Does the 6300 have the ability to browse paired Bluetooth devices?

Seems to have a bluetooth spy jar software that can! But only phone-to-phone! You can browse the resources on each other's phones! It can also be controlled via Bluetooth!

Turn on the power switch of Bluetooth, and keep it in the state of being found, generally press and hold the power button for more than 3 seconds, turn on the Bluetooth of the mobile phone, start searching, when you find the device to see the model, is it your Bluetooth model, yes, choose to connect.

You still need to install the Nokia PC suite, otherwise it will not be recognized. This is true even with Bluetooth.

It doesn't seem to have this feature.

There is no automatic pairing for the Bluetooth of the Apple mobile phone, but there is generally automatic pairing when the Bluetooth device is turned on, so turn on the Bluetooth of the mobile phone first, and then turn on the Bluetooth of the device to automatically connect.

iPhone and Bluetooth device can't connectSolution:

1. Turn off Bluetooth, then restart your iPhone, and then turn Bluetooth back on.

2. If the device still can't connect, we can try to forget the paired device and reconnect it.

3. Try resetting the network settings. Doing so will cause the wifi settings to be cleared as well, and we will need to rejoin the wifi network.

4. Factory reset your iPhone or update to the latest iOS version.

Hello, Mr. Mobile Phone E will answer for you!

There is no automatic pairing for Bluetooth on Apple mobile phones, but there is generally automatic pairing when the Bluetooth device is turned on, so it will not be automatically connected when the Bluetooth device is turned on first, and then when the Bluetooth of the iPhone is turned on. According to the above, turn on the Bluetooth of the mobile phone first, and then turn on the Bluetooth of the device to automatically connect.

It is estimated that other devices that can't automatically connect with iPhone Bluetooth are also partly due to this reason, you can try this method to solve the problem.

Currently in use 6S (Japanese version), headset Meizu EP51.

In the case of already pairing, after turning on the earphone switch at close range, the phone will automatically turn on the Bluetooth headset and connect it.

I found it by accident, and I was stunned at first how I didn't turn on Bluetooth and connected the headphones myself. I've tried it a few times since then, and it's all been like this.

1. Turn on the Bluetooth switch and dial it to ON. Double-click the Bluetooth icon in the taskbar in the lower right corner, or run "Bluetooth Devices" in the Control Panel and select "Add" to start searching for Bluetooth devices.

2. In the pop-up "Add Bluetooth Device Wizard", select the option "My device has been set up and ready to be found", and click Next.

4. Select "Let me choose my own key" in the next prompt box and enter the key of my own design; Click Next.

5. There will also be a corresponding prompt on the mobile phone, prompting you to enter the key or passcode (different mobile phone prompts are different), enter the same key as the one just set on the notebook on the mobile phone, and after confirmation, the notebook will automatically continue the subsequent configuration.

Extension: Bluetooth function:

Bluetooth is a radio technology that supports short-range communication between devices (typically within 10 meters). Enables wireless information exchange between a wide range of devices, including mobile**, PDAs, wireless headsets, laptops, related peripherals, and more. The standard for Bluetooth is that it works in a frequency band with a bandwidth of 1mb s.

Bluetooth supports voice and data transmission; The use of radio technology, the transmission range is large, and it can penetrate and diffuse between different substances; Frequency hopping spread spectrum technology is adopted, which has strong anti-interference and is not easy to eavesdrop. The use of spectrum that is not restricted in all countries and, in theory, does not have interference problems; Low power consumption; Low cost.

If you have a problem with your classmate's phone, first confirm whether the Make the device visible to other devices option is turned on after Bluetooth is turned on his phone.

Glad to answer your questions! You and your classmates must have Bluetooth turned on on their phones. Then, look for a new Bluetooth device, if you find a new device to be paired, you need both parties to enter the same password (usually 0000 can also be set by yourself) when pairing, in order to pair successfully.

It should be your classmate's Bluetooth setting problem, you can take a look at it.

Bluetooth headset and mobile phone connection: the mobile phone should first turn on Bluetooth and be in the discovered state, press and hold the Bluetooth headset button until the mobile phone Bluetooth searches for the earphone and displays the earphone model, and then tap the headset model displayed in the mobile phone to connect (sometimes you also need to enter the PIN code, the default is generally "1234.")."), and the display of "Connected" indicates that the connection is successful, and then you can release the earphone on/off button.

The following takes the Conexin Bluetooth headset as an example to talk about the specific connection steps with the mobile phone for reference:

1. When the earbuds are off, press and hold the multi-function button for about 5 seconds, and the voice prompts will be "powered on" and "pairing", and the red and blue indicators will flash rapidly and alternately;

3. Select the Bluetooth model name (such as "Y4") from the Bluetooth device list of your phone or other devices and connect (if asked to enter a password, enter "0000"). After the connection is successful, the voice prompt "Fiber closed Bluetooth is connected". You can use the call function and listen to the audio on your mobile phone or other devices.

There are also bluetooth headsets to connect to the mobile phone with the following methods:

1. In the state of the earbuds powered off, press and hold the NFC function (about 10 seconds), the blue light will flash first, don't be excited at this time, continue to press and hold until the earphone indicator appears red and blue flashing alternately, and enter the state of being searched. (Remember that the earbuds must be in the searched state before they can be searched by other Bluetooth devices.) ）

3. Click to connect, after the connection is successful, the earphone indicator destruction light will be displayed as a blue light flashing at intervals.

I don't know under what circumstances such a problem occurs.

Is it because the other party is using a mobile phone that does not have the function of Bluetooth transmission, so you can't find its device?

Besides. I can't think of anything else possible. Bluetooth generally doesn't break.

It's really not good, you try to get off the machine, but before the grid machine, pass the useful things in your **book into the memory card, take out the card and then carry out the grid, press *

。I don't recommend lattice machines...

I suggest that if it's a problem with the machine itself, go to customer service.

That's no device, do you have headphones or a mobile phone? If you want to set the earbuds, you have to set them to pairing mode to find them.

There is one in the Bluetooth settings"Device visibility"?

Select"It is displayed all the time"..

Please,There's no mobile phone or Bluetooth headset next to it.,How did you find it?。。。