How do I adjust the rearview mirror of my car? How to adjust the rearview mirror of the car

A normal driver can see about 200 degrees left and right in front of him without looking back, in other words, about 160 degrees is invisible, so we must treat our good helper - the rearview mirror.

Specifically**rearview mirror, adjust the left and right positions to the left edge of the mirror just to cut to the right ear of your image in the mirror, which means that in general driving situations, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon in the mirror**.

Next is the left side mirror, which needs to be placed in the upper and lower positions to put the distant horizon in **, and the left and right positions are adjusted to 1 4 in the mirror range occupied by the body.

Because the driver's seat is located on the left side, so the driver's grasp of the right side of the car ear is not so easy, coupled with the need to sometimes stop on the side of the road, the ground area in the right rearview mirror when adjusting the upper and lower positions should be larger, accounting for about 2 3 of the mirror surface. The left and right positions are also adjusted to the body occupies 1 4 area.

When driving at high speeds, the driving school may have more blind spots than you expected, but it is not something that can be covered by just three rearview mirrors, so whether you are switching lanes or turning left and right, you should pay more attention to the rearview mirror!

Carefully grasp the above points, your driving is not harmful, and finally a wordy sentence, you must regularly check the road conditions through the rearview mirror during the road test, otherwise, the examiner will judge that there is a lack of awareness of safe driving school.

First, the driver sits in the driver's seat and finds the electric knob on the left door. Look at a white dot on the knob and the letter next to the knob: "L."', for the left rearview mirror, and "r" for the right rearview mirror.

To adjust the angle of the left side mirror, turn the adjustment knob white point to the "L" position.

Lift the knob up and change the angle of view of the rearview mirror upwards. In the same way, the knob is pressed down, and the angle of view of the rearview mirror changes downward. To the left, to the back, use the same method of pulling the knob.

To adjust the angle of the right mirror, turn the adjustment knob white point to the "R" position.

Same as step 3. Lift the knob up and change the angle of view of the rearview mirror upwards. In the same way, the knob is pressed down, and the angle of view of the rearview mirror changes downward. To the left, to the back, use the same method of pulling the knob.

I'm an old driver. In my personal experience, the rearview mirror is usually adjusted up to 10-15 degrees, and then the two sides are adjusted to be able to see things beyond the two sides of the rear of the car.

The first step is to pay attention to the point to see, the second step is to distinguish between the safe distance and the uneasy distance, and the third is to observe more.

Get in the driver's seat of the car, adjust your body position, and find a position that you feel most comfortable and easy to drive, and this sitting position must be able to easily step on the accelerator and brake.

The first adjustment is the left rearview mirror, the left rearview mirror up and down position adjusted to see the sky and the earth from the rearview mirror in half, the left and right position adjusted to the body occupies about a quarter of the left rearview mirror.

The left and right positions of the right rearview mirror are also occupied by the body in a quarter, the difference is that the right rearview mirror occupies two-thirds, and the sky only occupies one-third.

Because the driving position is on the left side of the car, the line of sight is somewhat off, and only the rearview mirror adjusted to this state can see the car on the right.

Step 1 Adjust** the mirrors.

The left and right positions are adjusted to the left edge of the mirror surface just to cut to the right ear of their image in the mirror, which means that in general driving situations, they can't see themselves from the **rearview mirror, and the upper and lower positions are to put the distant horizon on the mirror surface**.

**Rearview mirror adjustment essentials: horizontal swing in the middle, ear on the left. The distant horizontal line is placed horizontally in the midline of the **rearview mirror, and then moved left and right, and the image of your right ear is placed on the left edge of the mirror.

Step 2 Adjust the left side mirror.

When dealing with the upper and lower positions, the distant horizon line is set to **, and the left and right positions are adjusted to 1 4 of the mirror range occupied by the body.

Adjustment essentials for the left side mirror: Place the horizontal line in the center line of the mirror, and then adjust the edge of the body to occupy the mirror image 1 4.

Step 3 Adjust the right side mirror.

Because the driver's seat is located on the left side, so the driver's grasp of the situation on the right side of the car is not so easy, coupled with the need to sometimes park on the side of the road, the right side of the rearview mirror should be left larger when adjusting the upper and lower positions, accounting for about 2 3 of the mirror. As for the left and right positions, it is also adjusted to the body occupies 1 4 mirror area.

