Playing CS will jump FPS 50

Updated on Game 2024-04-06
12 answers
  1. Anonymous users2024-02-07

    It's no surprise that the system of your machine is made by someone from a computer company, right? Take the tomato home and other ghost disk to do,There will be a situation like what you said,It is recommended to find a friend who can do the system to take the system disk step by step,And then all kinds of drivers are installed,Enter CS and try again,There should be no such situation!

    Press the " " key to pop up the console, enter rate 25000, cl updaterate 101, cl cmdrate 101 in turn, and press enter once for each input. Sorry if I inadvertently offended you....Have you tried these commands?

  2. Anonymous users2024-02-06

    See if it's a stand-alone machine, or a network, a stand-alone machine will be installed from one, and delete (clear the registry) before pressing it!! Certain!!! I recommend going to Dot**, if it's online, it's a matter of the network, such as:

    You Netcom, go to Telecom; The net is too narrow. , I really can't find me again, remember to write a note.

  3. Anonymous users2024-02-05

    Some LCD monitors play CS badly, and the FPS is not high (the FPS displayed is actually fake, or it depends on the refresh rate of the display). The handicap LCD even has a noticeable time delay.

    It is recommended to try a flat one, 800*600 fps can reach 100Hz, 1024*768 to 85Hz

    Also, is the vertical sync turned off? A lot of people ignore this issue

  4. Anonymous users2024-02-04

    It's best to lock FPS from the system, there are a lot of such little software.

    And then you are using an LCD screen, I think it is better to use the display mode of OpenGL than to use the D3D one, you can switch it and try to see if it works.

  5. Anonymous users2024-02-03

    Press the " " key to pop up the console, enter rate 25000, cl updaterate 101, cl cmdrate 101 in turn, and press enter once for each input. Sorry if I inadvertently offended you....Have you tried these commands?

  6. Anonymous users2024-02-02

    Landlord, is your graphics card compatible with the motherboard? Motherboard support isn't good enough.? Does it go smoothly for you to play other online games?? When did your computer be assembled?

    Then you have to look at this problem...

  7. Anonymous users2024-02-01

    Huh, huh? There are three scenarios.

    First: it's the homeowner's card.

    Second: someone is cheating.

    Third: you lose this fps max 100

    Check it out, have fun!

  8. Anonymous users2024-01-31

    This one... Only pings are skipped. Haven't heard of skipping fps. Besides, it's only possible to jump in crowded places.。。

  9. Anonymous users2024-01-30

    The next graphics card tool is to lock the fps sub.

  10. Anonymous users2024-01-29

    Solution 1: Game acceleration.

    Solution 2: Update the graphics card driver.

    2.Run the driver life to choose the recommended driver, find the graphics card in the list below and put the box in front of it, and then click on the one-click update, after the driver update is completed, click on the prompts to restart immediately, and the driver update is completed after the computer restarts.

    Solution 3: Adjust the graphics card console.

    Turn off the graphics card's V-sync.

    1.If you are an NVIDIA graphics card (N card), right-click on the blank space of the desktop, open the graphics card control panel settings, select Manage 3D settings, set the vertical sync on the right to force off, and turn it off after applying.

    2.If you are an ATI (AMD) graphics card, right-click on the blank space of the desktop, open the graphics card control panel, select All Settings in 3D, and wait for the right side to refresh vertically

    forvertiical refresh) to the performance position.

    3If you are Intel (motherboard integrated graphics card), right-click on the blank space of the desktop, select the graphics properties to open the graphics card control panel, click 3D settings (the old graphics card driver does not have this option, if not, please update the latest graphics card driver), find the asynchronous flip option set to off, and click OK.

    Solution 4: Update DirectX

    Solution 5: Install 360 Speed Browser or 360 Game Browser (for users with web game cards). You can directly click "360 Extreme Browser" from the "Function Collection" of "360 Security Guard" to automatically install it.

    Solution 6: Reduce hardware acceleration.

    Right-click in the blank space of the desktop, select "Properties", and in the pop-up interface, click "Settings", and then click "Advanced".

    2. In the pop-up interface, click "Troubleshooting", and then lower the hardware acceleration option, you can pull it to the middle position, and then click "OK".

    Solution 7: Adjust the power supply options.

    Turn up the performance in the power options.

  11. Anonymous users2024-01-28

    Graphics card problem, maybe yours is a dual graphics card, just switch to a separate graphics card!

  12. Anonymous users2024-01-27

    I don't want to dissipate the heat of the graphics card,,Buy an exhaust fan,The configuration of the game is lowered!

Related questions
8 answers2024-04-06

A lot of it is a problem with your personal settings, see if the vertical sync is turned off? And there is the opengl mode mentioned above! But don't be afraid when you play stand-alone with only more than 30 fps, because the stand-alone play + the computer will be lowered, which is very normal, you won't be so low when you go to play online, as long as the main settings above are good, it shouldn't be very low!

14 answers2024-04-06

The space bar is a jump, some places are higher, all one jump and one squat.

10 answers2024-04-06

Well, in a way, I know.

It should be like this, first of all, find the crouch key in the keyboard settings, which is ctrl. If you find the setting for this key, then you can change the white space at the end of the line to the v key. That is, at this point, the crouch key and the V key are both jumps. >>>More

25 answers2024-04-06

1. Although you admit that your network is fine, but I still want to mention that I don't know if you use an infinite router, if so, you'd better try wiring, so that it is more stable and not so easy to jump. >>>More

9 answers2024-04-06

Are you sure it's 700MB of VRAM? ·· If that's the case, you adjust the display mode, you first see if your graphics card supports D3D or OPGL display mode, and then choose the display mode that supports your graphics card in CS, which is also related to the driver, and it is best to follow the driver of the support mode of your graphics card (generally equipped with graphics cards when you buy them). >>>More