What is the coarse grinding process of resin dry grinding discs?

After the resin material and glue are stirred, in the production operation, in the form of liquid, unlike the water grinding disc powder, which is easy to fly, the stirred powder is poured into the molding abrasive, and the mold is removed with a special fixture and put into the oven to bake for 20 minutes, the baking temperature is about 70, and the curing is formed. In this way, the resin dry grinding disc is produced, and the resin combined dry grinding disc is mainly used for grinding and polishing the surface of various stones, and the stone is not stained. Excellent quality, reasonable, is an ideal dry grinding and polishing tool.

Resin dry grinding disc coarse grinding treatment method: terrazzo floor, concrete colored sand floor, dry sprinkle hardener floor with uniform exposed sand, according to the hardness of the floor, select the concrete soft (dry) grinding disc and concrete dry grinding disc with a particle size of 30, and use the concrete dry grinding disc with a particle size of 100 to match the medium and large grinding machine to improve the grinding efficiency and make the ground flatness better; After the ground leveling treatment, choose the high particle size (100) concrete dry grinding disc for rough grinding.

Terrazzo floor, concrete colored sand floor, evenly exposed sand dry sprinkle hardener floor, so that the resin dry grinding disc is produced, resin combined with dry grinding disc is mainly used for grinding and polishing of various stone surfaces, and the stone is not stained. Excellent quality, reasonable, is an ideal dry grinding and polishing tool. When working, the workpiece should be ensured to be fixed, and the profile positioning should conform to the direction of the knife, so as not to cause abnormal cutting, do not apply side pressure or curve cutting, and the feed should be stable to avoid the impact of the blade contacting the workpiece, which will lead to the damage of the grinding disc, or the workpiece flying out, and accidents.

After coarse grinding treatment, the ground is usually selected to use the concrete soft (dry) grinding disc with the above-mentioned particle size of 300 for fine grinding treatment, and the use of supporting medium and large grinding machines can improve the grinding efficiency and make the ground flatness better. <>

When the resin dry grinding disc is coarsely grinded, if the sound and vibration are abnormal, the cutting surface is rough, or the smell is generated, the operation must be terminated immediately, checked in time, and the fault must be eliminated to avoid accidents. When starting and stopping cutting, do not feed too fast to avoid tooth breakage and breakage. If you cut aluminum alloy or other metals, use a special cooling lubricant to prevent the wear disc from overheating, producing paste, and other damage that will affect the quality of the cut.

The equipment chip chute and slag suction device ensure smooth flow to prevent slag accumulation and blocking, which affects production and safety. When dry cutting, do not cut continuously for a long time, so as not to affect the service life and cutting effect of the resin dry diaphragm.