Can I still use the air conditioner by soaking in water? Will the outdoor unit of the air conditione

Do you want to see if it is seriously soaked? If only the bottom of the air conditioner is soaked in water, it has little impact on the air conditioner, if the entire outside unit is submerged, then you need to check and repair the outside unit, and confirm that there is no problem before you can send the power to turn it on.

If the depth of soaking water exceeds the position of the compressor terminal, it will cause the compressor to burn out completely, and even cause other types of major failures of the air conditioner. And even if the water immersion depth does not exceed this height, it will cause dirt and dirt on the bottom part of the surface area of the heat exchanger of the outdoor unit of the air conditioner.

The general air conditioner is waterproof and sunscreen, but there may be certain problems with the soaking water, generally speaking, the manufacturer has done a good job of sealing the electric control board, if even the rain can not be prevented, the quality control at the time of delivery is still not in place.

1. Accessories problems, some connecting lines and other accessories will leakage and short circuit under the rain washing, which will also lead to the failure of the air conditioner to operate.

2. It is also the most common situation, that is, there is a problem with the connecting pipe of the internal and external units of the air conditioner, and cracks will appear in the connecting pipes of the internal and external units after the strong rainstorm, resulting in the leakage of refrigerant liquid, so that the air conditioner cannot be refrigerated normally when it is turned on. If there is really a problem with the soaking water, you can only find a maintenance person to repair it.

Air conditioners are commonly used household appliances in summer, and with air conditioners, you can enjoy the cool breeze. After the air conditioner has been used for a long time, it is inevitable that there will be some failures, so it is necessary to repair it in time, otherwise it will damage the air conditioner itself. For example, if the outdoor unit of the air conditioner is flooded, it is necessary to check what causes the water ingress in time.

Next, let's take a look at what to do if the air conditioner is flooded, will the air conditioner be broken if the water enters the air, and what is the impact of the air conditioner after the water is inside, I hope it can help you.

1. What should I do if the air conditioner is flooded?

1. Check whether the condenser and evaporator need to be cleaned after the outdoor unit of the air conditioner enters the water, because if there is more dust attached to it, it will affect the effect of heat exchange.

2. If there is water inlet into the outdoor unit of the air conditioner, you can check whether the suction port of the outdoor unit is blocked by debris, if there is debris obstruction, it will affect the heat dissipation, resulting in excessive load of the compressor and shortening the service life.

3. Water ingress into the outdoor unit of the air conditioner may be a problem with the drainage pipe, if the drainage pipe is aged or bent, the drainage will have a problem, resulting in water ingress into the outdoor unit.

2. Will the air conditioner be broken if water enters the unit?

1. The outdoor unit of the air conditioner will be damaged if water enters, because the parts inside the outdoor unit have not been waterproofed, and the parts may rust or be damaged after water ingress.

2. The outdoor unit of the air conditioner has been waterproofed, and the waterproof level is IPX4, so if it rains, there is no need to worry about rainwater flowing to the outdoor unit, because the rainwater will flow down the outdoor unit and generally will not enter the inside of the outdoor unit.

3. If the heat sink in the outdoor unit of the air conditioner is too dirty, it needs to be cleaned, but the water cannot be poured directly into the outdoor unit, otherwise the water will flow into the fan motor bearing, which may lead to poor lubrication.

4. Although the outdoor unit of the air conditioner has a waterproof function, it can not soak the outdoor unit in water, if it is accidentally soaked in water, it can be placed in a ventilated place to dry it, and then start it to try whether it can be used.

3. What is the impact of water ingress into the air conditioner's external unit.

1. What is the impact of water ingress into the outdoor unit of the air conditioner depends on the degree of water ingress, if only a small amount of water drops into the outdoor unit, it will not have any impact on the outdoor unit of the air conditioner.

2. If a large amount of water enters the outdoor unit of the air conditioner, it may damage the parts inside the air conditioner, and if the damage is serious, the parts need to be replaced.

3. When the outdoor unit of the air conditioner is installed, it should be installed in a place with good ventilation and convenient maintenance, and cannot be installed in the balcony, otherwise the ventilation and heat dissipation will be poor and the refrigeration capacity will be reduced.

4. The outdoor unit of the air conditioner is generally heavier, if it is hung on the external wall, pay attention to whether the wall is firm and whether it can bear the weight of the outdoor unit.

5. If you want to prevent water from entering the outdoor unit of the air conditioner, you can install a baffle on top of the outdoor unit, so that most of the rainwater can be prevented from entering the outdoor unit.

Yes.

If there is a short circuit in the electrical components of the outdoor unit of the air conditioner after soaking in water, or some electrical components of the outdoor unit fail, the fan motor of the outdoor unit will be short-circuited due to blisters.

The outdoor unit of the air conditioner has been waterproofed, and the waterproof level is IPX4, so if it rains, there is no need to worry about rainwater flowing to the outdoor unit, because the rainwater will flow down the outdoor unit, and generally will not enter the inside of the outdoor unit.

Precautions for air conditioner installation.

The installation position of the air conditioner should not be too low: the air conditioner is hot air above, and the cold air is below, and the hot air above is discharged when the air conditioner is operating, and the refrigeration effect has been achieved. Therefore, the position of the air conditioner installation should not be too low, a little above the wall, and it is suitable.

