In 2003, was the power supply of the golf air conditioner out of the computer board?

In 2003, the power supply of the golf air conditioner, this was not from the computer version, because the computer version had not yet developed to a certain extent, so he was based on the consideration of the manual state.

2003 Golf Air Conditioner Power Supply. The computer version is very rare, because in 2003 its technology was not so developed, so not all of his products were put out with this computer.

I've read this, and the computer version hasn't come out yet, and it's not coming out so soon.

Hello, it is a separate module controlled ,,, air conditioning module.

There should not be such a friend in this era.

If you have any problems with these technologies, you can find those professional personnel to help test it.

Of course, it's the desktop version, because it's still very convenient and full of features. Good value for money.

I said that Gao Fu went to regulate the civil servants, did he come out with the boss? It should be possible to make the bus version of the people, no.

Well, no, no, at that time, the golf air conditioner didn't come out of the computer version.

Is the 2014 golf air conditioner power supply out of the computer version? This should be yes, check the news about this from the Internet.

Is the 2003 golf air conditioner power supply out of the computer version? Yes, that's right, the 2003 Golf air conditioner power supply came out of the computer version.

If you want a golf air conditioner power supply, it should be able to come out, right?

The switch is broken, a plug pin is broken, and the wire is bitten by mice!

1.Periodically, clean up the dust in the computer, open the case after the desktop is turned off, use a hair dryer, and blow the cold air, which is not used in the first place.

2.Usually use anti-virus software and other tools to clean up system junk and temporary files (IE cache) generated by surfing the Internet, and check and kill malware.

3.The computer configuration is poor, try to set the virtual memory to a larger one, (xp) right-click on my computer Properties Advanced Performance ......There the settings are advanced to change.

In the custom there is set to 2000 - 4000

Win7) Computer-Properties-Advanced System Settings-Performance Settings-"Advanced" Tab-Virtual Memory-Change-Select the drive C disk you want to set, select the system management size or select the custom size - Settings - OK.

4.Antivirus software installation occupies a small amount of resources, such as antivirus.

5.Try to set the IP address to a static IP to reduce the time of starvation when the computer is booted up and after entering the desktop. (Summary: This is the reason why many people can't move in the first few minutes after their computer is turned on).

6.Don't put too many files and icons on the computer desktop, which will slow down the computer's response, and try not to install the software on the C drive.

7.Close some startup programs. Start-Run-Enter msconfig-OK-Click "Start" in the "System Configuration Utility" window-Start, except for the input method (ctfmon) and anti-virus software, the general program can be turned off.

You can also use software such as Guardian to intelligently optimize boot acceleration.

8.It is recommended to install only one main antivirus software, and installing multiple side anniversaries will occupy computer resources and make the computer slower.

9.Regularly defragment the disk, open my computer to defragment the disk - Properties - Tools - select the defragmented disk to open the "Disk Defragmenter" window - analyze - defragment - the system will start to defragment.

10.Install security software for a full check-up computer repair! The current system also occupies a large amount of memory, and if necessary, adding multiple memories will be much faster.

The computer hard disk is used for a long time, it will also make the computer slower, repartitioning and installing can fix the logic is bad, the computer will be faster, and the physical read and write speed of the hard disk is slow, and it can only be changed to a better point!

If the economic conditions allow, it is more practical to buy a new one, although the replacement power supply can still be used, but the configuration of a few years ago may not be able to keep up with the hardware performance of the same price now, and the continued use of other hardware is not guaranteed that there will be no problems, if you have more money to upgrade, it is also a good choice.

As long as the other hardware is not broken, it can be used, and it is recommended that if you don't play the computer often, you can only change the power supply.

Specifically, depending on what configuration, what purpose, and how much budget, if you need to use it frequently now and the old host cannot meet the existing needs, and the budget is enough, it is recommended to directly replace the new machine.

If you don't use it often, change the power supply.

1. First disassemble the side bezel of the chassis, 2. First check where the charred location is, whether it is in the motherboard or the power supply.

3. If you can't see it, remove the motherboard and power supply, and smell it with your nose, the burning smell is from that part.

4. Use the power load meter to detect whether the power supply is normal, 4. If the power supply is normal, then connect the power supply to the motherboard, check whether the motherboard is powered on, if it is not powered on, it means that the motherboard is faulty.

The most direct way is to unplug the power supply socket of the motherboard, separate the power supply from the motherboard, plug the power supply back on, and use a short wire to answer the green and black 2 wires on the output line of the power supply.

As you said, this situation should be a problem with the power supply, because the motherboard is not powered when it is turned off, only the power supply and the mains are connected!

If the host power supply burns out, there is generally a sound (the moment when the power supply of the plug-in board is turned on), if the indicator light of the host will flash when the power is turned on, it is generally a motherboard problem.

The motherboard is less likely to break than the power supply, and if it is turned on, there is no reflection at all. Check the power supply fan, if the fan is normal, and then change the power supply to check the motherboard.

Go borrow a power supply and change it, see if it's okay....

The result should be understandable to you yourself....

Test the power supply separately, unplug all the power connectors from the motherboard, and then short the green and black wires of the power output plug, if the power supply is not broken, the power supply fan will turn. If it doesn't turn, the power supply is broken.

Location: On the left side under the dashboard!

Year: Personally, I think it should be the same year as the car!!

Model: The model of the vehicle is its model!

The reason why the fan of the outdoor unit of the air conditioner does not turn.

1. The indoor unit of the air conditioner does not have electricity to the outward unit, so the outdoor unit does not rotate;

2. Indoor, outdoor and signal lines are not connected, short circuit or open circuit;

3. The starting capacitor capacity of the compressor of the outdoor unit of the air conditioner is not enough or the drum is blown out and other reasons;

4. Check whether the fan of the external fan rotates, if it does not turn, see if the external fan has electricity over, if so, look at the capacitance of the external fan, if it is good, see if the motor is bad (detect with a multimeter), if the fan does not turn to the compressor to work, then due to a long time, the thermal protection of the external unit of the air conditioner will also shut down, and the internal machine will not blow the cold air out;

5. The compressor of the outdoor unit is broken (use a multimeter to measure whether the resistance value of the three piles of the compressor is normal, whether it is short-circuited to the ground, and whether the compressor is locked and cannot be rotated.)

Measure whether there is voltage on the pump head, if there is no voltage, check the input signal of the controller;

If there is voltage, check whether the pump head coil is still on.