I already wanted to transfer 3 basic boot files from the C drive boot into DOS but

I would like to say about the landlord's question:

As soon as you enter the DOS, all internal commands should be usable. For example: DIR, CD, COPY, etc.

However, if it is an external command, you should make sure that you have the command on your machine, that the directory where the command is located is the current directory, or that you have used the path command to retrieve the directory where the command is located.

If, as I said upstairs, your commands are in C: Windows Command, I suggest you add this line of commands to this file:

path c:\windows\command

In this way, every time you start DOS (not in Windows using "Reboot and Enter MS-DOS" to enter) the system will automatically retrieve the C: Windows Command directory, and you only need to enter the relevant command directly after entering DOS.

Personal opinion, if there are any questions, you can add me to it. Knowing everything, saying everything. Share!

Format is an external command, and there must be corresponding files on the disk when executed, that is, in Windows 98, all the files corresponding to the external command are stored in the Windows Command folder. Disks in format format can only be used as system disks, and you can also use the sys command to transfer them directly.

The average person doesn't seem to have this technology;

It is recommended that other machines install dwarf DOS, start and enter under DOS, find the ghost on the book and restore it to the C area on the book.

You can format it directly from your desktop computer. Why don't you move back into your books?

If you change the hardware, then this interface is normal, redo the system to solve.

If you don't replace the hardware, it is recommended that you BIOS discharge (open the case, there is a battery on the motherboard, take it down and wait for 1 minute before putting it back on. ）

If it still doesn't work, your computer may be poisoned, resulting in an error in the boot area of the hard disk and the hardware information cannot be read. Same as the first article, redo the system, but it is recommended that you format it.

Not in the end? Send it to the computer city, and the rest is not something that can be solved by yourself. (You opened a computer company just because I didn't say my last words).

NTFS does not support DOS, if C is NTFS format, it will not be normal.

Solution to the problem that I cannot enter the system after verifying DMI pool data after starting.

1. Set up the BIOS, set the CDROM to boot.

2. Hard disk master boot area. Use the system disk to start, use the DOS function in the system disk, enter DOS, and enter the following command.

fdisk/mbr

3, restart the system, still can't enter the system, then use the system disk, directly install the system 4, OK, successfully enter the system, no need to send it to the computer city to repair.

After the above 4 steps, the problem of verifying dmi pool data not entering the system has been solved, and it was successful after the 2nd part of the lucky one. If you still can't.,Send it to the computer city to repair it.。。。

Since you have entered the DOS, go directly to the second step, and estimate the problem of the wrong boot area of the hard disk.

dir/w/a

Check out the hidden files below!

If you can't enter the system, look at the BIOS discharge and move the jump cable to see it.

In order to reduce costs, some original machines install DOS systems, and they will naturally enter DOS after they are turned on.

On a machine like XP and Win7, unless you use the DOS boot disk to enter the DOS environment, there is no DOS, and no one will install the DOS system on the machine.

No, the main thing is to see what system the bootloader boots into.

The bootloader is launched before the system boots, so the key judgment is to look at the bootloader menu, for example, a file under windows is a bootloader menu.

Only install the DOS system, then the boot will naturally enter the DOS, just like the previous machine. After installing the Windows system, it will generally boot into Windows, unless you press F8 to choose to boot into DOS after booting.

Restart the machine, keep pressing F8--- use the up and down keys of the keypad to select the safe mode with command prompt--- confirm to enter the safe mode with command prompt--- and then enter the following command:

copy e: folder name file name c: destination folder enter.

Adjust your BIOS settings to factory defaults, and boot up and you're ready to go.

Put a system disk into the PE system and pour the data If you want to enter the DOS, get a 98 system disk and you can enter.

Get an MHHDD plate into PE and bake anything.

Yes, you need to be guided to enter the DOS, and you can't get in directly.

No way. The C drive is broken, the system is gone, and the DOS is naturally gone, unless you are a dual system and installed in other disks.

You can use DOS to boot a floppy disk, U disk or optical disc into DOS, but the hard disk is not working.

Use win98 installation disc or use the disc with DOS boot function to boot others, you can boot into DOS.

Boot must be booted with the boot disk to enter the DOS, it is recommended to reinstall the system!

Set the optical drive in the BIOS to boot first, put a disk that can be guided into the DOS into the optical drive, and start it.

Like the special edition of the computer company sold in the pirate shop, the Tomato Garden edition can be channeled into DOS).

To format the C drive, you must boot the system with a disc or USB flash drive, not a hard disk.

In addition, if your command is incorrect, you should add a colon ":" after c

Use the start path.

For example, open the Windows folder of the C drive, start C: Windows

cd space The name of the folder.

c: dir---cd * (represents the folder you want to view).

98 mounting discs.

DOS Antivirus Disk.

DOS startup disk is OK.