How does the automatic case sealer work? Whose automatic sealing machine is the best?

There are many manufacturers of the sealing machine, but its working principle is the same, the following is to (Liyue packaging) automatic sealing machine as an example: use tape to seal the upper and lower bottom of the packaging carton, the automatic sealing machine can also automatically adjust the height and width of different packaging sizes, suitable for mass production. After the product is packed, it is sent to the sealing machine through the conveyor chain (belt, roller), and handed over to the box conveying mechanism, and the two sides of the carton are clamped by the box clamping belt and moving forward.

The front short tongue is automatically bent by the tongue depressor, and when the rear short tongue enters the roller of the sealing machine in the carton, there is a detection signal (photoelectric signal) to notify the action of the tongue punching cylinder, and the tongue punch frame will bend it, and at the same time, there is a signal to notify the glue melter to automatically spray glue. The carton continues to move forward, the left and right long tongues are automatically bent to the middle through the guide rod, and at the same time, the belt of the pressing mechanism simultaneously presses the left and right long tongues of the carton, so that the box, tongue and glue together to complete the sealing and shaping action, that is, the last process of product packaging - automatic sealing.

There are many types of sealing machines and manufacturers, but the principles are almost the same. As far as I know more about the all-round folding lid sealing machine (Smecta Intelligence): after the product is packed, it is sent to the sealing machine through the roller line, and the two sides of the carton are clamped by the box belt to continue to move forward, first complete the front and back, left and right all-round folding of the cover, and then complete the upper and lower tape sealing at the same time, and the whole sealing action is over.

This all-round folding and sealing machine also has some of its own characteristics, on the basis of realizing the one-time completion of folding and sealing the box, it has added an automatic scanning and identification function, which will automatically adjust the sealing width according to the size of the carton, so as to avoid the problem of jamming caused by irregular boxes. The tape applicator is equipped with an induction device, which automatically stops when the tape falls off and the length is insufficient, so as to avoid the failure of sealing and causing safety risks.

The packaging and sealing machine is economical and has high stability.

Automatic lid folding and sealing machine.

Guangkuo packaging is a professional equipment manufacturer engaged in sealing machine and unpacking machine.

The models are complete. Mainly include: semi-automatic sealing machine, automatic sealing machine, automatic folding lid sealing machine opening hole, automatic folding and sealing machine, corner sealing machine, e-commerce sealing machine, foam box sealing machine, I-shaped sealing machine.

Stable performance. The company has a professional technical and production team, many years of experience accumulation, many case practices, and a perfect after-sales system.

The company has a professional service after-sales system, rapid response, to ensure customer 24-hour production safety.

Cost-effective. Advanced technology and well-known products dismantle the electrical configuration of the brand. Reasonable equipment**.

Suzhou Maike hot collector Kai shrinking machine series, sealing and cutting packaging machine series, wrapping machine series, packing machine series, sealing machine series, vacuum machine series, assembly line series of the first rotten call column, packaging material series. Detail plus v: liumengxiang9696

Technical support: There is a special R&D institution to support the development of new products and quality improvement.

Company tenet: quality first, service for sincerity, reputation for the most!

The automatic case packer is one of the components of the automatic case packing production line. Its main function is to automatically seal the packed products and complete the last process of product packaging.

Main components: height adjustment mechanism, pressing mechanism, box conveying mechanism, width adjustment mechanism, frame, hot melt adhesive system, etc.

Working principle: After the product is packed, it is sent to the sealing machine through the conveyor chain (belt and roller), and handed over to the box conveying mechanism, and the two sides of the carton are clamped by the box belt and move forward. The front short tongue is automatically bent by the tongue depressor, and when the rear short tongue enters the roller of the sealing machine in the carton, there is a code beam which detection signal (photoelectric signal) notifies the action of the tongue cylinder, and the tongue frame bends it, and at the same time there is a signal to notify the glue melter to automatically spray glue.

The carton continues to move forward, the left and right long tongues are automatically bent to the middle through the guide rod, and the belt of the pressing mechanism simultaneously presses the left and right long tongues of the carton synchronously, so that the box, tongue and glue together to complete the sealing and shaping action, that is, the latest code of product packaging after a process - automatic sealing.

The structure of the automatic sealing machine.

The general sealing machine is divided into 16 parts, namely:

1. a rack. 2. Workbench adjustment tripod.

3. Conveying the transmission belt.

4. Power switch.

5. Emergency stop switch.

6. a guide rod.

7. The guide rod locks the handwheel.

8. Lower the movement.

9. a guide wheel. 10. a guide pressing plate.

11. The guide wheel locks the hand wheel.

12. Upper movement.

13. Sealing tape.

14. Transmission.

15. a lifting rocker handle.

16. a slag chain auxiliary workbench.

A dismantling like a box sealer is divided into 16 parts, respectively.

