Campus network The network cable is not connected properly, you can use broadband, but you can t acc

If you can access other web pages normally, but this campus network can not be accessed normally, then first determine whether others can log in to this normally**, if so, it means **normal, the problem should be in the machine. After locating the problem, first detect whether your firewall is blocking access to this **, or close the firewall for a short time to see if you can enter, if it can, it is a firewall policy problem, turn on the firewall to carefully check the rules and eliminate the blocking of this **.

You mentioned that there is a damaged device on the third floor, and you should also check whether your computer is under the damaged device, if you want to access the campus network through this device, then the reason may be caused by this device, you can also move the computer to the classmates who can try it, if it works, it means that your computer is fine, and the problem is likely to be in the damaged device.

If you have access to broadband, it means that your computer's network is running normally. Depending on the problem you described, if you just can't open the campus network and open other web pages without problems, it may be that there is a problem with your IE, or the local DNS settings are faulty. You can go to a super bunny online to clean up your IE temporary files and cache, and at the same time, it is best to clean up the junk files in the system as well.

After the cleanup is complete, open it and take a look, so it should be fine.

My thoughts are just a guess.

From the administrator said that the module on the second floor is broken.

The third floor is not on the third floor, and the third floor is the only one you can't use the campus network.

Your network access point may not be on the third floor.

Rather, it is a module on the second floor.

If the central switch can be divided into VLANs, and each layer is set to control the access port, your network cable access may be in the broken group of modules.

You can try moving your computer to the next dorm room. If you can. My guess is valid.

It has nothing to do with the computer. It also has nothing to do with the network cable network card. Rather, it has a relationship with the point of access.

You can access the Internet is your network card normal. You said that it is not a fixed IP, so you did not manually specify the IP address. The school will never allow this kind of automatic IP acquisition. You should find your school's network center and get an IP. That's it.

The campus network is a local area network, and whether he can access the server or not is mainly decided by the gateway. There are certain limits to the progression.

The campus network is not a copper ** line network cable made of ADSL. It is similar to the fiber optic cable of the Internet café, but the transmission rate is lower than that of the fiber optic cable and higher than the ** line. So he's a separate network. But the difference is that the campus network can be connected to any telecom network.

Should your school be a fixed IP or dial-up? If it's a fixed IP, try to change the IP on the dial, then it's probably a problem with the hub, lz + me, so I can't tell clearly.

You give insufficient information.

The only way. Find your school.

Routes and lines are managed by them.

Summary. The campus broadband connection is not good, hello, the campus network shows that the connection but the reasons for not connecting to the network are: 1. Network failure.

2. Equipment failure. Solution: 1. Turn on the mobile phone to start the wifi, select the name of the campus wifi, and click to connect.

2. After connecting, the login authentication page will automatically pop up, please click. 3. This is the page that is out of order. 4. Open the browser that comes with the phone, and enter the numeric IP address in the ** column.

As soon as you enter the number part, you will be prompted to log in to the window. 5. At this time, a new login interface will pop up, and if you want to enter the password again, there will be a hint of password on the left side of the login interface. Click Login to go to the prompt login success screen.

I hope my answer is helpful to you, and finally I wish you good health and a happy mood again! <>

There is no broadband connection on campus.

The campus broadband connection is not good, hello, the campus network shows that the connection but the reasons for not connecting to the network are: 1. Network failure. 2. Equipment failure.

Solution: 1. Turn on the mobile phone to start the wifi, select the name of the campus wifi, and click to connect. 2. After connecting, the login authentication page will automatically pop up, please click.

3. This is the page that is out of order. 4. Open the browser that comes with the phone, and enter the numeric IP address in the ** column. As soon as you enter the number part, you will be prompted to log in to the window.

5. At this time, a new login interface will pop up, and if you want to enter the password again, there will be a hint of password on the left side of the login interface. Click Login to go to the prompt login success screen. I hope my answer is helpful to you, and finally I wish you good health and a happy mood again!

I've just applied for campus broadband, what should I do if I come back?

It's broadband, it's not a campus network.

Hello dear, Broadband Failure Error**126691: The reason for the error may be the wrong password of the user, the problem of the user's client or the problem of the computer terminal; Handling suggestions: a. Please send it to the 10001999 to get the password again and enter the correct password; b. The user re-updates the latest client program; c. User substitution terminal processing; d. Please ask the branch to conduct on-site investigation; (2) Broadband Obstacle Error **126678:

The cause of the error is the user's device and computer network card, and it is recommended to check the device and cable connection, restart the device if necessary, and then restart it.

The reasons why the school network cable is plugged in and there is no network are as follows:

1. First of all, change the router port to determine whether the router port is broken.

2. Change the network cable or use the line tester to test the network cable on-off and the quality of the crystal head.

3. Replace the network card or computer to test whether the network card is broken.

After the above three steps, you will definitely be able to eliminate the fault that the network cable is not connected.

