Hello, I recently bought a Merida 550, how do I modify the disc brake?

Theoretically, as long as your front fork or rear fork has a base for installing a clamp, you can install disc brakes, warrior550 I took a look, there is no base before and after, the difficulty is relatively large, it is recommended to give up, if the landlord really wants to install it, you may want to try the following methods:

First of all, change the fork and buy a XCT or other fork that can be fitted, 150 yuan.

Then change the front hub, a single front axle should be enough for 80 yuan, Quantum's on the line, the front axle doesn't love bad anyway.

Pay for the BB5 clamp and disc before paying, about 100 yuan.

In this way, it costs about 350 yuan to be able to install the front disc and the rear v....

Personally, I don't feel very necessary, just for the landlord's reference.

It depends on what you are used to do, the role is not the same, the needs are different, for example, the long-distance commuting is recommended to the V brake, the V brake ratio of the disc brake maintenance is convenient and not easy to break, etc., the disadvantage is that the braking force is not strong, and it is easier to reduce the effect than the disc brake in case of water or bad conditions. If it is a mountain, do not play any action, do not pursue what difficulty is recommended front and rear disc brakes, disc brake sensitivity and strong braking force can make you turn the brake freely, when the bumps on the bad road are relatively large, you can only free up a finger to brake, disc brake can, V brake is definitely not good, if the strength is greater, you can also replace the front brake with hydraulic disc brake, because the brake is 70% by the front brake. It's up to you how you use it and how you like to ride it.

If it is a V-brake frame fork, you can also change it to a hydraulic V-brake, and the braking ability is also quite strong, but it is not low.

Is it a warrior or a duke, if it is a warrior, it is recommended not to upgrade, it is too troublesome, it is estimated that the upgrade will be bare after the upgrade, if it is a duke, give you the upgrade order, fork, wheel, pressure plate (or direct shift kit) If the landlord upgrades the disc brake, you can change a split finger dial on the oil disc or on the BB7 without changing the finger

No, the hub does not have a disc brake in place. Or to say that hubs aren't designed for disc brakes.

To press the disc brake, change the hub first. The replacement of the hubs also involves reprogramming the spokes and adjusting the rim. Therefore, it is generally necessary to change the wheel directly, unless it is a fever to a certain extent, and you must want disc brakes, otherwise it is not recommended to change.

You need to change the wheel to change the disc brake.

First, the brake also screams after the low-grade disc brake is wet.

Second, the frame of the Warrior 560 does not have disc brakes, and the fork does not have disc brakes.

3. The hub of the Warrior 560 does not have disc mounting holes.

If you want to install disc brakes, you can only replace the front brakes with disc brakes, and you have to replace the fork and wheels at the same time, so the money for such a set is not far from a 560.

Therefore, it is not recommended to replace the disc brake, the cost is too high.

The safest brake with the most braking force: BB7.

It is easy to lock during emergency braking, shortening the braking distance. Sometimes it's the difference between safety and an accident!

You only need to change the brakes, but it would be nice to be able to change the discs. More than three hundred,.

The BB5 is one grade lower, and it is better than your original brakes, two hundred yuan.

You don't have to change anything else.

Yes, we can ride ordinary bicycles that can be equipped with disc brakes, which is certain. Play boldly.

Directly on the Duke 350No need to change it. It was originally a disc brake. It's about the same amount of money you spend on modifying disc brakes.

It seems that it can't, I remember asking in the store.

There is no disc brake seat of the ruler source section, only Lingyu can change the front fork to install the front, not cracked touched so meaningless, the hub has to replace the spokes according to the situation, according to the current bb5, the fork, bb5, the hub, add up to more than six hundred, not worth it.

Hello, I am doing **, I have Merida Warrior 550 modified disc brake or modified quick release accessories, modified disc brake kit whether your car has a disc brake seat can be modified, in our store modified disc brake success has almost more than 400 cases, modified quick disassembly has more than 1,000 cases, which need to change the disc brake need to change the hub, the disc brake caliper comes with a mounting bracket, which can be directly fixed on the front and rear forks, as long as the hub is replaced and installed is very convenient, welcome to like the modification of the riders to join, in the ** search "Friends of Bicycles" You can go directly to my store, you can directly ask customer service, our store also has car repair tools, bicycle repair parts, maintenance supplies, riding supplies, etc., **fair, welcome to collect.

Absolutely not, first of all, the hub of the 550 does not support disc brake drops, even if the hub that supports disc brakes is replaced, the frame of the 550 is not equipped with a reserved port for disc brakes, and there is no way to install disc brakes!

Mine is also 550 555 I have always wanted to change the disc brake, because I am used for mountaineering, but unfortunately there is no disc brake behind the 550 frame, it can't be installed, it has nothing to do with the hub, even if you can, you have to rearrange the width of the car after changing the hub, you have to change the wheels, it's not cost-effective, save money to buy a disc brake like me.

It's not very understandable, but it's sure that it can be changed, and you have to change the hub!

The front plug of your car is still good, press it to see if it is lubricated, and you can't do maintenance (refueling). Disc brakes! When you buy it, ask the outlets whether they have their own brake cables, and if not, you have to buy them, otherwise the original V brake line is not long enough, and the car can be directly equipped with disc brakes, and there is no need to change any parts.

It is understood that the BB5 disc brake needs to be equipped with a special brake lever to give full play to its performance, which I don't think is necessary.

To modify the disc brake, with oil brake, much better than the line brake, BB5 is not good, the line does not have to buy by yourself, will match, reduce the brake? I don't understand, the brakes are too hard, so I tune them loosely, they are too hard, they will burst

BB5 is about 270 to buy brake cables and wire pipes.

I'm using BB5!

This disc brake is mounted on the Duke 500 and it works!

You need to change a fork that supports disc brakes 300+, change a hub or wheel set with disc brake seat 150+ 300+, and then buy a disc brake caliper 300+ and a disc 160+.

Upgrade the general D brake is not as good as not rising. . . You might as well change to a better set of V-brakes.

The feel of the D brake (that is, the mechanical D brake) of the line pull is actually not as good as the feel of the better V brake.

In terms of performance, which is better, a 200-yuan D brake or a 200-yuan V brake? Hehe.

Changing the disc brake mainly depends on the fork, the warrior can, the hub is generally 200 400 can be done (plus steel rim and other things within 600 yuan), the disc brake 100 500 yuan, according to their own money (by the way, shimano 421 V brake is not bad, 100 yuan a pair).

No, if you really want to change it, you can change your front plug to a disc brake, so your front kill is a disc brake. In fact, if you like disc brakes, just change to Duke Pro. Even if the Warrior puts on the disc brakes, it won't work very well.

It should be possible, it seems that it can be done for a few thousand dollars.