Air conditioning wires should be suitable: air conditioners generally have a large power, and high-power wires are needed to load the operation of the air conditioner.

Air conditioning should be installed horizontally: in order to ensure the refrigeration effect and smooth drainage, the installation of air conditioning is generally horizontal, and it will produce a lot of noise if it is uneven, so it can be slightly inclined to the drain port to facilitate drainage.

The above content refers to People's Daily Online-Before turning on the household air conditioner, open the doors and windows for ventilation for 20 to 30 minutes.

If the water does not invade the inside of the external fan, it will not be damaged, and even if it does, you can use it after a few days of natural air drying.

This has to look at the depth, you can not submerge the compressor, the general fan motor is the lowest, you can see for yourself, you can not flood the fan motor, the circuit is generally above the compressor, and the bottom is full of copper pipe heat dissipation parts.

Effect of blisters on the outdoor unit of the air conditioner:

1. It will cause a short circuit in the electrical components of the outdoor unit due to blisters;

2. Some electric components of the outdoor unit will fail due to blister sludge;

3. It will cause a short circuit in the fan motor of the outdoor unit due to blisters;

Solution: 1. Clean up the debris caused by blisters in the outdoor unit.

2. Remove the stagnant water in the electrical part of the outdoor unit, and replace the relay if there is one.

3. Turn on the fan motor of the outdoor unit, clean up the stagnant water and debris and re-spray the insulating paint.

Fourth, use the shake meter to detect the interphase insulation value and the ground insulation value, at least need to reach more than 2m after the completion of vacuuming, pressure testing, leak detection, and translumination of refrigerant.

Because the general air conditioner outdoor unit has a waterproof function, the waterproof function is relatively strong, if it is not a serious water ingress, it can still be used. If the water ingress is too severe, it will cause damage to the parts, then it will be very troublesome, and the entire air conditioner needs to be repaired. 1. Because the outdoor unit of the air conditioner is placed outdoors, there will be water ingress when it rains, but this is not a big problem, and the external unit of the general air conditioner has a waterproof effect.

However, if there is too much water, it will be more troublesome. 2. If there is not a lot of water seepage from the outside unit of the air conditioner, there should be no big problem with the outside unit, because it itself has a waterproof function. 3. If the water ingress more than half of the parts of the external unit, it will be damaged, do not start the air conditioner at this time, cut off all the power supply of the air conditioner, and should not expose the air conditioner.

The air conditioner should be taken to a professional repair location for repair, and do not deal with it yourself, so as not to cause greater damage. 4. Therefore, if the air conditioner is placed outdoors, there will definitely be some water ingress problems, generally speaking, we will do a good job of waterproofing, and the air conditioner itself has a certain waterproof ability, if the water is not much, the air conditioner is no problem at all, but if there is too much water, the air conditioner. There will be some failures, so it is better to design a cover to block the air conditioner in the place where the outdoor unit is placed to avoid too much water from entering, causing the air conditioner to not start normally.

After the air conditioner is soaked in water, it is generally prone to failure, so it is best to find professional personnel to test and repair it, and replace the broken parts in time, so as to achieve a more ideal safe use effect.

If the air conditioner is soaked in water, I think it can be used normally, and the design of the air conditioner is that it can be used normally and operate normally on rainy or snowy days, so there is no problem with blistering.

After soaking in water, as long as the water is cleaned up, it can still be used, if it cannot be used during the process of soaking in water, it will cause a short circuit.

Hello! The outdoor unit of the air conditioner is generally waterproof, and you can try it on.

If you soak in water, you can see if he is bad, and if it is broken, it can't be used.

How can the outdoor unit of an air conditioner be soaked in water? People are put outside, it is best not to let it rain when it rains, some people have deliberately made a rainproof on the air conditioner, this canopy, so that he can avoid receiving too much water and rain!

Look at the degree and height of the flood.

If the height of the outdoor unit, fan motor or compressor junction box exceeds the height of the outdoor unit, the air conditioner cannot be used. It is necessary to find a professional air conditioner maintenance personnel to come and conduct a thorough inspection of the air conditioner compressor, fan motor and other electrical parts of the outdoor unit to make sure that there is no damage.

The air conditioner can only be used normally if there is no damage to the electrical components.

Can the indoor unit of the air conditioner be used if it is blistered, hello dear, Weila! <> can't be transported in Changshan. There will be a short circuit in the motor, but this is normal.

Being blistered will cause a short circuit in the electrical components of the outdoor unit due to blisters; It will also cause some electrical components of the outdoor unit, such as the fan motor, to fail due to blister silt. Solution: 1. You can clean up the debris caused by blisters in the outdoor unit first.

2. Then try to remove the water in the electrical part of the outdoor unit, if it is a relay, then the resistant beam needs to be replaced to ensure that it can be used normally. 3. Then turn on the fan motor of the outdoor unit, clean up the stagnant water and debris and re-spray the insulating paint to ensure that the insulating paint is airtight. 4. Finally, use the shake meter to detect the interphase insulation value and the ground insulation value, which needs to reach at least 2m.