Why is the water shortage indicator of garment steamer always on?

Hello, is it possible that you have water in your water tank, but the lack of water is always on?

There are several reasons for this problem.

1 The automatic water filling cover under the water tank is broken (that is, the cover that needs to be unscrewed when adding water to the water tank, and it cannot flow down automatically,) It is recommended that you go to the dealer to replace a 7 0% is the reason.

2. The water inlet of the heating pot inside the machine has no way to flow into the heating pot due to too much scale, so the solution is to solve it.

You can buy a pack of descaler to clean the water dispenser, remove the water tank of the garment steamer, then pour the descaler into the water inlet of the garment steamer, heat it with electricity for 5 minutes, and then open the drain of the garment steamer to let the water in the machine flow out. Rinse twice with purified water, so that you can have a cleaning effect.

29% for this reason.

3 The indicator is broken, basically it can't be a diode, 1% of this case!

Thank you! Good luck, true self, life sharing, bright light!!

Check whether the water inlet is blocked, or the water outlet at the bottom of the tank is blocked, or because the water outlet is small. The alarm power off is the protection of the machine.

Huaguang - the art of steam.

Because of lack of water. Well, you talk about the brand and model first, otherwise no one will kill you.

The garment steamer indicator light does not light up and does not produce steam, what is going on, hello dear, the indicator light does not light up after the garment steamer is plugged in, and the reason is as follows: 1. The garment steamer is not energized. The garment steamer suddenly does not work because the garment steamer is not energized, the switch of the garment steamer is damaged, or the electric board is short-circuited due to water leakage of the garment steamer, which will cause the garment steamer to be unenergized, and the plug needs to be unplugged to see if there is a short circuit problem in the garment steamer.

2. The garment steamer does not produce steam. If the garment steamer does not work, it may also be that there is no water vapor spray out of the garment steamer, the pipe is blocked, or the water level is insufficient, which will cause no water vapor to spray out of the garment steamer, and the water temperature needs to be increased above the lowest scale line, and if the pipe is blocked, it needs to be dredged. 3. The steam indicator light is not on.

The garment steamer will not work if the steam indicator light is not on, you need to wait for the steam indicator light to turn on, turn on the task button of the water pump, and you can continue to use it after the task light of the water pump is on, the steam indicator light is not lit to indicate that there is no steam generation, and the light will not turn on until it starts to generate steam. I hope that Envy can help you.

First of all, turn on the power supply for a while, and see if there is a temperature in the part of the tube closest to the machine, and then use your ears to listen to whether there is a sound in the nozzle, if there are no two, you are thinking about whether there is a dry burn, if there is a dry burn, then it is the heat inside the insurance burning, this is afraid that you can't repair it, take it to the after-sales service, if the lower end of the tube is a little warm, it is too much water alkali, the heat is too big, get a bottle of white vinegar from the water tank, pour it into the machine, soak it for a few hours, turn on the power and boil it for a few minutes, rinse it with water, it's almost the same You try it.

There are three main reasons for this:

1. The thermostat of the heating pot in the garment steamer.

It's broken and the thermostat needs to be replaced.

2. If there is no electricity, it is the fuse of the garment steamer.

Burned, replace the fuse.

3. It may be that there is too much scale blocking the steam outlet, and it is necessary to clean the internal water tank of the garment steamer with a mixture of water and vinegar.

The power indicator light of the garment steamer will go off as soon as it is on, and it will not work.

The indicator light of the household garment steamer is on but does not work, and there is no steam coming out, generally there are the following reasons: 1. The main machine will heat up, but no steam appears, at this time, it may be that the water inlet of the garment steamer is blocked, disconnect the power supply, and deal with the water inlet. 2. The host has the sound of boiling water, but there is no steam, this situation may be that the steam pipe of the garment steamer or the outlet hole of the nozzle is blocked, and it is enough to clean up the steam duct or the outlet hole of the head.

3. The garment steamer is not used for a long period of time, and there is no steam when it is used again, and it cannot be solved after using the previous method, it may be that the internal structure of the garment steamer is faulty, and it is necessary to contact after-sales service or professionals to solve it.