-
The screen is out of order, the reasons for the analysis and the solutions are as follows:
1. If the screen fails, it may be because the iPad cache is too much and it is dead, you can try to force restart the iPad to see if it can be solved.
2. In daily use, remember not to open too many background programs, and often clean up the background.
3. Sometimes the stuck screen is also related to the iPad system, please upgrade the iPad system to the latest version.
4. If none of the above methods can be solved, and you suspect that the iPad has a screen cable failure, it is recommended to go to the iPad after-sales point for testing and repair.
Such failures are usually caused by the following factors:
1. The weather is too cold.
The operating temperature of the screen is generally above freezing, which is of course a theoretical value, but in practice it may be higher. When it's cold, the screen doesn't reach the operating temperature, which is naturally reflected visually in touch glitches.
When the iPad goes from a low temperature to a relatively high temperature and is relatively humid, there will also be water mist on the original. These fogs are likely to be invisible to the naked eye but can affect their use.
2. The application fails and causes a crash.
Crash means that the machine does not respond, and the natural screen will not change. As a loyal Apple user, I haven't encountered this problem yet. If you've ever jailbroken, you'll have a better chance of encountering it.
If the temperature rises or does not respond after restarting, it is recommended to go to an Apple repair center for service.
If it is still not resolved, it may be a hardware failure, and it is recommended to send it to an Apple after-sales center for testing and repair.
-
Press the boot button and the home button for more than five seconds, and the white apple appears in the let go,Restart it,Most of them can be solved,If it still doesn't work, you can only find a third-party repair to change the touch screen and try it。
-
Answer 1: It is recommended to wipe and clean the screen first, and please avoid stains such as sweat on your hands to eliminate external interference. 2. If the mobile phone has been filmed, it is recommended to remove the film for attempt, and it is not excluded that it is caused by the quality of the film; 3. Please confirm whether it appears under the interface of individual third-party software, if so, it may be caused by software abnormality or compatibility, it is recommended to uninstall and reinstall or replace other types of software; 4. If the above operation is invalid, please back up the body data and try to restore the factory settings.
-
Apple iPad touch screen is not responding, it is caused by the failure of the iPad touch screen hardware program, you can try the following methods to solve the problem of touch screen not responding:
1. Turn off the Apple iPad, then restart it, wait for the power on to check if the iPad touch screen is normal.
2. Update the iOS system with your iPad and wait for it to return to normal. The specific operation process is as follows:
1. Take Apple iPad as an example, find the [Settings] function option in the standby interface, and click to open the next step.
2. In the settings interface, find the [General] option and click to open Next.
3. In the general interface, find the [Software Update] option and click to open Next.
4. After clicking Software Update, wait for the iPad system to check whether there is any update information.
<>3. If you can't solve the problem, you can bring the warranty card and invoice to the local Apple after-sales service center for testing and maintenance.
-
The iPad Pro screen is partially out of order, which is caused by two situations:
1. The screen cable is broken or short-circuited, and the touch layer of the inner LCD screen is faulty.
2. Problems such as the motherboard's touch chip or board layer circuits and CPU need to be detected.
The first requires a crimp or replacement motherboard.
The second requires chip repair and transplantation.
-
Summary. There are two ways to kiss, 1Power off your Apple iPad, plug in the charger, and then restart it, wait to see if the iPad touch screen is normal after powering it on.
2.To upgrade the iPad to update the iOS system, it is best to flash the phone directly and wait for it to return to normal after completion. 3.The above methods have been tried or still don't work, that is, the screen hardware problem, you need to disassemble the machine to the store to check and repair the screen.
What should I do if the Apple iPad touch screen is not responding?
There are two ways to kiss, 1Power off your Apple iPad, plug in the charger, and then restart it, wait to see if the iPad touch screen is normal after powering it on. 2.
To upgrade the iPad to update the iOS system, it is best to flash the phone directly and wait for it to return to normal after completion. 3.The above methods have been tried or still don't work, that is, the screen hardware problem, you need to disassemble the machine to the store to check and repair the screen.
Dear, you follow my method above to operate first.
How do I turn off my phone if it doesn't work?
I recently used it all day on the Internet, charging it 3 times a day, does it have anything to do with it?
It doesn't matter, I don't turn it off again, and it's no problem to charge 3 times a day, the operation is to press and hold the power button and the home button at the same time, and the ipad will automatically shut down after ten seconds.
Dear, your iPad has three buttons, you press and hold the power on button, and the volume button, 8-10 seconds can be.
If you're on an older iPad, the round one in the middle is the Home button.
If you still don't understand, you can keep the machine on until the battery runs out, and then plug it back in.
You're welcome to kiss me, you can click on my avatar to add a follow, and you can ask me any emotional questions about your mobile phone and computer later.
Good good. Uh-huh [than the heart] [than the heart] [than the heart].
The touch of the Apple mobile phone screen is out of order, can it be repaired without changing the screen?
In general, it's a matter of wiring.
It should be good to replace it. >>>More
Check whether the control cable is connected first, if it still can't be solved, it may be that the frame of the touch screen has dirt and obstructions, you can turn off the touch screen again and check the touch screen when you turn it on; If there is a problem with fixing a position all the time, it is also possible that there is a problem with the infrared and the screen needs to be changed.
As for why the iPhoneX screen failed, the answer given by Apple was a bit "cold", and the answer given was that the mobile phone was afraid of cold. When the environment of the iPhone X cools down quickly, the phone will not work. >>>More
You don't have to be so thorough, you can buy whichever one you want.