Adjustment essentials for the right side mirror: Place the horizontal line in the 2 3 position of the mirror, and then adjust the edge of the body to 1 4 to occupy the mirror image.

Xiao Kun said that the car, so that you don't have to worry about driving the car!

Xiao Kun said that the car, so that you don't have to worry about driving the car!

**Rearview mirror adjustment: the left and right positions are adjusted to the left edge of the mirror, cut to the right ear of their image in the mirror, under normal circumstances, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon on the mirror surface**, the adjustment essentials are: horizontal pendulum in the middle, ear to the left, that is, the distant horizontal line is placed horizontally in the midline position of the rearview mirror, and then move left and right, put the image of your right ear on the left edge of the mirror;

Adjustment of the left side mirror: the upper and lower positions are to put the distant horizon in the **, and the left and right positions are adjusted to the body occupies the mirror range of 1 4;

Adjustment of the right side of the rearview mirror: because the driver's seat is on the left side, so the driver is difficult to grasp the situation on the right side of the body, therefore, the ground area of the right side rearview mirror should be larger when adjusting the upper and lower positions, accounting for about 2 3 of the mirror area, and the left and right positions are also adjusted to the 1 4

Precautions. To eliminate the blind spot of the line of sight, should try to adjust the left and right rearview mirror outward or downward, in fact, this is a misunderstanding, under normal circumstances, the driver only turns his eyes and does not look back, he can see the range of about 200 degrees in front of him, and the range of about 160 degrees is not visible, in fact, after using the left and right rearview mirror and ** rearview mirror, it can only provide an additional 60 degrees or so of the visual range, and the remaining 100 degrees can only be solved by the driver looking back, Although many new cars are now equipped with double-curvature mirrors, this only expands the viewing angle of the left and right mirrors, and still does not fully cover all areas.

Since most of the interior mirrors on the market are smaller, it is recommended that you go to the car boutique to buy wide-angle rearview mirrors, although the curved design of the interior mirrors reflect a large range, but there are distortion of the distortion of the distortion, so it is advisable to buy a flat mirror to avoid dizziness.

The rearview mirror is a tool for the driver to directly access external information such as the rear, side, and bottom of the car while sitting in the cab seat. In order to facilitate the driver's operation, prevent the occurrence of driving safety accidents, and ensure personal safety, all countries have stipulated that rearview mirrors must be installed on the car, and all rearview mirrors must be able to adjust the direction.

1. First of all, you must adjust the driver's seat to the most comfortable driving position, and then you can adjust the rearview mirror. In order to cope with the test, many driving schools tell students how to adjust the rearview mirror must be applicable to the real road surface. We have sorted out a more reliable rearview mirror adjustment method, and the rearview mirror can be adjusted to reduce blind spots and reduce the risk of driving.

Adjustment of the left side mirror: the upper and lower positions are to put the distant horizon in the **, and the left and right positions are adjusted to the body occupies the mirror range of 1 4;

2, the adjustment of the mirror because the driver's seat is on the left side, so the driver is difficult to grasp the situation on the right side of the body, therefore, when the right rearview mirror adjusts the upper and lower positions, the ground area should be larger, accounting for about 2 3 of the mirror area, and the left and right positions are also adjusted to the 1 4 of the body occupying the mirror range.

3. Adjustment of the mirror The left and right positions are adjusted to the left edge of the mirror, cut to the right ear of the image in the mirror, under normal circumstances, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon on the mirror surface**. The key points of adjustment are: horizontal pendulum in the middle, ear to the left, that is, the distant horizontal line is placed horizontally in the middle line of the rearview mirror, and then move left and right, and put the image of your right ear on the left edge of the mirror.

Before adjusting the mirrors, we must adjust the position of the seat and steering wheel. The basic principles for adjusting the seat are to sit comfortably, have a clear view and have a comfortable steering wheel.

Each car is equipped with three rearview mirrors, namely the left side mirror, the right side mirror, and the ** rearview mirror. Most cars are equipped with anti-glare rearview mirrors to prevent the glare caused by the strong light of the rear vehicle when driving at night. The exterior mirrors equipped with high-end cars also have an electric defogging function and a curved surface design, so that they can seek a larger angle of image space while being clear.