Campus Card Introduction:

Campus cards are divided into temporary and official cards. When the new students registered, most of the students were able to get the official campus card, and a few students were unable to make a card because of incomplete information. Students who have received a temporary card should go to the Campus Card and Fee Service Center of their campus to replace the official card within one month of the start of the semester.

Deposit machine recharge:

The trap storage machine is a kind of self-service terminal equipment of the campus card system, which mainly provides the function of transferring money from the bank card to the campus card, and the trap memory machine can also report the loss and unhang the campus card, modify the campus card password, modify the consumption bending liquid limit, pay the campus network fee, hot water fee and air conditioning fee, etc.

It is worth mentioning that only the debit card of the Bank of China issued by the school can be recharged through the circle storage machine, and the two cards correspond, that is, you cannot use your own bank card to recharge the campus card of others.

At the beginning of the new semester, there will be a lot of students who use the trap machine, so you should pay attention to choosing the time. <>

The reason why the campus network connection is successful but the Internet cannot be accessed:

1. If there is a fault in the campus network itself (unable to access the Internet), it is recommended to contact the campus network maintenance staff to solve the problem due to non-user personal reasons.

2. There is a problem with the computer system, take the 360 disconnected first aid kit as an example

Open 360 Security Guard, click and select "All Tools", find the "Disconnected First Aid Kit" tool among all tools and run the software to check and solve network problems.

If it can't be solved, it will be disabled by the campus firewall, a firewall specially set up by the school to prevent students from surfing the Internet!

Not being able to connect to the Internet may not be a problem with the network cable, it is very likely that the problem is on the computer, whether your network number is locked and cannot be used.

1. Check it first, open the online neighbor, see if the local connection is grayed out, if it is grayed out, re-enabled, it can be used.

2. It may be that you have not logged in your account and password, and you can only use it when you log in.

3. Also check whether it is a problem with the network cable you bought, you can borrow a computer from your roommate in the same dormitory, connect this network cable, and try to see if it can be used.

Do I have to handle the school's campus network broadband? Campus broadband is necessary. Campus broadband is a broadband, interactive and professional local area network.

The development platform of multi-professional teaching soft judgment, multi-professional demonstration classroom, teacher preparation system, electronic reading room, and teaching and examination database can all be run on the network. It is very necessary to bring eggplant, contact with external information at school, and it is very desirable for you to rush to check the network on the Internet, and finally find a job, you also need to press, and the campus broadband is relatively cheap.

Summary. Do I have to handle the school's campus network broadband? The school's campus network broadband does not necessarily need to be handled, it can be handled if it is needed, and it is not necessary to handle it if it is not needed.

Does the school's campus network broadband excitation refer to the removal of the belt must be handled? The campus network broadband of the school does not necessarily have to be handled, it needs to be handled, and it is not necessary to handle it.

I'm sorry I don't understand, but can you elaborate on that?

Do I have to handle the school's campus network broadband? The school's campus network broadband does not necessarily need to be handled, it can be handled if it is needed, and it is not necessary to handle it if it is not needed. Does the school's campus network broadband excitation refer to the removal of the belt must be handled?

The school's campus network broadband does not necessarily need to be handled, it can be handled if it is needed, and it is not necessary to handle it if it is not needed. Do I have to handle the school's campus network broadband? The campus network broadband of the school does not necessarily have to be handled, it needs to be handled, and it is not necessary to handle it.

Do I have to handle the school's campus network broadband? The school's campus network broadband does not necessarily need to be handled, it can be handled if it is needed, and it is not necessary to handle it if it is not needed. Do I have to handle the school's campus network broadband?

The school's campus network broadband does not necessarily need to be handled, it can be handled if it is needed, and it is not necessary to handle it if it is not needed.

Dear users, hello! According to your description.

You can try the following methods to solve the problem:

a) Reinstallation: Uninstall the original client, turn off the protection software (such as 360 Security Guard, 360 Antivirus, etc.), and right-click the client.

Install the file and run the reinstall once as administrator.

b) Reinstall in safe mode: uninstall the original client first, restart the computer and press F8, select "Antuan with network in full mode", and run the reinstallation as an administrator after entering the system.

c) Manually install the driver.

1) Convert the corresponding driver message file in the "chinatelecom dialmanager" folder in the installation directory of e-Surfing Campus client.

"Copy to directory C: Windows INF (Win8 system copy)".

2) Copy the file in the installation directory of Tianyi client to the C: Windows System32 Drivers directory.

3) Right-click on "Local Connection", select "Properties", and click "Install".

4) Select "Services" in the pop-up window and click "Add".

5) In the pop-up window, select "Install from disk".

6) Manually select the path of the driver information file and click "OK" (Win8 Browse C: Windows

7) Click "OK" and the installation is successful.

At present, Anhui Telecom Network Department carries out relevant mobile phone preferential activities. If you need to buy a phone, please log in to the Anhui Telecom network hall** to buy the latest mobile phone. If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom, and get 2 yuan for 100 yuan.