer management, according to the solution, to prevent light vines and not melons, so that pumpkins not only bear more, but also produce better!