How to adjust your car mirrors:

Adjustment essentials for the left side mirror: Place the horizontal line in the center line of the mirror, and then adjust the edge of the body to occupy the mirror image 1 4.

Adjustment essentials for the right side mirror: Place the horizontal line in the 2 3 position of the mirror, and then adjust the edge of the body to 1 4 to occupy the mirror image.

**Rearview mirror adjustment essentials: horizontal swing in the middle, ear on the left. The distant horizontal line is placed horizontally in the midline of the **rearview mirror, and then moved left and right, placing the image of your right ear on the left edge of the mirror.

The adjustment method of the rearview mirror is incorrect, which can easily lead to the appearance of blind spots and cause accidents. Next, I will teach you how to adjust the rearview mirror correctly, but you should remember it well. In life, it is common to encounter the results of two types of adjusting the rearview mirror.

First, the overlap angle of the inner and outer rearview mirrors is too large, resulting in a narrow field of vision. The second is that the blind spot angle of the internal and external rearview mirrors is too large, resulting in a blind angle of vision.

In both cases, there will be hidden dangers in the process of driving.

Left mirror adjustment.

The left exterior mirror adjustment should be half of the top and bottom, that is, the ratio of 1:1 between heaven and earth, left 3 4 right 1 4 (1 4 area close to the body), you can see the door handle of the rear door.

Right mirror adjustment.

Because the right side is farther away from the driver, the right side of the exterior mirror adjustment is slightly different from the left side, the right side of the mirror adjustment should be up 1 4 down 3 4, left 1 4 right 3 4 (1 4 area close to the body), you can see the door handle of the rear door.

**Rearview mirror adjustment.

**Three points should be paid attention to when adjusting the rearview mirror: first, the right ear is visible on the left edge of the mirror; Second, the entire rear windshield is in the inner mirror; Third, the ratio between heaven and earth in the distance is 1:1.

Proper adjustment of the rearview mirror is really important for safe driving. Friends must remember!

The function of the rearview mirror: in order to observe the movement of vehicles and personnel behind and on the side of the car during driving, so as to ensure safe driving. Of course, the vehicle has its occupied area, so that the blind spot blind spot is formed, and the reasonable adjustment of the up, down, left and right angles of the rearview mirror, one is to reduce the blind spot to the smallest range.

At the same time, it is particularly important for reversing, especially for the second subject exam, and reasonable adjustment of the angle of the rearview mirror will help to keep up with the distance between the roadside and the body and the situation behind the car, and to see the points and lines on the field.

Correct mirror position.

How should the three mirrors located on the left, right, and windshield** be adjusted? The first is the old saying, first adjust the standard sitting posture (which has been introduced in the previous part), and then adjust the mirror.

In the subject 2 exam, the most important thing is to control the speed of the car and see the points and lines on the field, as long as you do these two points well, you can basically pass. The most important thing to look at the dots and lines is through the use of reflectors on the basis of the standard sitting position, so adjusting the rearview mirrors is crucial to the success of subject 2 training and exams. So how do you adjust the rearview mirror in subject 2?

1. **Rearview mirror: The left and right positions are adjusted to the left edge of the mirror surface just cut to the right ear of the image in the mirror, which means that in general driving conditions, you can't see yourself from the **rearview mirror, and the upper and lower positions are to put the distant horizon on the mirror.

Second, the left side mirror: the upper and lower positions are to put the distant horizon in the first place, and the left and right positions are adjusted to the proportion of the body occupying a quarter of the mirror range.

Third, the right side of the rearview mirror: because the driver's seat is located on the left side, so the driver to the right side of the car ear is not so easy, coupled with the need for roadside parking sometimes, in the right side of the rearview mirror in the adjustment of the upper and lower position of the ground area to be larger, accounting for about two-thirds of the mirror area. The left and right positions are also adjusted to a quarter of the mirror.

How to adjust the rearview mirror, whether it is a driver's license or a daily driving on the road, is a very important skill. Only by mastering this skill can you be safer when driving on the road and avoid potential safety hazards.