How to achieve dual wire access for home PCs

You can buy a dual-wire router (dual WAN port), otherwise you won't be able to achieve the function you want. The reason is simple, the computer must have an IP address and a gateway at the same time. But now the system can only have one active gateway.

If you have two lines of internet, the gateway is not the same. Even if they are all connected, only one gateway is active. There can only be one line to connect the Internet.

If you don't want to buy a two-wire router. You can find any ordinary computer. Do soft routing (install windows server2003, there are relevant settings in it, but at least 3 network cards are required), the Internet cafes in my city are as small as 100, and as large as 1000 are all made of soft routing.

500 ordinary Internet cafes. A P4 computer is sufficient. But the memory should be larger, you only have 2 units at home, and a P3 one is enough.

The specific configuration, you can go to the Internet to check it, I don't understand it very well.

The easiest way. Connect a telecom network cable, and then connect a Netcom network cable. The network cable that connects to the telecom while playing the telecom game. When playing Netcom games, change to the same network cable that you use to play Netcom. Guangdong Telecom is about 100 a month. Netcom's 60s or so.

You either pull double wires, or rent a ** server! Routers are available in major shopping malls, and there are 100 200 in general, and the quality is OK! Thank you!

This doesn't seem to matter. Telecommunications is from the South, and Netcom is from the North. Even if you play normally, you will get a bit stuck.

The route depends on what you want. Probably give you a ** 80 and 100 too. After buying the router, the box inside has a manual.

With a dual-port router, Tengda's is about 650 yuan.

Contradictory. The method of dual network cards is not needed, can you have dual access to a single network card on your computer?

You don't use a telecom network, and if you don't have another network, is it interesting to have two lines?

The way to realize the dual network access of the computer:

1. Buy a wireless network card and insert it into the computer, if the computer comes with a wireless network card, then you don't need to buy it.

3. If you only want to use Netcom, then disconnect the wireless signal; If you only want to use telecommunications, then disconnect the network communication number; To disconnect and connect, you only need to click with the mouse, and you don't need to do anything with the external device, which is very convenient and practical.

4. If you want the whole bedroom to be free to use Netcom and telecommunications, it depends on whether the interface of your Netcom network connection computer is ** port or network port, if it is ** port, then buy a dial-up cat with wireless function; If it's a network port, then buy a router with wireless function.

5. The configuration of the dial-up cat and the router is equipped with an instruction manual and a warranty card when buying the equipment, and the instruction manual talks about how to use and set up; There is technical advice in the warranty card, in order to not understand the manual, you can call** to seek help from the manufacturer.

6. Of course, if there is no wireless network card on the computer, you have to buy a wireless network card and plug it in to search for wireless signals. When you use it, if you want to use Netcom, connect it to Netcom wireless signal; If you want to use telecommunications, connect to the telecom wireless signal. It's quick and easy.

1. Both computers must have a network cable interface (there is an ordinary network card port, which can be an integrated network card).

2. Some network cards can automatically adapt to the network cable line sequence, some cannot, and most of them should not.

3. If it can automatically adapt to the network cable sequence, the connection method of the network cable crystal head is mostly according to the B sequence of the standard connection.

4. If it is not possible to automatically adapt to the network cable sequence, one end of the network cable crystal head shall be connected according to the B sequence of the standard connection, and the other end shall be connected to the A order of the standard connection.

5. Please refer to the following for the twisted pair network cable connection.

Network cable sequence TIA568A class standard connection:

green-white, green, orange-white, blue, blue-white, orange, brown-white, brown-white".

Network cable line sequence TIA568B class standard connection:

orange-white, orange, green-white, blue, blue-white, green, brown-white, brown-white".

6. The operating system can correctly set the IP and network sharing of the two computers.