window10 notebook how to restore factory settings

Tools Raw materials.

Win10 computer.

Steps: 1. Open the "Start Menu" in the lower left corner of Win10 and select [Computer Settings].

2. After entering the computer settings, click to enter the [Update and Restore] settings at the bottom of the left side.

3. Then in the win10 update and restore settings, select [Restore].

4. Next, click [Start] under "Delete everything and reinstall Windows".

5、It should be noted here that you need to use the image file of the previous installation of win10,Because the computer was installed using a USB flash drive,The image files are all in the USB flash drive,And win10 factory reset needs to use the files in the copy image,So it will prompt:"Missing some files"。

6. After that, insert the USB flash drive that installed win10 into the computer, and restore the operation again, then you can see the following "initialization" settings, and then click [Next].

ps.If you have the previous win10 system image file in the computer, you don't need to insert the USB flash drive where win10 is installed.

7. Next, you will enter the "Computer has multiple drives" setting option, there are two options: [Install window drives only] and [All drives], which can be selected according to your own situation. Generally, select [Install window driver only] in the first item.

8. There are some other options to choose from, just follow the prompts to select. Finally, you will enter the [Ready, you can initialize the computer] prompt, click [Initialize] and you're done.

9. Finally, the computer will automatically restart, and after restarting the computer, it will enter the "Resetting the Computer (Progress Percentage Prompt)" interface, which will take a long time, and will automatically restart 2 times during the period. If you're a laptop user, it's a good idea to make sure the battery is fully charged or connected to a power adapter. After waiting for a long period of time,win10 can be successfully restored to factory settings,Finally enter the system settings interface,Here is the same as the initial setting of the newly installed win01,You can enter the new win10 interface after the setting is completed。

Open the "Start Menu" in the lower left corner of Win10 and select [Computer Settings] as shown in the figure below.

After entering the computer settings, we click to enter the [Update and Restore] settings at the bottom of the left side, as shown in the figure below.

Then in the Win10 update and restore settings, select [Restore], as shown in the following interface figure.

Next, we click [Start] under "Delete everything and reinstall Windows", as shown below.

It should be noted here that the image file of the previous installation of win10 needs to be used here, because the computer was previously installed with a USB flash drive, the image files are all in the USB flash drive, and the WIN10 factory reset needs to use the files in the copy image, so it will prompt: "Some files are missing", after that, insert the USB disk that installed win10 into the computer before, and restore the operation again, and then you can see the following "initialization" settings, and then we can click [Next].

The "factory reset" of the computer is actually a one-click system restore. This kind of function is related to the brand and model, and it is best to check it directly on the official website, and there will be relevant information.

1Tap the "Start" button in the bottom left corner.

2. Click "Settings" - "Update & Security" "- Recovery" - Reset this computer "- Start". (If you can't enter the system, you can also try to force shut down twice, and the third boot will automatically enter the Windows RE repair environment).

3. Choose the right option according to your personal needs. Keep My Files: Delete apps and settings, but keep your personal files.

Delete Everything: Delete all personal files, apps, and settings.

4. Select Keep My Files, and you will be prompted to delete the list of apps for later reinstallation.

If you have more than one partition or drive.

You can choose whether to reset only the drive where the Windows system is located or all drives. Choose whether to "delete my files only" or "delete files and clean drives" according to your needs

A factory reset can be done in the following ways:

Note: Please back up your important personal data before factory reset.

Click the "Start" button.

Click the "Settings" button.

Click on the "Update & Security" button.

Tap "Recover" and then select "Reset this computer".

Click "Start".

Choose the right option according to your needs.

Finally, wait patiently for the configuration to be completed, and then the factory reset can be completed.

1.Open "All settings" on your computer and tap "Update & Security".

2.Click "Restore" in the menu bar and click "Start" in the reset this computer.

A factory reset will delete all the data on your computer, as follows:

1.Click the Start button and select "Settings".

Please click Enter a description.

2.Once you're in Windows settings, turn on Update & Security.

Please click Enter a description.

3.Find and tap on the "Recover" button.

Please click Enter a description.

4.In the Update & Security tab, click "Start" under the Reset this PC option on the right.

Please click Enter a description.

5.After that, the initialization wizard box pops up, and you can restore the factory settings according to your own needs and the steps prompted by the computer, and wait for about half an hour for the system to recover.

Please click Enter a description.

Laptop factory reset, each brand is different, you can go to the brand's official website, contact after-sales customer service, and ask them to guide you to restore factory settings.