1. a rack. 2. The workbench adjusts the buried bridge tripod.

3. Conveying the transmission belt.

4. Electric bending Yumengyuan switch.

5. Emergency stop switch.

6. a guide rod.

7. The guide rod locks the handwheel.

8. Lower the movement.

9. a guide wheel. 10. a guide pressing plate.

11. The guide wheel locks the hand wheel.

12. Upper movement.

13. Sealing tape.

14. Transmission.

15. a lifting rocker handle.

16. an auxiliary workbench.

Generally, the sealing machine is divided into 16 parts, which are the collapse and dismantling of the stove.

1. a rack. 2. Workbench adjustment tripod.

3. Conveying the transmission belt.

4. Power switch.

5. Emergency stop switch.

6. a guide rod.

7. The guide rod locks the handwheel shirt elimination.

8. Lower the movement.

9. a guide wheel. 10. a guide pressing plate.

11. The guide wheel locks the hand wheel.

12. Upper movement.

13. Sealing tape.

14. Transmission.

15. a lifting rocker handle.

16. a hidden jujube auxiliary workbench.

The pneumatic sealing machine is mainly used for carton sealing, and there is a exploded view below:

The width of the sealing tape. mm power supply.

220v, 50hz, 180w

The maximum sealing size (width * height such as ruler).

500* 600mm

Minimum sealing size (W*H).

140*150mm

Technical parameters: Top and side with belt drive oak, suitable for heavy products Power supply: 1p 110v 220v 50hz 60hz 300w 470w speed:

30 boxes Sealing size: L150 W120 480 H120 480 (mm) Tape size: 48 72 (mm) kraft paper tape, BOPP tape Machine size:

L1090mm x W890mm x H1280mm Shipping Dimensions: L1200mm x W1050mm x H1435mm Gross Weight Net Weight: 250kg 200kg Optional Accessories:

1.External drum table 2Caster mega height 3

Made of stainless steel, the sealing machine adopts the tape sealing carton sealing, which is economical, fast and easy to adjust, and can complete the upper and lower sealing actions at one time, and can also use printing tape, which can improve the product image and is the first choice for automated packaging enterprises. The key component of the case sealer is the drive motor. The more powerful the motor, the better.

The sealing machine can be divided into semi-automatic sealing machine, automatic sealing machine, automatic sealing machine, folding lid sealing machine, corner sealing machine, and side sealing machine. Dajiang sealing machine is characterized by lightweight and durable, simple operation; It is widely used in home appliances, electronics, food, dairy products, oil, cosmetics, beverages, electrical appliances and other manufacturing industries.

Equipment power 220V, 50Hz, 400W

Sealing width: 140mm 500mm can be customized according to the requirements of accompanying customers.

Sealing height: 180mm, Lushoufeng, 520mm, can be customized according to customer requirements.

Table height: 650mm, 800mm, can be customized according to customer requirements.

The common use method of Elida sealing machine: it is used in conjunction with a slotted sealing machine to form an I-shaped sealing; Stand-alone use; Combined with a fully automatic unpacking machine;

1) First of all, the flat box is restored to weigh the carton, and then the lid of the carton is folded with the goods. Then it is to adjust the sealing size of the sealing machine according to the size of the carton and achieve the appropriate position.

2) The operator gently pushes the carton, and the carton will automatically advance and automatically complete the sealing work up and down at the same time under the action of the conveyor belt of the sealing machine.

3) All the cycles and so on, and then when the carton is sealed, the carton can be removed directly.

The automatic sealing machine is mainly suitable for the sealing and packaging of cartons, which can be used as a stand-alone machine or with the assembly line, and is widely used in household appliances, textiles, food, department stores, medicine, chemical and other industries. The sealing machine uses tape to seal the carton, which is economical, fast and easy to adjust, and can complete the automatic sealing action of the upper and lower boxes at one time, such as the use of printing tape, which can improve the product image.

1.The structure of the sealing machine uses a screw and a chain to adjust the width of the two widths synchronously. 2.The new patented tape sticker for imported sealing machine accessories is adopted, and the patented tableting device is used to make the tape stand upright and not bent down and cannot be pasted, and the sealing and packaging are convenient.

3.The width of the belt is designed for better grip. The ring buckle connection design will not cause degumming and breakage, and it is very easy to replace the belt with the sealing machine, which is convenient and fast.

4.The sealing tape manufacturer independently innovates the large-scale transmission wheel design, increases the bending arc, increases the belt contact area, the belt will not slip, and the service life is extended, and the sealing machine technology is very mature. The main drive mechanism of the professional sealing machine uses a special bearing seat with high precision and low noise to increase the service life of the belt.

5.The length of the tape chamfer at both ends of the carton can be adjusted.

6.The sealing machine factory designs a belt-free alarm series and an automatic shutdown device for opening the door to ensure the safety of maintenance. The workflow of the automatic case sealer.