Does the Southeast DX3 have an automatic transmission?

Definitely, probably CVT (continuously variable transmission), which should be seen at the Beijing Auto Show at the end of the month.

Hello, no, right...Hope mine can help you.

Southeast DX3 automatic transmission ** between 10,000 to 10,000, the Southeast Mitsubishi DX3 model is still very good, my brother bought an orange one, used it for 3 months, I heard that the sound insulation of the vehicle is very good, fuel consumption is not high, the interior is also very textured, it should be regarded as the leading model in the independent brand, I hope it can help you!

DX3 is a small and two power options for young first-time buyers, matched with a 5-speed manual transmission and a third-generation 8-speed CVT automatic transmission from Belgium, a total of 6 models to meet the needs of different drivers. In terms of body color, there are as many as 8 fashionable car colors to choose from, and there are more personalized two-tone Jincai models to further meet the needs of consumers with more diverse personality choices.

In addition to the surprise pre-sale of 10,000 yuan**, for people who plan to buy a car in installments, Southeast Automobile has intimately formulated an interest-free financial policy to greatly reduce the threshold for car purchase. 40,000 fixed amount loan, 12 installments can enjoy the "0 interest rate" discount, easy to buy for the first time, Yan strength DX3 loan immediately.

Southeast DX3 pre-sale price.

Model pre-sale price (10,000 yuan).

5MT Deluxe 10,000.

5MT Premium 10,000.

5MT flagship 10,000.

CVT Deluxe 10,000.

CVT Premium 10,000.

CVT flagship 10,000.

I asked the manufacturer, it is a manual gearbox, a domestic gearbox, the full name is Zhuzhou Gear Factory.

Maintenance of automotive functional parts.

1. Check the engine oil level.

Park your vehicle on a level pavement. Pull out the vernier ruler to check the oil level, if the oil shine is within the two reticle lines (f) and (l), it is within the normal range, if it is lower than (l). Then the specified type of oil should be added, and the liquid level after refueling should not be higher than (f).

2. Engine coolant level inspection.

Never open the radiator cover when the engine is in a hot state, otherwise you may be scalded by splashed coolant or hot vapors. After the engine is cooled, check that the liquid level of the coolant should be between full and low, otherwise distilled water or pure water (mineral water cannot be added) or refrigerant should be added, and the liquid level height after adding water should not exceed the full level. If you find that the coolant is reduced quickly in a short period of time, you should check the cooling system for leaks or go to the repair station to check.

3. Check the brake fluid level.

If the braking is also between the high and low positions, it means normal. If the brake fluid is close to or below the lower limit, it means that there may be a leak in the system or excessive wear of the brake shoes, and you should go to the repair station for maintenance in time.

When adding brake fluid, pay attention to adding the same type of brake fluid to prevent damage to the leather bowl, and pay attention to protecting the paint to prevent corrosion.

Fourth, the clutch master pump liquid level inspection.

If the clutch level is between high and low, it means normal, if it is below the standard line, it may be that the main cylinder or sub-pump bowl is damaged. In the engine running state, it will be difficult or impossible to engage the gear, please go to the nearest maintenance station for maintenance.

5. Maintenance and inspection of the battery.

Check whether the battery is firmly fixed, the electrolyte should be between the upper and lower limits, and the electrolyte or distilled water should be added to the high line in time when it is close to the lower line. Keep the positive and negative cables of the battery in good contact, and keep the battery clean and dry. Vehicles that have been placed for a long time should take off the positive and negative cables of the battery, rewire and start the engine about 20 minutes after about half a month, and charge it in time if the power is obviously insufficient.

6. Inspection of tires.

The tire pressure should be checked at room temperature every month, and if it is lower than the normal standard, the tire pressure should be replenished in time. The air pressure should not be too high or too low, otherwise it will affect the safety of driving.

Check the cracks of the tires, and replace the tires in time when there are potential safety hazards.

When choosing tires, they should be of the same type.

7. Inspection of belts.

When starting the engine or driving the vehicle normally, the belt sounds, one situation is that the belt has not been checked and adjusted for a long time, and it can be adjusted according to the normal standard. Another situation is that the belt is aging and needs to be replaced.

That factory doesn't produce anymore, I've hit **.

Southeast DX3 is good-looking, cost-effective, and trustworthy!

Someone asked the manufacturer, manual gearbox, domestic gearbox. The full name is Zhuzhou Gear Factory.

Domestic, the brand is Zhu Chi's, but not these two words.

If you don't consider the financial problem and the body form, the workmanship of the Audi brand will be significantly better than that of the Sutar, and in terms of technology, the semi-automatic parking of the A3 is a technical highlight.

The Southeast DX3 uses the third-generation 8-speed CVT intelligent transmission of the Belgian Bunch.

Punch Power's CVT transmission product lineup mainly includes VT1, VT2, VT3 and VT4 products, with the maximum torque range covered. Among them, VT1 has gone into history. The VT2 and VT3 are based on the front-wheel drive of the transverse engine, and the VT2 has a maximum torque of 186 and the VT3 has a maximum torque of 220.

At present, the small-displacement models of domestic independent brands are equipped with Punch's VT2 series, such as Southeast DX3, Haima 3 and so on.

Advantages and disadvantages of CVT gearbox:

Compared with AT, the biggest feature of CVT is fuel saving, high transmission efficiency (in the case of smooth throttle), smooth power output, especially suitable for household use. The disadvantage is that it is limited by the design structure, the transmission steel belt is easy to slip under high speed difference (such as sudden throttle to the end) and causes power loss, at this time, the transmission computer will limit the power output to protect the gearbox, the result is that there is no response to a foot of oil, or slow speed, so it is not suitable for high-torque engines and fierce driving, that is, as the saying goes, it is not resistant, and the failure rate is higher than that of the same level in the same period.

The all-new Southeast DX3, Mitsubishi Speed CVT, with rear independent suspension, preferential tax price from 10,000.